2002-2007 Mazda 2 SUV Interior Features -> Bluetooth? User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Interior Features -> Bluetooth? for Your Mazda 2 SUV First Generation (2002-2007)

Interior Features  
Bluetooth®  
Bluetooth®*  
Bluetooth® Hands-Free outline  
When a Bluetooth® device (mobile phone) is connected to the vehicle's Bluetooth® unit via  
radio wave transmission, a call can be made or received by pressing the talk button, pick-  
up button, or hang-up button on the audio remote control switch, or by operating the centre  
display. For example, even if a device (mobile phone) is in your coat pocket, a call can be  
made without taking the device (mobile phone) out and operating it directly.  
Bluetooth® audio outline  
When a portable audio unit equipped with the Bluetooth® communication function is paired  
to the vehicle, you can listen to music stored on the paired portable audio device from the  
vehicle's speakers. It is not necessary to connect the portable audio device to the vehicle's  
external input terminal. After programming, operate the vehicle audio control panel to play/  
stop the audio.  
NOTE  
ꢀ ꢀ  
For your safety, a device can be paired only when the vehicle is parked. If the vehicle  
starts to move, the pairing procedure will end. Park the vehicle in a safe place before  
pairing.  
The communication range of a Bluetooth® equipped device is about 10 meters (32 ft)  
ꢀ ꢀ  
or less.  
Basic audio operation is available using voice commands even if Bluetooth® is not  
ꢀ ꢀ  
connected.  
ꢀ ꢀ  
For safety reasons, operation of the centre display is disabled while the vehicle is being  
driven. However, items not displayed in grey can be operated using the commander  
switch while the vehicle is being driven.  
*Some models.  
5
–91  
Interior Features  
Bluetooth®  
CAUTION  
Some Bluetooth® mobile devices are not compatible with the vehicle. Consult an  
Authorised Mazda Repairer, Mazda's call centre or Web support centre for information  
regarding Bluetooth® mobile device compatibility:  
Phone:  
(Germany)  
0800 4263 738 (8:00—18:00 Central European Time)  
(Except Germany)  
00800 4263 7383 (8:00—18:00 Central European Time)  
(Worldwide)  
49 (0) 6838 907 287 (8:00—18:00 Central European Time)  
Web:  
Applicable Bluetooth® speci¿cation (Recommended)  
Type A/Type B: Ver. 2.0  
Type C/Type D: Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0 (conformity)  
Component Parts  
Audio unit  
Type A/Type B  
Type C/Type D  
Talk button, Pick-up button and Hang-up button  
Talk button  
Pick-up button  
Hang-up button  
Microphone  
Microphone  
5
–92  
Interior Features  
Bluetooth®  
Microphone (hands-free)  
The microphone is used for speaking voice commands or when making a Hands-free call.  
Talk button, Pick-Up button and Hang-Up button (hands-free)  
The basic functions of Bluetooth® Hands-Free can be used for such things as making calls or  
hanging up using the talk, pick-up and hang-up buttons on the steering wheel.  
Commander switch (Type C/Type D)  
The commander switch is used for volume adjustment and display operation. Tilt or turn the  
commander knob to move the cursor. Press the commander knob to select the icon.  
Volume adjustment  
The power/volume dial of the audio unit*1 or the volume dial of the commander switch*2  
is used to adjust the volume. Turn the dial to the right to increase volume, to the left to  
decrease it.  
The volume can also be adjusted using the volume button on the steering wheel.  
*1 Type A/Type B  
*2 Type C/Type D  
NOTE  
If the volume is lower compared to other audio modes, increase the volume from the  
device side.  
(Type C/Type D)  
Conversation volume and the volume of the voice guidance and ringtone can each be set in  
advance.  
1. Select the  
2. Select  
icon on the home screen to display the Communication screen.  
.
3. Adjust the  
and the  
using the slider.  
5
–93  
Interior Features  
Bluetooth®  
Bluetooth® Preparation (Type A/  
Type B)  
16.If “Yes”, the system switches to the  
device registration mode. If “No”, the  
system returns to standby status.  
Bluetooth® Hands-Free Preparation  
Device pairing  
Pairing code setting  
To use Bluetooth® Hands-Free, the device  
equipped with Bluetooth® has to be paired  
to the Bluetooth® unit using the following  
procedure.  
The 4-digit pairing code setting for  
registration of your cell phone (pairing)  
can be set beforehand.  
A maximum of seven devices including  
hands-free mobile phones and Bluetooth®  
audio devices can be paired to one vehicle.  
NOTE  
The initial setting value is “0000”.  
NOTE  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
ꢀ ꢀ  
A device can be paired only when  
the vehicle is parked. If the vehicle  
starts to move, the pairing procedure  
will end. Pairing is dangerous while  
driving - pair up your device before  
you start driving. Park the car in a  
safe place before paired.  
3. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, Edit, Delete, List, or Set pin  
Code.”  
6. Say: [Beep] “Set pin code”  
7. Prompt: “Your current pin code is  
XXXX. Do you want to change it to a  
different pairing pin code?”  
If a Bluetooth® device has already  
been paired to the vehicle as a  
ꢀ ꢀ  
Bluetooth® audio device, it does not  
need to be paired again when using  
the device as a hands-free mobile  
phone. Conversely, it does not need  
to be paired again as a Bluetooth®  
audio device if it has already been  
paired as a hands-free mobile phone.  
8. Say: [Beep] “Yes”  
9. Prompt: “Please say a 4-digit pairing  
code.”  
ꢀ ꢀ  
Since the communication range of  
a Bluetooth® equipped device is  
about 10 meters (32 ft), if a device  
is placed within a 10-meter (32  
ft) radius of the vehicle, it may be  
detected/paired unintentionally while  
another device is being paired.  
10.Say: [Beep] “YYYY”  
11.Prompt: “YYYY is this correct?”  
12.Say: [Beep] “Yes” or “No”  
13.If “Yes”, go to Step 14. If “No”, the  
procedure returns to Step 9.  
14.Prompt: “Your new pairing pin code is  
YYYY. Use this pin code when pairing  
devices to the Hands free system. Do  
you want to pair a device now?”  
15.Say: [Beep] “Yes” or “No”  
5
–94  
Interior Features  
Bluetooth®  
1. Activate the Bluetooth® application of  
the device.  
NOTE  
Say a paired “device tag” within 10  
seconds.  
NOTE  
If more than two devices are to be  
paired, they cannot be paired with the  
same or similar “device tag”.  
For the operation of the device, refer to  
its instruction manual.  
2. Press the pick-up button or talk button  
with a short press.  
3. Say: [Beep] “Setup”  
4. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
14.Prompt: “Adding XXXXXX - - - (Ex.  
“Stan's device”) (Device tag). Is this  
correct?”  
15.Say: [Beep] “Yes”  
16.Prompt: “Pairing complete”  
After a device is registered, the system  
automatically identi¿es the device. By  
activating Bluetooth® Hands-Free again,  
or by activating Bluetooth® Hands-Free  
¿rst after switching the ignition from  
OFF to ACC, the system reads out a voice  
guidance, “XXXXXX - - - (Ex. “Stan's  
device”) (Device tag) is connected”.  
5. Say: [Beep] “Pairing options”  
6. Prompt: “Select one of the following:  
Pair, edit, delete, list, or set pin code.”  
7. Say: [Beep] “Pair”  
8. Prompt: “Start the pairing process on  
your Bluetooth® device. Your pin code  
is 0000 (XXXX). Input this on your  
Bluetooth® device. See device manual  
for instructions.”  
NOTE  
9. Using the device, perform a search  
for the Bluetooth® device (Peripheral  
device).  
ꢀ ꢀ  
When the pairing is completed, the  
symbol is displayed.  
NOTE  
Some Bluetooth® audio devices need  
ꢀ ꢀ  
For the operation of the device, refer to  
its instruction manual.  
a certain amount of time before the  
symbol is displayed.  
Device registration can also be done  
ꢀ ꢀ  
by operating the audio unit.  
Depending on the device, the  
registration status may be lost after a  
certain period of time. If this occurs,  
repeat the entire process from Step 1.  
10.Select “Mazda” from the device list  
searched by the device.  
11.Input the 4-digit pairing code to the  
device.  
12.Prompt: “Please say the name of the  
device after the beep.”  
ꢀ ꢀ  
13.Say: [Beep] “XXXX - - -” (Speak a  
“device tag”, an arbitrary name for the  
device.)  
Example: “Stan's device.”  
5
–95  
Interior Features  
Bluetooth®  
Registered device read-out  
Bluetooth® Hands-Free can read-out the  
devices registered to its system.  
7. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. Device A, device B,  
device C)” (The voice guidance reads  
out the device tags registered to the  
hands-free system.)  
NOTE  
Press the talk button with a short press  
during the read-out at the desired  
device, and then say one of the  
following voice commands to execute  
it.  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to  
be effective.  
ꢀ
 
ꢀ
“Select phone”: Selects device (Mobile  
phone) when the talk button is short-  
pressed.  
ꢀ
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
ꢀ
 
“Select music player”: Selects device  
(Music player) when the talk button is  
short-pressed.  
“Edit”: Edits device when the talk  
button is short-pressed.  
3. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, edit, delete, list, or set pin code.”  
6. Say: [Beep] “List”  
ꢀ
 
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
 
“Continue”: Continues the list read-  
out.  
ꢀ
 
“Delete”: Deletes the registered device  
when the talk button is short-pressed.  
