Before Driving
Windows
Auto-opening/closing
Jam-safe window
To fully open the window automatically,
press the switch completely down, then
release. The window will fully open
automatically.
If a person's hands, head or an object
blocks the window during the auto-closing
operation, the window will stop and open
halfway.
To fully close the window automatically,
pull the switch completely up, then
release. The window will fully close
automatically.
WARNING
Make sure nothing blocks the window
just before it reaches the fully closed
position or while holding up the power
window switch:
Blocking the power window just before
it reaches the fully closed position or
while holding up the power window
switch is dangerous.
To stop the window partway, pull or press
the switch in the opposite direction and
then release it.
Power window system initialization
procedure
If the battery was disconnected during
vehicle maintenance, or for other reasons
(such as a switch continues to be operated
after the window is fully open/closed),
the window will not fully open and close
automatically.
In this case, the jam-safe function
cannot prevent the window from
closing all the way. If ¿ngers are
caught, serious injuries could occur.
The power window auto function will only
resume on a power window that has been
reset.
NOTE
ꢀ ꢀ
Depending on driving conditions, a
1. Switch the ignition ON.
2. Make sure that the power window lock
switch located on the driver's door is
not depressed.
3. Press the switch and fully open the
window.
4. Pull up the switch to fully close the
window and continue holding the
switch for about 2 seconds after the
window fully closed.
closing power window could stop
and start opening when the window
feels a shock that is similar to
something blocking it.
ꢀ
In the event the jam-safe function
activates and the power window
cannot be closed automatically, pull
and hold the switch and the window
will close.
ꢀ ꢀ
The jam-safe window function does
not operate until the system has been
reset.
3
–38
English 