“Previous”: Returns to the previous  
device in read-out when the talk button  
is short-pressed.  
ꢀ
 
8. Prompt: “End of list, would you like to  
start from the beginning?”  
9. Say: [Beep] “No”  
10.Prompt: “Returning to main menu.”  
Device selection  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a different  
paired device, it is necessary to change the  
link. The order of device priority after the  
link has been changed is maintained even  
when the ignition is switched off.  
5
–96  
Interior Features  
Bluetooth®  
(Hands-free phone)  
9. Prompt: “XXXXX... (Ex. device B...)  
(Device tag) selected.”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
NOTE  
3. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
4. Say: [Beep] “Select phone”  
5. Prompt: “Please say the name of  
the device you would like to select.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
6. Say: [Beep] “X” (Say the number for  
the mobile phone to be connected.)  
7. Prompt: “XXXXX... (Ex. device B...)  
(Registered device tag) is this correct?”  
8. Say: [Beep] “Yes”  
ꢀ ꢀ  
When the selected device connection  
is completed, the or symbol is  
displayed.  
Some Bluetooth® audio devices need  
ꢀ ꢀ  
a certain amount of time before the  
or symbol is displayed.  
Device (Music player) selection can  
also be done by operating the panel  
button.  
ꢀ ꢀ  
Deleting a device  
Registered devices (Mobile phone) can be  
deleted individually or collectively.  
9. Prompt: “XXXXX... (Ex. device B...)  
(Device tag) selected.”  
NOTE  
(Music player)  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to  
be effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
4. Say: [Beep] “Select music player”  
5. Prompt: “Please say the name of  
the device you would like to select.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device B),  
XXXXX... (Ex. device C). Which  
device please?”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
4. Say: [Beep] “Pairing options”  
6. Say: [Beep] “X” (Say the number for  
the music player to be connected.)  
7. Prompt: “XXXXX... (Ex. device B...)  
(Registered device tag) is this correct?”  
8. Say: [Beep] “Yes”  
5
–97  
Interior Features  
Bluetooth®  
5. Prompt: “Select one of the following:  
7. Prompt: “Please say the name of the  
device you would like to edit. Available  
devices are XXXXX... (Ex. device A),  
XXXXX... (Ex. device B), XXXXX...  
(Ex. device C). Which device please?”  
8. Say: [Beep] “X” (Say the number of  
the device to be edited.)  
Pair, edit, delete, list, or set pin code.”  
NOTE  
A registered device (Mobile phone) can  
be deleted using the registration list.  
9. Prompt: “New name please?”  
10.Say: [Beep] “XXXXX... (Ex. device  
C)” (Speak a “device tag”, an arbitrary  
name for the device.)  
11.Prompt: “XXXXX... (Ex. device C)  
(Device tag), is this correct?”  
6. Say: [Beep] “Delete”  
7. Prompt: “Please say the name of  
the device you would like to delete.  
Available devices are XXXXX... (Ex.  
device A), XXXXX... (Ex. device  
B), XXXXX... (Ex. device C), or all.  
Which device please?”  
12.Say: [Beep] “Yes”  
13.Prompt: “New name saved.”  
8. Say: [Beep] “X” (Say the number of  
the device to be deleted.)  
NOTE  
Say “All” to delete all devices (Mobile  
phone).  
9. Prompt: “Deleting XXXXX... (Ex.  
device B...) (Registered device tag). Is  
this correct?”  
10.Say: [Beep] “Yes”  
11.Prompt: “Deleted”  
Registered device editing  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, edit, delete, list, or set pin code.”  
6. Say: [Beep] “Edit”  
5
–98  
Interior Features  
Bluetooth®  
Bluetooth® Audio Preparation  
Bluetooth® audio device set-up  
Bluetooth® audio pairing, changes,  
deletions, and display of paired device  
information can be performed.  
Type B  
*
*
*
1. The mode changes as follows each time  
the menu button (  
) is pressed.  
Select “BT SETUP”.  
Type A  
*
*
* Depending on the mode selected, the  
indication changes.  
*
5
–99  
Interior Features  
Bluetooth®  
2. Turn the audio control dial and select a  
desired mode.  
NOTE  
If a Bluetooth® device has already  
ꢀ ꢀ  
been paired to the vehicle as a hands-  
free mobile phone, it does not need  
to be paired again when using the  
device as a Bluetooth® audio device.  
Conversely, it does not need to be  
paired again as a hands-free mobile  
phone if it has already been paired as  
a Bluetooth® audio device.  
ꢀ ꢀ  
Device registration can also be done  
using voice recognition.  
Display  
PAIR  
DEVICE  
Mode  
Function  
Bluetooth® audio  
device pairing  
Concerning the operation of a Bluetooth®  
audio device itself, refer to its instruction  
manual.  
Pairing mode  
Changing link to  
Bluetooth® audio  
device  
LINK  
CHANGE mode  
Link change  
Some Bluetooth® audio devices have PIN  
codes (four digits). Refer to the audio  
device's instruction manual because the  
pairing procedure differs depending on  
whether it has a PIN code or not.  
Pairing  
PAIR  
DELETE  
Deleting link to  
Bluetooth® audio  
device  
deletion  
mode  
Device  
information  
display mode information  
Displaying vehicle's  
Bluetooth® unit  
DEVICE  
INFO  
Pairing a Bluetooth® audio device which  
has a four-digit PIN code  
1. Using the audio control dial, select  
the pairing mode “PAIR DEVICE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
3. Press the audio control dial to  
determine the mode.  
Bluetooth® audio device pairing  
Any Bluetooth® audio device must be  
paired to the vehicle's Bluetooth® unit  
before it can be listened to over the  
vehicle's speakers.  
A maximum of seven devices including  
Bluetooth® audio devices and hands-  
free mobile phones can be paired to one  
vehicle.  
2. Press the audio control dial to  
determine the mode.  
After “ENTER PIN” is displayed on  
the audio display for three seconds,  
“PIN 0000” is displayed and the PIN  
code can be input.  
5
–100  
Interior Features  
Bluetooth®  
3. Input the PIN code of your Bluetooth®  
audio device by pressing channel preset  
buttons 1 to 4 while “PIN 0000” is  
displayed.  
NOTE  
Some Bluetooth® audio devices need  
a certain amount of time before the  
ꢀ ꢀ  
Press channel preset button 1 to input  
the ¿rst digit, 2 for the second, 3 for the  
third, and 4 for the forth. For example,  
if the PIN code were “4213”, press  
channel preset button 1 four times (1,  
2, 3, 4), button 2 twice (1, 2), button  
3 once (1), and button 4 three times  
(1, 2, 3). If the “PIN 0000” display  
disappears before ¿nishing the PIN  
code input, repeat the procedure from  
Step 1.  
“ ” symbol is displayed.  
If the pairing failed, “Err” Àashes for  
three seconds.  
Pairing cannot be performed while  
the vehicle is moving. If you attempt  
to perform pairing while the vehicle  
is moving, “PAIR DISABLE” is  
displayed.  
ꢀ ꢀ  
ꢀ ꢀ  
If seven Bluetooth® audio devices  
have already been paired to the  
vehicle, pairing cannot be performed  
and “MEMORY FULL” is displayed.  
Delete one paired device to pair  
another one.  
ꢀ ꢀ  
NOTE  
Some devices accept only a particular  
pairing code (Usually, “0000” or  
“1234”).  
If pairing cannot be completed, refer  
to the owner's manual of your mobile  
device, and try those numbers if  
necessary.  
Pairing a Bluetooth® audio device which  
does not have a four-digit PIN code  
1. Using the audio control dial, select  
the pairing mode “PAIR DEVICE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio set up” for details.)  
2. Press the audio control dial to  
determine the mode. After “ENTER  
PIN” is displayed on the audio display  
for three seconds, “PIN 0000” is  
displayed and the PIN code can be  
input.  
4. Press the audio control dial while the  
input PIN code is displayed.  
“PAIRING” Àashes on the display.  
5. Operate the Bluetooth® audio device  
and set it to the pairing mode while  
“PAIRING” is Àashing.  
6. When the pairing is completed, “ ” and  
“PAIR SUCCESS” are displayed after  
about 10-30 seconds, after which  
3. Press the audio control dial while “PIN  
0000” is displayed.  
“PAIRING” Àashes on the audio  
display.  
“PAIR SUCCESS” continues to be  
displayed for three seconds, and then  
the unit returns to the normal display.  
4. Operate the Bluetooth® audio device  
and set it to the pairing mode while  
“PAIRING” is Àashing.  
5
–101  
Interior Features  
Bluetooth®  
5. As the Bluetooth® audio device  
requires a PIN code, input “0000”.  
6. When the pairing is completed, “ ” and  
“PAIR SUCCESS” are displayed after  
about 10-30 seconds, after which  
Device selection  
If several devices have been paired, the  
Bluetooth® unit links the device last  
paired. If you would like to link a different  
paired device, it is necessary to change the  
link. The order of device priority after the  
link has been changed is maintained even  
when the ignition is switched off.  
“PAIR SUCCESS” continues to be  
displayed for three seconds, and then  
the unit returns to the normal display.  
NOTE  
1. Using the audio control dial, select the  
link change mode “LINK CHANGE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
ꢀ ꢀ  
If pairing cannot be completed, try  
“1234” instead. Refer to the owner's  
manual of your mobile device for the  
right PIN code.  
2. Press the audio control dial to  
determine the mode.  
Some Bluetooth® audio devices need  
ꢀ ꢀ  
a certain amount of time before the  
3. The name of the currently linked  
Bluetooth® audio device is displayed.  
If no Bluetooth® audio device is  
currently linked, the name of the ¿rst  
device among the paired devices is  
displayed.  
4. Turn the audio control dial to select the  
name of the device you would like to  
link.  
“ ” symbol is displayed.  
If the pairing failed, “Err” Àashes for  
ꢀ ꢀ  
three seconds.  
Pairing cannot be performed while  
ꢀ ꢀ  
the vehicle is moving. If you attempt  
to perform pairing while the vehicle  
is moving, “PAIR DISABLE” is  
displayed.  
If seven Bluetooth® audio devices  
ꢀ ꢀ  
have already been paired to the  
vehicle, pairing cannot be performed  
and “MEMORY FULL” is displayed.  
Delete one paired device to pair  
another one.  
Device name 1  
Device name 2  
Device name 3  
Device name 4  
Device name 5  
Device name 6  
Device name 7  
5
–102  
Interior Features  
Bluetooth®  
5. Press the audio control dial to select the  
device you would like to link.  
NOTE  
Some Bluetooth® audio devices need  
a certain amount of time before the  
“ ” symbol is displayed.  
ꢀ ꢀ  
The “ ” symbol disappears, and  
“PAIRING” Àashes in the audio  
display.  
ꢀ ꢀ  
If a hands-free type mobile phone has  
been the most recently paired device,  
the Bluetooth® unit links this device.  
If you would like to use a Bluetooth®  
audio type device which has been  
previously paired to the Bluetooth®  
unit, the link must be changed to this  
device.  
If an error occurs while trying to link  
a device, “Err” Àashes in the display  
for three seconds, and the display  
returns to “LINK CHANGE”. If this  
occurs, check the pairing status of  
the Bluetooth® audio device and the  
location of the device in the vehicle  
(not in the luggage compartment/  
boot or a metal-type box), and then  
try the link operation again.  
NOTE  
When “GO BACK” is selected and the  
audio control dial is pressed, the display  
returns to “LINK CHANGE”.  
6. If the link to the desired device is  
successful, the “ ” symbol is displayed  
again, together with “LINK  
ꢀ ꢀ  
CHANGED”. “LINK CHANGED” is  
displayed for three seconds, then it  
returns to the normal display.  
ꢀ ꢀ  
Device selection can also be done  
using voice recognition.  
H o w t o c o n ¿rm the device currently  
linked  
Switch to the link-change mode. (Refer to  
“Changing the link to a Bluetooth® audio  
device”)  
The device name displayed ¿rst is the  
device which is currently linked.  
5
–103  
Interior Features  
Bluetooth®  
Deleting a device  
6. Rotate the audio control dial clockwise  
and switch the display to “SURE ?  
YES”.  
1. Using the audio control dial, select the  
pairing delete mode “PAIR DELETE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth® audio device set-up” for  
details.)  
2. Press the audio control dial to  
determine the mode.  
3. The name of the ¿rst device among the  
paired devices is displayed.  
NOTE  
The display changes as follows  
depending on whether the audio  
control dial is rotated clockwise or  
anticlockwise.  
-Clockwise: “SURE ? YES” displayed  
-Anticlockwise: “SURE ? NO”  
displayed  
4. Rotate the audio control dial and select  
the name of the paired device you  
would like to delete.  
7. Press the audio control dial to delete  
the selected device.  
Device name 1  
Device name 2  
Device name 3  
NOTE  
Select “GO BACK” and press the audio  
control dial to return to the “PAIR  
DELETE” display.  
Device name 4  
Device name 5  
8. “PAIR DELETED” is displayed for  
three seconds after the deletion is  
completed, and then it returns to the  
normal display.  
Device name 6  
Device name 7  
NOTE  
If an error occurs while trying to delete  
the paired device, “Err” Àashes in the  
display for three seconds and the display  
returns to “LINK DELETE”.  
NOTE  
Only the names of paired devices can  
be displayed. If only one device is  
paired, only the name for this device is  
displayed.  
5. If a selection other than “GO BACK”  
is made and the audio control dial is  
pressed, “SURE ? NO” is displayed.  
5
–104  
Interior Features  
Bluetooth®  
Bluetooth® audio device information  
display  
Available Language (Type A/Type  
B)  
1. Using the audio control dial, select the  
pair device information display mode  
“DEVICE INFO” in the “BT SETUP”  
mode. (Refer to “Bluetooth® audio  
device set-up” for details.)  
The available languages are English,  
French, Spanish, Italian, German, Dutch,  
and Portuguese. If the language setting  
is changed, all of the voice guidance and  
voice input commands are done in the  
selected language.  
2. Press the audio control dial to  
determine the mode.  
3. The name of the Bluetooth® unit device  
is displayed.  
NOTE  
ꢀ ꢀ  
If the language setting is changed,  
4. Rotate the audio control dial to select  
the information for the Bluetooth® unit  
which you would like to view.  
device registration is maintained.  
Phonebook records are not cleared,  
ꢀ ꢀ  
but each language has a separate  
phonebook. Therefore, entries  
created in one language will need to  
be re-entered in the phonebook of the  
new language.  
Device name  
BT address  
ꢀ ꢀ  
Do these steps before you start  
driving. These less used functions  
are too distracting to undertake while  
driving until you are fully familiar  
with the system.  
NOTE  
When “GO BACK” is selected and the  
audio control dial is pressed, the display  
returns to “DEVICE INFO”.  
(Method 1)  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
4. Say: [Beep] “Language”  
5. Prompt: “Select a language: English,  
French, Spanish, Italian, German,  
Dutch, or Portuguese.”  
5
–105  
Interior Features  
Bluetooth®  
6. Say: [Beep] “French” (Speak the  
desired language: “English”, “French”,  
“Spanish”, “Italian”, “German”,  
“Dutch”, or “Portuguese”)  
5. Prompt: “Please wait. Switching to  
French phonebook. French selected.”  
(Spoken in the newly selected  
language).  
NOTE  
Voice Recognition (Type A/Type B)  
Other language settings can also be  
made while in the current setting by  
saying the name of the language in the  
native pronunciation.  
In this section, the basic operation of the  
voice recognition is explained.  
Activating Voice Recognition  
To Activate the Main Menu: Press the  
pick-up button or talk button with a short  
press.  
7. Prompt: “French (Desired language)  
selected. Is this correct?”  
Ending Voice Recognition  
8. Say: [Beep] “Yes”  
9. Prompt: “Please wait. Switching to  
French phonebook. French selected.”  
(Spoken in the newly selected  
language).  
Use one of the following methods:  
ꢀ ꢀ  
Press and hold the talk-button.  
ꢀ ꢀ  
Press the hang-up button.  
Skipping Voice Guidance (for faster  
operation)  
(Method 2)  
1. Press the pick-up button or talk button  
with a short press.  
Press and release the talk-button.  
2. Say: [Beep] “French” (Say the desired  
language: “English”, “French”,  
“Spanish”, “Italian”, “German”,  
“Dutch”, or “Portuguese”). (Change  
the desired language by saying the  
language name.)  
NOTE  
The Bluetooth® Hands-Free system  
ꢀ ꢀ  
is operable several seconds after the  
ignition is switched to ACC or ON  
(requires less than 15 seconds).  
ꢀ ꢀ  
When operating the audio unit or  
NOTE  
the A/C while using Bluetooth®  
Hands-Free, the beep sounds or voice  
guidance (audio unit)/cannot be  
heard.  
Other language settings can also be  
made while in the current setting by  
saying the name of the language in the  
native pronunciation.  
3. Prompt: “Would you like to change  
the language to French (Desired  
language)?”  
4. Say: [Beep] “Yes”  
5
–106  
Interior Features  
Bluetooth®  
Tutorial  
To prevent a deterioration in the voice  
recognition rate and voice quality, the  
following points should be observed:  
The tutorial explains how to use  
Bluetooth® Hands-Free.  
To activate the tutorial, do the following:  
ꢀ ꢀ  
The voice recognition cannot be  
performed while voice guidance or  
the beep sound is operating. Wait  
until the voice guidance or the beep  
sound is ¿nished before saying your  
commands.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Tutorial”  
3. Follow the prompts to receive the  
appropriate voice guidance instructions.  
ꢀ ꢀ  
Dialects or different wording other  
than hands-free prompts cannot be  
recognised by voice recognition. Speak  
in the wording speci¿ed by the voice  
commands.  
Commands useable anytime during  
voice recognition  
“Help” or “Go Back” are commands  
which can be used at anytime during voice  
recognition.  
ꢀ ꢀ  
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
Do not speak too slow or too loud.  
Speak clearly, without pausing between  
words or numbers.  
Close the windows to reduce loud  
noises from outside the vehicle, or turn  
down the airÀow of the air-conditioning  
system while Bluetooth® Hands-Free is  
being used.  
Help function use  
ꢀ ꢀ  
The help function informs the user of all  
the available voice commands under the  
current conditions.  
ꢀ ꢀ  
ꢀ ꢀ  
1. Say: [Beep] “Help”  
2. Follow the prompts to receive the  
appropriate voice guidance instructions.  
ꢀ ꢀ  
Make sure the vents are not directing air  
up towards the microphone.  
Returning to previous operation  
This command is for returning to the  
previous operation while in the voice  
recognition mode.  
NOTE  
Say: [Beep] “Go Back”  
If the voice recognition performance is  
not satisfactory.  
Refer to Voice Recognition Learning  
Function (Speaker Enrolment) (Type A/  
Type B) on page 5-109.  
Refer to Troubleshooting on page  
5-147.  
5
–107  
Interior Features  
Bluetooth®  
Using Bluetooth® Hands-Free with a  
password  
Security Setting (Type A/Type B)  
If a password is set, the system cannot be  
activated unless the password is input.  
1. Press the pick-up button or talk button  
with a short press.  
NOTE  
2. Prompt: “Hands-Free system  
is locked. State the password to  
continue.”  
3. Say: [Beep] “XXXX” (Say the set  
password “PCode”.)  
4. If the correct password is input, voice  
guidance “XXXXXX... (Ex. “Mary's  
device”) (Device tag) is connected” is  
announced.  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to  
be effective.  
Password setting  
If the password is incorrect, voice  
guidance “XXXX (4-digit password,  
Pcode) incorrect password, please try  
again” is announced.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
Cancelling the password  
NOTE  
4. Say: [Beep] “Password”  
5. Prompt: “Password is disabled. Would  
you like to enable it?”  
6. Say: [Beep] “Yes”  
7. Prompt: “Please say a 4-digit  
password. Remember this password. It  
will be required to use this system.”  
8. Say: [Beep] “XXXX” (Say a desired  
4-digit password, “PCode”.)  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to  
be effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
9. Prompt:“Password XXXX (Password,  
PCode). Is this correct?”  
10.Say: [Beep] “Yes”  
11.Prompt:“Password is enabled.”  
4. Say: [Beep] “Password”  
5. Prompt:“Password is enabled. Would  
you like to disable it?”  
6. Say: [Beep] “Yes”  
7. Prompt:“Password is disabled.”  
5
–108  
Interior Features  
Bluetooth®  
C o n ¿rmation Prompts  
Voice Recognition Learning  
Function (Speaker Enrolment)  
(Type A/Type B)  
The con¿rmation prompt con¿rms the  
command content to the user before  
advancing to the operation requested by  
the user. When this function is turned  
on, the system reads out the voice  
input command previously received  
and con¿rms whether the command is  
correct before advancing to the command  
execution.  
When the con¿rmation prompt function is  
turned on:  
(Ex. “Calling John's device. Is this  
correct?”)  
The voice recognition learning function  
enables voice recognition appropriate to  
the characteristics of the user's voice. If the  
recognition of the voice input commands  
to the system is not adequate, this function  
can largely improve the system's voice  
recognition of the user. If your voice can  
be recognised suf¿ciently without using  
this function, you may not realize the  
added bene¿t of the function. To register  
your voice, the voice input command  
list must be read out. Read out the list  
when the vehicle is parked. Perform the  
registration in as quiet a place as possible  
(page 5-106). The registration must be  
performed completely. The required time  
is a few minutes. The user needs to be  
seated in the driver's seat with the voice  
input command list for voice recognition  
learning visible.  
When the con¿rmation prompt function is  
turned off:  
(Ex. “Calling John's device.”)  
NOTE  
If the con¿rmation prompt function is  
turned off when making an emergency  
call, the system reads out and con¿rms  
the command before executing it.  
When voice recognition learning is done  
for the ¿rst time  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Voice training”  
3. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hang-up button to cancel at  
any time.”  
3. Prompt: “Select one of the following:  
Pairing options, con¿rmation prompts,  
language, password, select phone or  
select music player.”  
4. Say: [Beep] “Con¿rmation prompts”  
5. Prompt: “Con¿rmation prompts  
are on/off. Would you like to turn  
con¿rmation prompts off/on?”  
6. Say: [Beep] “Yes”  
4. Press the talk button with a short press.  
5. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
7. Prompt: “Con¿rmation prompts are  
off/on.”  
5
–109  
Interior Features  
Bluetooth®  
6. Say: [Beep] “0123456789” (Say  
the voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
7. Prompt: “Speaker enrolment is  
complete.”  
9. Prompt: “Speaker enrolment is  
complete.”  
NOTE  
If an error occurred in the voice  
recognition learning, re-learning can be  
done by pressing the talk button with a  
short press.  
NOTE  
If an error occurred in the voice  
recognition learning, re-learning can be  
done by pressing the talk button with a  
short press.  
Voice input command list for voice  
recognition learning  
When reading out, the following points  
must be observed:  
Voice recognition re-learning  
ꢀ ꢀ  
Read out the numbers one at a time  
If voice recognition learning has already  
been done.  
correctly and naturally.  
(For example, “1234” must be read out  
“one, two, three, four” not “twelve,  
thirty four”.)  
Do not read out parentheses. “(” and  
ꢀ
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Voice training”  
3. Prompt: “Enrolment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
ꢀ ꢀ  
hyphens “-” are used for separating  
numbers in a phone number.  
4. Say: [Beep] “Retrain”  
E x .  
5. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hang-up button to cancel at  
any time.”  
6. Press the talk button with a short press.  
7. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
“(888) 555-1212” must be spoken “Eight,  
eight, eight, ¿ve, ¿ve, ¿ve, one, two, one,  
two.”  
Phrase  
Command  
1
2
3
4
5
6
7
8
0123456789  
(888) 555-1212  
Call  
Dial  
Setup  
Cancel  
Continue  
Help  
8. Say: [Beep] “0123456789” (Say  
the voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
5
–110  
Interior Features  
Bluetooth®  
Bluetooth® Preparation (Type C/  
Type D)  
NOTE  
ꢀ ꢀ  
The applicable phrase appears in the  
Device pairing  
audio display.  
ꢀ ꢀ  
After user voice registration is  
completed, voice guidance “Speaker  
enrolment is complete” is announced.  
To use Bluetooth® audio and Hands-Free,  
the device equipped with Bluetooth® has  
to be paired to the unit using the following  
procedure. A maximum of seven devices  
including Bluetooth® audio devices and  
hands-free mobile phones can be paired.  
Voice recognition learning on/off  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Voice training”  
3. Prompt: “Enrolment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
4. Say: [Beep] “Disable” or “Enable”  
5. When “Disable” is spoken, the voice  
recognition learning is turned off.  
When “Enable” is spoken, the voice  
recognition learning is turned on.  
6. Prompt: “Speaker Enrolment is  
disabled/enabled.”  
NOTE  
The Bluetooth® system may not operate  
for 1 or 2 minutes after the ignition  
is switched to ACC or ON. However,  
this does not indicate a problem. If the  
Bluetooth® system does not connect  
automatically after 1 or 2 minutes have  
elapsed, make sure that the Bluetooth®  
setting on the device is normal and  
attempt to reconnect the Bluetooth®  
device from the vehicle side.  
Pairing Procedure  
1. Select the  
icon on the home screen  
to display the Settings screen.  
2. Select the  
3. Select  
tab.  
.
4. Turn the Bluetooth® setting on.  
5. Select  
to display the  
message and switch to the device  
operation.  
6. Using your device, perform a search  
for the Bluetooth® device (Peripheral  
device).  
7. Select “Mazda” from the device list  
searched by the device.  
5
–111  
Interior Features  
Bluetooth®  
8. (Device with Bluetooth® version 2.0)  
Input the displayed 4-digit pairing code  
into the device.  
IMPORTANT note about pairing and  
automatic reconnection:  
ꢀ ꢀ  
If pairing is redone on the same  
(Device with Bluetooth® version 2.1  
or higher)  
mobile phone device, ¿rst clear  
“Mazda” displayed on the Bluetooth®  
setting screen of the mobile device.  
When the OS of the device is updated,  
Make sure the displayed 6-digit code  
on the audio is also displayed on the  
ꢀ ꢀ  
device, and touch the  
.
the pairing information may be deleted.  
If this happens, reprogramme the pairing  
information to the Bluetooth® unit.  
Connection permission and phonebook  
access permission for your mobile  
device may be required depending on  
the mobile device.  
ꢀ ꢀ  
Before you pair your device, make sure  
that Bluetooth® is “ON”, both on your  
phone and on the vehicle.  
9. If pairing is successful, the functions of  
the device connected to Bluetooth® are  
displayed.  
10.(Devices compatible with Mazda  
Email / SMS function)  
Device selection  
If several devices have been paired, the  
Bluetooth® unit links the device last  
SMS (Short Message Service)  
messages, and E-mail for the device are  
downloaded automatically. A download  
permission operation for your device  
may be required depending on the  
device.  
paired. If you would like to link a different  
paired device, it is necessary to change the  
link. The order of device priority after the  
link has been changed is maintained even  
when the ignition is switched off.  
NOTE  
Connecting other devices  
When Call history and messages  
are downloaded automatically, each  
automatic download setting must be on.  
Refer to Communication Settings on  
page 5-132.  
1. Select the  
icon on the home screen  
to display the Settings screen.  
2. Select the  
3. Select  
tab.  
.
4. Turn the Bluetooth® setting on.  
5. Select the name of the device you  
would like to connect.  
After a device is registered, the system  
automatically identi¿es the device. By  
activating Bluetooth® Hands-Free again, or  
by activating Bluetooth® Hands-Free ¿rst  
after switching the ignition from OFF to  
ACC, the device connection condition is  
indicated in the centre display.  
6.  
selection  
Connects both devices as hands-free  
and Bluetooth® audio.  
selection  
Connects as a hands-free device.  
selection  
Connects as Bluetooth® audio.  
5
–112  
Interior Features  
Bluetooth®  
Deleting all devices  
NOTE  
1. Select the  
icon on the home screen  
The following functions can be used for  
the Hands-free or audio.  
to display the Settings screen.  
2. Select the  
3. Select  
4. Select  
5. Select  
6. Select  
tab.  
ꢀ ꢀ  
Hands-free: Phone calls and E-mail/  
.
SMS  
Audio: Bluetooth® audio, Aha™,  
ꢀ ꢀ  
.
Stitcher™ radio  
.
.
Disconnecting a device  
Changing PIN code  
PIN code (4 digits) can be changed.  
1. Select the  
icon on the home screen  
to display the Settings screen.  
2. Select the  
3. Select  
tab.  
1. Select the  
icon on the home screen  
.
to display the Settings screen.  
4. Turn the Bluetooth® setting on.  
5. Select the device name which is  
currently connected.  
2. Select the  
3. Select  
4. Select  
5. Select  
tab.  
.
6. Select  
.
.
.
Deleting a device  
6. Input the new PIN code to be set.  
Selecting and deleting devices  
7. Select  
.
1. Select the  
icon on the home screen  
Available Language (Type C/Type  
D)*  
to display the Settings screen.  
2. Select the  
3. Select  
tab.  
The language can be changed.  
Refer to Settings on page 5-67.  
.
4. Turn the Bluetooth® setting on.  
5. Select the device name which you  
would like to delete.  
NOTE  
6. Select  
7. Select  
.
Depending on the language, it may only  
be available for the screen display, but  
not for the voice recognition.  
.
*Some models.  
5
–113  
Interior Features  
Bluetooth®  
To prevent a deterioration in the voice  
recognition rate and voice quality, the  
following points should be observed:  
Voice Recognition (Type C/Type D)  
In this section, the basic operation of the  
voice recognition is explained.  
ꢀ ꢀ  
The voice recognition cannot be  
Activating Voice Recognition  
Press the talk button.  
performed while voice guidance or  
the beep sound is operating. Wait  
until the voice guidance or the beep  
sound is ¿nished before saying your  
commands.  
Ending Voice Recognition  
Use one of the following methods:  
ꢀ ꢀ  
Phone related commands are available  
ꢀ ꢀ  
Press the hang-up button.  
Say, “Cancel”.  
Operate the commander switch or the  
centre display (only when vehicle is  
stopped).  
only when your phone is connected via  
Bluetooth®. Make sure your phone is  
connected via Bluetooth® before you  
operate phone related voice commands.  
ꢀ ꢀ  
ꢀ ꢀ  
ꢀ ꢀ  
Music play commands, such as Play  
Artist and Play Album can be used only  
in USB audio mode.  
Do not speak too slowly or loudly (no  
Skipping Voice Guidance (for faster  
operation)  
ꢀ ꢀ  
loud voice).  
Press and release the talk button.  
ꢀ ꢀ  
Speak clearly, without pausing between  
words or numbers.  
Dialects or different wording other  
than hands-free prompts cannot be  
recognised by voice recognition. Speak  
in the wording speci¿ed by the voice  
commands.  
Troubleshooting for Voice Recognition  
ꢀ ꢀ  
If you do not understand an operation  
method while in the voice recognition  
mode, say “Tutorial” or “Help”.  
Commands useable anytime during  
voice recognition  
ꢀ ꢀ  
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
“Go Back” and “Cancel” are commands  
which can be used at anytime during voice  
recognition.  
ꢀ ꢀ  
Close the windows to reduce loud  
Returning to previous operation  
noises from outside the vehicle, or turn  
down the airÀow of the air-conditioning  
system while Bluetooth® Hands-Free is  
being used.  
To return to the previous operation, say,  
“Go Back” while in voice recognition  
mode.  
ꢀ ꢀ  
Make sure the vents are not directing air  
up towards the microphone.  
Cancel  
To put the Bluetooth® Hands-Free system  
in standby mode, say, “Cancel” while in  
voice recognition mode.  
5
–114  
Interior Features  
Bluetooth®  
NOTE  
If the voice recognition performance is  
not satisfactory.  
Refer to Troubleshooting on page  
5-147.  
5
–115  
Interior Features  
Bluetooth®  
Audio Operation Using Voice Recognition (Type C/Type D)  
Main audio operation  
The below commands are examples of the available commands.  
When the talk button is pressed and the following command is spoken out, the audio can be  
operated. The commands in the () can be omitted. The speci¿ed name and number are put  
into the {}.  
Corresponding audio  
Voice command  
Function  
source  
(Go to/Play) AM (Radio)  
(Go to/Play) FM (Radio)  
(Go to/Play) DAB (Radio)  
Switches the audio source to AM radio.  
Switches the audio source to FM radio.  
Switches the audio source to DAB radio.  
All  
All  
All  
(Go to/Play) Bluetooth (Audio) Switches the audio source to BT audio.  
All  
(Go to/Play) Aha (Radio)  
(Go to/Play) Stitcher  
Switches the audio source to Aha™ Radio.  
Switches the audio source to Stitcher™ Radio.  
Switches the audio source to USB 1.  
Switches the audio source to USB 2.  
Plays the selected playlist.  
All  
All  
(Go to/Play) USB 1  
All  
(Go to/Play) USB 2  
All  
Play Playlist {Playlist name}  
Play Artist {Artist name}  
Play Album {Album name}  
Play Genre {Genre name}  
Play Folder {Folder name}  
USB  
USB  
USB  
USB  
USB  
Plays the selected artist.  
Plays the selected album.  
Plays the selected genre.  
Plays the selected folder.  
NOTE  
ꢀ ꢀ  
Some commands cannot be used depending on devices and use conditions.  
If the Bluetooth® device, USB, or AUX is not connected, the related commands cannot  
be used.  
ꢀ ꢀ  
5
–116  
Interior Features  
Bluetooth®  
Bluetooth® Hands-Free  
(Type A/Type B)*  
Phonebook registration  
Phone numbers can be registered to the  
Bluetooth® Hands-Free phonebook.  
Making a Call  
NOTE  
Phonebook Usage  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to  
be effective.  
Telephone calls can be made by saying  
the name of a person (voice tag) whose  
phone number has been registered in  
Bluetooth® Hands-Free in advance. Refer  
to Phonebook registration.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “New entry”  
5. Prompt: “Name please.”  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
7. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Registered voice tag).  
Is this correct?”  
8. Say: [Beep] “Yes”  
9. Prompt: “Home, Work, Mobile, or  
Other?”  
10.Say: [Beep] “Mobile” (Say “Home” ,  
“Work”, “Mobile”, or “Other”, for the  
desired location to be registered.)  
11.Prompt: “Mobile (Location to be  
registered). Is this correct?”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Call”  
3. Prompt: “Name please.”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phonebook.)  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phonebook).  
6. Say: [Beep] “Yes”  
7. Prompt: “Dialing”  
NOTE  
The “Call” command and the voice tag  
can be combined.  
Ex. In Step 2, say, “Call John's phone”,  
then, Steps 3 and 4 can be skipped.  
12.Say: [Beep] “Yes”  
13.Prompt: “Number, please.”  
14.Say: [Beep] “XXXXXXXXXXX”  
(Say the phone number to be  
registered.)  
15.Prompt: “XXXXXXXXXXX (Phone  
number registration). After the beep,  
continue to add numbers, or say  
Go-Back to re-enter the last entered  
numbers, or press the Pick-Up button to  
save the number.”  
*Some models.  
5
–117  
Interior Features  
Bluetooth®  
16.(Registration)  
5. Prompt: “The hands free system is  
ready to receive a contact from the  
phone; only a home, work, mobile  
number can be imported into the  
hands free system. The import contact  
process requires the user to operate the  
phone. Refer to the phone's manual  
for information on how to operate  
the phone to perform the import  
operation.”  
6. Prompt: “X (Number of locations  
which include data) numbers have been  
imported. What name would you like to  
use for these numbers?”  
7. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
Press the pick-up button or say “Enter”,  
then go to Step 17.  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 15.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 13.  
17.Prompt: “Number saved. Would you  
like to add another number for this  
entry?”  
18.Say: [Beep] “Yes” or “No”.  
19.If “Yes”, an additional phone number  
registration can be made for the same  
entry.  
8. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Voice tag). Is this  
correct?”  
If “No”, the system returns to standby  
status.  
9. Say: [Beep] “Yes”  
10.Prompt: “Number saved. Would you  
like to import another contact?”  
11.Say: [Beep] “Yes” or “No”  
12.If “Yes”, the procedure proceeds to  
Step 5.  
(Import contact)  
Phonebook data from your device (Mobile  
phone) can be sent and registered to your  
Bluetooth® Hands-Free phonebook using  
Bluetooth®.  
If “No”, the system returns to standby  
status.  
1. Press the pick-up button or talk button  
with a short press.  
Editing phonebook  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
The data registered to the Bluetooth®  
Hands-Free phonebook can be edited.  
NOTE  
4. Say: [Beep] “Import contact”  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to  
be effective.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
5
–118  
Interior Features  
Bluetooth®  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “Edit”  
5. Prompt: “Please say the name of the  
entry you would like to edit or say,  
“List names”.”  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say the voice tag for the  
registered name to be edited in the  
phonebook.)  
7. Prompt: “Home, Work, Mobile, or  
Other?”  
14.(Number Change)  
Press the pick-up button, then go to  
Step 15.  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 13.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed. Number, please.”.  
Then go back to Step 12.  
15.Prompt: “Number changed.”  
8. Say: [Beep] “Home” (Say the  
registered location to be edited:  
“Home”, “Work”, “Mobile”, or  
“Other”.)  
9. Prompt: “XXXXX... (Ex. “Mary's  
phone”) (Registered voice tag) XXXX  
(Ex. “Home”) (Registered location). Is  
this correct?”  
Phonebook data deletion  
(Erasing individual phonebook data)  
Individual data registered to the  
Bluetooth® Hands-Free phonebook can be  
cleared.  
10.Say: [Beep] “Yes”  
NOTE  
11.Prompt: “The current number is  
XXXXXXXXXXX (Ex. “555-1234”)  
(Currently registered number). New  
number, please.”  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to  
be effective.  
NOTE  
If there was no previous phone number  
registered to a location (Ex. “Work”),  
the prompt will only read out “Number,  
please”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
12.Say: [Beep] “XXXXXXXXXXX (Ex.  
“555-5678”)” (Say the new phone  
number to be registered.)  
13.Prompt: “XXXXXXXX (Telephone  
number) After the beep, continue to add  
numbers, or say Go-Back to re-enter  
the last entered numbers, or press the  
Pick-Up button to save the number.”  
4. Say: [Beep] “Delete”  
5. Prompt: “Please say the name of the  
entry you would like to delete or say,  
“List names”. ”  
6. Say: [Beep] “XXXXX... (Ex. “John's  
phone”) ” (Say the registered voice tag  
to be deleted from the phonebook.)  
5
–119  
Interior Features  
Bluetooth®  
7. Prompt: “Deleting XXXXX... (Ex.  
“John's phone”) (Registered voice tag)  
Home (Registered location). Is this  
correct?”  
Read-out of names registered to the  
Bluetooth® Hands-Free phonebook  
Bluetooth® Hands-Free can read out the  
list of names registered to its phonebook.  
8. Say: [Beep] “Yes”  
9. Prompt: “XXXXX... (Ex. “John's  
phone”) (Registered voice tag) Home  
(Registered location) deleted.”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
(Complete deletion of the phonebook  
data)  
All data registered to the Bluetooth®  
Hands-Free phonebook can be erased.  
4. Say: [Beep] “List names”  
5. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. “John's phone”, Mary's  
phone, Bill's phone)” (Voice guidance  
reads out the voice tags registered to  
the phonebook.)  
NOTE  
Do this function only when parked. It is  
too distracting to attempt while driving  
and you may make too many errors to  
be effective.  
Press the talk button with a short press  
during the read-out at the desired name,  
and then say one of the following voice  
commands to execute it.  
ꢀ
 
ꢀ
“Continue”: Continues the list readout.  
“Call”: Calls the registered phonebook  
data when the talk button is short-  
pressed.  
“Edit”: Edits the registered phonebook  
data when the talk button is short-  
pressed.  
“Delete”: Deletes the registered  
phonebook data when the talk button is  
short-pressed.  
1. Press the pick-up button or talk button  
with a short press.  
ꢀ ꢀ  
 
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “Erase all”  
ꢀ
 
ꢀ
ꢀ
ꢀ
ꢀ
 
5. Prompt: “Are you sure you want to  
delete everything from your Hands  
Free system phonebook?”  
ꢀ
 
“Previous”: Returns to the previous  
phonebook data in read-out when the  
talk button is short-pressed.  
6. Say: [Beep] “Yes”  
7. Prompt: “You are about to delete  
everything from your Hands Free  
system phonebook. Do you want to  
continue?”  
6. Prompt: “End of list, would you like to  
start from the beginning?”  
7. Say: [Beep] “No”  
8. Say: [Beep] “Yes”  
9. Prompt: “Please wait, deleting the  
Hands Free system phonebook.”  
10.Prompt: “Hands-Free system  
phonebook deleted.”  
5
–120  
Interior Features  
Bluetooth®  
Redial Function  
6. (Dialing)  
Press the pick-up button or say “Dial”,  
then go to Step 7.  
(Adding/inputting telephone  
number)  
Redialing the number of the person  
previously dialed using the phone is  
possible.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Redial”  
3. Prompt: “Dialing”  
Say, “XXXX” (desired telephone  
number), then go to Step 5.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 3.  
Telephone Number Input  
NOTE  
7. Prompt: “Dialing”  
Practice this while parked until you are  
con¿dent you can do it while driving in  
a non-taxing road situation. If you are  
not completely comfortable, make all  
calls from a safe parking position, and  
only start driving when you can devote  
your full attention to driving.  
NOTE  
The “Dial” command and a telephone  
number can be combined.  
Ex. In Step 2, say, “Dial 123-4567”  
then, Steps 3 and 4 can be skipped.  
Emergency calls  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Dial”  
A call can be made to the emergency  
phone number (112) using the voice input  
command.  
3. Prompt: “Number, please”  
4. Say: [Beep] “XXXXXXXXXXX  
(Telephone number)”  
5. Prompt: “XXXXXXXXXXX.  
(Telephone number) After the beep,  
continue to add numbers, or say  
Go-Back to re-enter the last entered  
numbers, or press the Pick-Up button to  
execute dialing.”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Emergency”  
3. Prompt: “Dialing “112”, is this  
correct?”  
4. Say: [Beep] “Yes”  
5. Prompt: “Dialing”  
Receiving an Incoming Call  
1 . Prompt: “Incoming call, press the  
pick-up button to answer”  
2. To accept the call, press the pick-up  
button.  
To reject the call, press the hang-up  
button.  
5
–121  
Interior Features  
Bluetooth®  
Hanging Up a Call  
Call interrupt  
Press the hang-up button during the call. A  
beep sound will con¿rm that call is ended.  
A call can be interrupted to receive an  
incoming call from a third party.  
Switch to a new incoming call using the  
following methods.  
Mute  
The microphone can be muted during a  
call.  
Method 1  
1. Press the pick-up button.  
2. Prompt: “Swapping calls.”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Mute”  
3. Prompt:“Microphone muted”  
Method 2  
Cancelling mute  
1. Press the talk button with a short press.  
2. Say: [Beep] “Swap calls”  
3. Prompt: “Swapping calls.”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Mute off”  
3. Prompt:“Microphone unmuted”  
NOTE  
Transferring a Call from Hands-  
Free to a Device (Mobile Phone)  
ꢀ ꢀ  
To refuse an incoming call, press the  
hang-up button.  
After receiving a new incoming call,  
the previous call is placed on hold.  
Communication between the hands-free  
unit and a device (Mobile phone) is  
cancelled, and the line can be switched  
to a standard call using a device (Mobile  
phone).  
ꢀ ꢀ  
Switching calls  
1. Press the talk button with a short press.  
2. Say: [Beep] “Transfer call”  
3. Prompt:“Transferred call to phone”  
Switching back to the previous call can  
also be done.  
Method 1  
Transferring a Call from a Device  
(Mobile Phone) to Hands-Free  
1. Press the pick-up button.  
2. Prompt: “Swapping calls.”  
Communication between devices (Mobile  
phone) can be switched to Bluetooth®  
Hands-Free.  
Method 2  
1. Press the talk button with a short press.  
2. Say: [Beep] “Swap calls”  
3. Prompt: “Swapping calls.”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Transfer call”  
3. Prompt:“Transferred call to Hands  
Free system”  
Three-way call function  
1. Press the talk button with a short press.  
2. Say: [Beep] “Join calls”  
3. Prompt: “Joining calls”  
5
–122  
Interior Features  
Bluetooth®  
Making a call using a telephone number  
Redialing function  
1. Press the talk button with a short press.  
2. Say: [Beep] “Dial”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Redial”  
3. Prompt: “Number, please”  
4. Say: [Beep] “XXXXXXXXXXX  
(Telephone number)”  
3. Prompt: “Dialing”  
Ending the current call  
5. Prompt: “XXXXXXXXXXX.  
(Telephone number) After the beep,  
continue to add numbers, or say  
Go-Back to re-enter the last entered  
numbers, or press the Pick-Up button to  
execute dialing.”  
Press the hang-up button during the call.  
DTMF (Dual Tone Multi-  
Frequency Signal) Transmission  
This function is used when transmitting  
DTMF via the user's voice. The receiver  
of a DTMF transmission is generally a  
home telephone answering machine or  
a company's automated guidance call  
centre (When you send tone signals  
back according to the voice guidance  
recording).  
6. (Dialing)  
Press the pick-up button or say “Dial”,  
then go to Step 7.  
(Adding/inputting telephone  
number)  
Say, “XXXX” (desired telephone  
number), then go to Step 5.  
(Telephone number correction)  
Say, “Go Back”. The prompt replies,  
“Go Back. The last entered numbers  
have been removed.”. Then go back to  
Step 3.  
1. Press the talk button with a short press.  
2. Say: [Beep] “XXXX... send” (Say  
DTMF code)  
3. Prompt:“Sending XXXX... (DTMF  
code)”  
7. Prompt: “Dialing”  
Making calls using the phonebook  
1. Press the talk button with a short press.  
2. Say: [Beep] “Call”  
3. Prompt: “Name please.”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phonebook.)  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phonebook).  
6. Say: [Beep] “Yes”  
7. Prompt: “Dialing”  
5
–123  
Interior Features  
Bluetooth®  
Bluetooth® Hands-Free  
(Type C/Type D)*  
(Automatic downloading)  
The “Auto Download Contacts”  
setting must be on. When hands-free is  
connected to the device, the phonebook is  
downloaded automatically.  
Making a Call  
Refer to Communication Settings on page  
5-132.  
Phonebook Usage  
Telephone calls can be made by saying  
the contact name in the downloaded  
phonebook or the name of a person whose  
phone number has been registered in the  
Bluetooth® Hands-Free. Refer to Import  
contact (Download Phonebook).  
(Manually downloading)  
If the “Auto Download Contacts” setting  
is off, download the phonebook using the  
following procedure.  
1. Select the  
icon on the home screen  
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say: “Call XXXXX... (Ex. “John”)  
Mobile”.  
4. Follow the voice guidance to place the  
call.  
to display the Communication screen.  
2. Select  
to display the contact  
list.  
3. Select  
4. Select  
.
or  
Screen operation  
to switch to the  
device operation.  
1. Select the  
icon on the home screen  
to display the Communication screen.  
5. If  
is selected, select  
.
2. Select to display the contact  
6. Download will be started from the  
mobile phone.  
list.  
3. Select the contact you would like  
to call to display the details for the  
contact.  
NOTE  
4. Select the desired phone number to  
make the call.  
ꢀ ꢀ  
If “Import All Contacts” is performed  
after saving the phonebook to the  
Bluetooth® unit, the phonebook will  
be overwritten.  
A maximum of 1000 contacts can be  
registered to the phonebook.  
Import contact (Download Phonebook)  
Phonebook data from your device (Mobile  
phone) can be sent and registered to your  
Bluetooth® Hands-Free phonebook using  
Bluetooth®.  
ꢀ ꢀ  
ꢀ ꢀ  
Phonebook, incoming/outgoing call  
record, and favourite memories are  
exclusive to each mobile phone to  
protect privacy.  
*Some models.  
5
–124  
Interior Features  
Bluetooth®  
Favourites Contacts  
3. (Only one phone number is  
registered to contact)  
A maximum of 50 contacts can be  
Select the contact information you  
would like to call. Go to Step 5.  
(Multiple phone numbers are  
registered to contact)  
registered. It will take less time to make a  
call after registering the telephone number.  
In addition, you do not have to look for the  
person you want to call in the phonebook.  
Select the contact you would like to  
call to display the screen indicating the  
details for the contact. Go to Step 4.  
4. Select the phone number you would  
like to call.  
Registering to your favourites  
1. Select the  
icon on the home screen  
to display the Communication screen.  
5. Select  
.
2. Select  
favourites list.  
to display the  
Deleting from your favourites  
3. Select  
4. Select  
.
1. Select the  
icon on the home screen  
or  
.
to display the Communication screen.  
5. Select from the displayed list.  
2. Select  
favourites list.  
to display the  
NOTE  
3. Select  
4. Select  
.
.
When “Add New Contact” is selected,  
information such as the selected person’s  
name is also registered. In addition,  
when “Add New Contact Details” is  
selected, only the telephone number of  
the selected person is registered.  
5. Select the contact information which  
you would like to delete.  
6. Select  
.
Changing the display order of your  
favourites list  
Making a call from your favourites  
1. Select the  
icon on the home screen  
to display the Communication screen.  
1. Select the  
icon on the home screen  
to display the Communication screen.  
2. Select  
to display the  
favourites list.  
3. Select  
4. Select  
2. Select to display the  
favourites list.  
.
.
5. The contact can be moved after it is  
selected.  
6. Slide the contact or move it using the  
commander switch, then select  
.
5
–125  
Interior Features  
Bluetooth®  
Changing contact name of your  
favourites  
3. Input the telephone number using the  
dial pad.  
4. Select to make the call.  
1. Select the  
icon on the home screen  
to display the Communication screen.  
Numeral or symbol entry  
2. Select  
favourites list.  
to display the  
Use the dial pad.  
Long-press the  
to input +.  
3. Select  
4. Select  
5. Select the contact to display the  
keyboard screen.  
.
Select  
value.  
to delete the currently input  
.
Long-press  
to delete all input values.  
6. If a new name is input and  
is  
Redial Function  
selected, the contact name is stored.  
Makes a call to the last person called  
(latest person on outgoing call record)  
from the mobile phone/vehicle.  
NOTE  
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say: “Redial”  
If the contact is long-pressed when the  
favourites list is displayed, the contact  
information can be edited (deleted,  
moved).  
Call back Function  
Makes a call to the last person who called  
your (latest person on incoming call  
record) mobile phone/vehicle.  
Telephone Number Input  
NOTE  
1. Press the talk button.  
2. Wait for the beep sound.  
3. Say: “Call back”  
Practice this while parked until you are  
con¿dent you can do it while driving in  
a non-taxing road situation. If you are  
not completely comfortable, make all  
calls from a safe parking position, and  
only start driving when you can devote  
your full attention to driving.  
1. Select the  
icon on the home screen  
to display the Communication screen.  
2. When is pressed, the dial pad  
is displayed.  
5
–126  
Interior Features  
Bluetooth®  
Receiving an Incoming Call  
When an incoming call is received, the incoming call noti¿cation screen is displayed. The  
“Incoming Call Noti¿cations” setting must be on.  
Refer to Communication Settings on page 5-132.  
To accept the call, press the pick-up button on the audio control switch or select  
the screen.  
on  
To reject the call, press the hang-up button on the audio control switch or select  
screen.  
on the  
The following icons are displayed on the screen during a call. Icons which can be used differ  
depending on use conditions.  
Icon  
Function  
Displays the Communication menu.  
Ends the call.  
Transferring a call from hands-free to a mobile phone  
Communication between the Bluetooth® unit and a device (mobile phone) is cancelled, and  
an incoming call will be received by the device (mobile phone) like a standard call.  
Transferring a call from a device (mobile phone) to hands-free  
Communication between devices (mobile phone) can be switched to Bluetooth® Hands-  
Free.  
Mute  
The microphone can be muted during a call.  
When selected again, the mute is cancelled.  
A call is made to other person during a call and a 3-way call can be made. Select the contact  
from the following to make a call.  
: Call History is displayed.  
: The phonebook is displayed.  
: The dial pad is displayed. Input the phone number.  
The device may be unusable depending on the contractual content.  
The call on hold is made to make a 3-way call.  
The device may be unusable depending on the contractual content.  
Switches the call on hold.  
DTMF (Dual Tone Multi-Frequency Signal) Transmission  
This function is used when transmitting DTMF via the dial pad. The receiver of a DTMF  
transmission is generally a home telephone answering machine or a company's automated  
guidance call centre.  
Input the number using a dial pad.  
5
–127  
Interior Features  
Bluetooth®  
Receiving and Replying to  
Messages (available only with  
E-mail/SMS compatible phones)  
NOTE  
ꢀ ꢀ  
If the ignition is switched off  
during a hands-free call, the line is  
transferred to the device (Mobile  
phone) automatically.  
If the DTMF code has two or more  
digits or symbols, each one must be  
transmitted individually.  
SMS (Short Message Service) messages,  
and E-mail received by connected devices  
can be downloaded, displayed, and played  
(read by the system).  
Additionally, replies can also be made  
to calls and messages in the received  
messages.  
ꢀ ꢀ  
Downloading messages  
Call Interrupt  
Up to 20 new messages can be  
downloaded and displayed from a  
connected device.  
A call can be interrupted to receive an  
incoming call from a third party.  
When  
is selected or the pick-  
NOTE  
up button on the steering wheel is pressed,  
the current call is held and the system  
switches to the new incoming call.  
For E-mail, 20 messages for each  
account can be downloaded.  
When  
is selected, the current  
call is ended and the system switches to  
the new incoming call (GSM network  
only).  
(Automatic downloading)  
The “Auto Download Email” (E-mail) or  
“Auto Download SMS” (SMS) setting  
must be on. A message is downloaded  
automatically when the Bluetooth® unit is  
connected to the device.  
When  
is selected or the hang-up  
button on the steering wheel is pressed, an  
incoming call is refused.  
NOTE  
Refer to Communication Settings on page  
5-132.  
ꢀ ꢀ  
The function may not be available  
depending on the contractual content  
of the mobile device.  
The function may not be operable  
depending on the type of the  
telephone network and the mobile  
device.  
(Manually downloading)  
ꢀ ꢀ  
When the “Auto Download Email”  
(E-mail) or “Auto Download SMS” (SMS)  
setting is off, the message is downloaded  
using the following procedure.  
1. Select the  
icon on the home screen  
to display the Communication screen.  
2. Select  
Inbox.  
or  
to display the  
3. Select  
.
5
–128  
Interior Features  
Bluetooth®  
4. Download will be started from the  
mobile phone.  
NOTE  
ꢀ ꢀ  
Attached data is not downloaded.  
Messages up to 1 kilobyte  
ꢀ ꢀ  
(E-mail)/140-bytes (SMS) can be  
downloaded.  
A message list is created for each  
ꢀ ꢀ  
device.  
ꢀ ꢀ  
If the connected device does not  
correspond to MAP 1.0, the AT  
command is used to download. The  
downloaded message indicates that it  
is already read.  
ꢀ ꢀ  
Downloading using the AT command  
may not function depending on the  
connected device.  
Receiving messages  
( M e t h o d 1 )  
When a device receives a message, a  
message received noti¿cation is displayed.  
The “Email Noti¿cations” (E-mail) or  
“SMS Noti¿cations” (SMS) setting must  
be on.  
Refer to Communication Settings on page  
5-132.  
Select  
and display the message.  
(Method 2)  
1. Select the  
icon on the home screen  
to display the Communication screen.  
2. Select  
and display the new  
message list for E-mail and SMS.  
3. Select the message you would like to  
display.  
5
–129  
Interior Features  
Bluetooth®  
The following icons are displayed in the lower part of the details on the message. Icons  
which can be used differ depending on use conditions.  
Icon  
Function  
Displays the Communication menu.  
Displays the inbox.  
Plays back a message.  
When selected again, playback is temporarily stopped.  
Displays the previous message.  
Displays the next message.  
Only replies to the sender of the currently displayed message.  
Select the sentence on the displayed reply screen and select the sentence for sending from  
the preset message.  
Select  
.
(Only E-mail)  
Replies to all members including CC.  
Select the sentence on the displayed reply screen and select the sentence for sending from  
the preset message.  
Select  
.
Makes a call to a person who sent a message.  
For E-mail, this function may not work depending on the device.  
Deletes a message.  
The messages stored in a device is also deleted.  
NOTE  
Up to three preset messages can be selected.  
5
–130  
Interior Features  
Bluetooth®  
Example of use (verify unread E-mail)  
Editing preset messages  
1. Select the  
icon on the home screen  
1. Select the  
icon on the home screen  
to display the Communication screen.  
to display the Communication screen.  
2. Select  
to display the inbox.  
2. Select  
3. Select  
.
.
4. Select the preset message which you  
would like to edit. The keyboard screen  
is displayed.  
5. When the message is input and is  
selected, the message is stored as a  
preset message.  
NOTE  
3. Select the unread message displayed in  
bold.  
ꢀ ꢀ  
Select the  
language.  
icon to change the  
4. The details of the message are  
displayed and replying to the message,  
making a call, or playback can be  
performed.  
ꢀ ꢀ  
ꢀ ꢀ  
Select the icon to switch between  
capitalized and lower-case  
characters.  
Changing account for displaying  
(E-mail only)  
Select the  
icon to return to the  
previous screen without storing the  
edit.  
1. Select  
.
2. Select the account which you would  
like to display. Only the messages for  
the selected account are displayed in  
the inbox.  
5
–131  
Interior Features  
Bluetooth®  
Communication Settings  
Select the  
Select  
icon on the home screen to display the Communication screen.  
to change the setting.  
Item  
Setting  
Function  
Go to Bluetooth® setting menu.  
Bluetooth®  
—
Refer to Bluetooth® Preparation (Type C/Type D) on page 5-111.  
Incoming Call  
Noti¿cations  
On/Off  
Noti¿es when an incoming call is received.  
Downloads SMS automatically when the Bluetooth® unit is connected  
to the device.  
Auto Download SMS  
On/Off  
On/Off  
On/Off  
On/Off  
On/Off  
SMS Noti¿cations  
Noti¿es when a new SMS is received.  
Downloads E-mail automatically when the Bluetooth® unit is connected  
to the device.  
Auto Download  
Email*1  
Email Noti¿cations  
Noti¿es when a new Email is received.  
Downloads Call History automatically when the Bluetooth® unit is  
connected to the device.  
Auto Download Call  
History  
Auto Download  
Contacts*1  
Downloads the phonebook automatically when the Bluetooth® unit is  
connected to the device.  
On/Off  
Fixed/In-band/  
Off  
Ringtone  
Changes the ringtone setting.  
Adjusts using  
the slider.  
Phone Volume  
VR and Ringtone  
Adjusts the conversation volume.  
Adjusts using  
the slider.  
Adjusts the voice guidance and ringtone volume.  
Displays the contact information in alphabetical order of the ¿rst name.  
Displays the contact information in alphabetical order of the last name.  
First Name,  
Last Name  
Contacts Sort Order  
Last Name,  
First Name  
Edits the preset message.  
Refer to Receiving and Replying to Messages (available only with  
E-mail/SMS compatible phones) on page 5-128.  
Preset Messages  
Reset  
—
—
Initializes all Communication Settings.  
*1 Depending on the device, it may be necessary to acquire download permission on the device side.  
5
–132  
Interior Features  
Bluetooth®  
Bluetooth® Audio (Type  
A/Type B)*  
NOTE  
ꢀ ꢀ  
The battery consumption of  
Bluetooth® audio devices increases  
while Bluetooth® is connected.  
If a general mobile phone device  
is USB connected during music  
playback over the Bluetooth®  
connection, the Bluetooth®  
Applicable Bluetooth® speci¿cation  
(Recommended)  
ꢀ ꢀ  
Ver. 2.0  
Response pro¿le  
ꢀ ꢀ  
A2DP (Advanced Audio Distribution  
connection is disconnected. For  
this reason, you cannot have  
music playback over a Bluetooth®  
connection and music playback using  
a USB connection at the same time.  
The system may not operate  
normally depending on the  
Pro¿le) Ver. 1.0/1.2  
AVRCP (Audio/Video Remote Control  
ꢀ ꢀ  
Pro¿le) Ver. 1.0/1.3  
ꢀ ꢀ  
A2DP is a pro¿le which transmits only  
audio to the Bluetooth® unit. If your  
Bluetooth® audio device corresponds  
only to A2DP, but not AVRCP, you  
cannot operate it using the control panel  
of the vehicle's audio system. In this  
case, only the operations on the mobile  
device are available the same as when a  
portable audio device for a non-compliant  
Bluetooth® device is connected to the  
AUX terminal.  
Bluetooth® audio device.  
How to Use the Bluetooth® Audio  
System  
Switching to Bluetooth® audio mode  
To listen to music or voice audio recorded  
to a Bluetooth® audio device, switch to  
the Bluetooth® audio mode to operate  
the audio device using the audio system  
control panel. Any Bluetooth® audio  
device must be paired to the vehicle's  
Bluetooth® unit before it can be used.  
Refer to Bluetooth® Preparation (Type A/  
Type B) on page 5-94.  
AVRCP  
Function  
Playback  
A2DP  
Ver. 1.0 Ver. 1.3  
—
—
—
—
—
—
X
X
X
X
X
X
X
X
Pause  
File (Track) up/down  
Reverse  
X
—
—
—
Fast-forward  
Text display  
1. Turn on the Bluetooth® audio device's  
power.  
2. Switch the ignition to ACC or ON.  
X: Available  
—: Not available  
Make sure that the “ ” symbol is  
displayed in the audio display. The  
symbol is not displayed if an un-paired  
Bluetooth® audio device is being used  
or the vehicle's Bluetooth® unit has a  
malfunction.  
*Some models.  
5
–133  
Interior Features  
Bluetooth®  
Selecting a ¿le (track)  
NOTE  
Some Bluetooth® audio devices need a  
Selects the next ¿le (track)  
certain amount of time before the “ ”  
symbol is displayed.  
Short-press the track up button (  
).  
Selects the beginning of the current ¿le  
(track)  
3. Press the media button (  
) to  
switch to the Bluetooth® audio mode  
and start playback.  
Short-press the track down button (  
).  
Fast-forward/Reverse (AVRCP Ver. 1.3)  
If the current device version is lower  
than AVRCP Ver. 1.3: “BT Audio” is  
displayed.  
Fast-forward  
If the current device is AVRCP Ver. 1.3:  
The playback time is displayed.  
Press and hold the fast-forward button  
(
).  
Reverse  
NOTE  
Press and hold the reverse down button  
If the Bluetooth® audio device does  
not begin playback, press the Play/  
Pause button (4).  
ꢀ ꢀ  
(
).  
Switching the display (only AVRCP Ver.  
1.3)  
ꢀ ꢀ  
If a call is received on a hands-free  
mobile phone during playback from  
the Bluetooth® audio device, the  
playback is stopped. Playback from  
the Bluetooth® audio device resumes  
after the call ends.  
The information displayed on the audio  
display changes as follows each time the  
text button (3) is pressed during playback.  
Information displayed  
Button  
on audio display  
Playback  
Elapsed time  
Album name  
Song name  
Artist name  
1. To listen to a Bluetooth® audio device  
over the vehicle's speaker system,  
switch the mode to Bluetooth®  
audio mode. (Refer to “Switching to  
Bluetooth® audio mode”)  
2. To stop playback, press the Play/Pause  
button (4).  
3. Press the button again to resume  
playback.  
5
–134  
Interior Features  
Bluetooth®  
Bluetooth® Audio Device  
NOTE  
Information Display  
ꢀ ꢀ  
If title information is not available,  
If a Bluetooth® audio device is connected,  
the following information is displayed in  
the audio display.  
“NO TITLE” is displayed.  
ꢀ ꢀ  
This unit cannot display some  
characters. Characters which cannot  
be displayed are indicated by an  
AVRCP Ver.  
lower than 1.3 Ver. 1.3  
AVRCP  
asterisk ( ).  
Device name  
Title  
X
X
X
X
X
X
X
—
—
—
—
—
—
—
Display scroll  
Artist name  
Album name  
File number  
Playback time  
Folder number  
Only 13 characters can be displayed at one  
time. To display the rest of the characters  
of a long title, press and hold the text  
button (3). The display scrolls the next 13  
characters. Press and hold the text button  
(3) again after the last 13 characters have  
been displayed to return to the beginning  
of the title.  
X: Available  
—: Not available  
NOTE  
Some information may not display  
depending on the device, and if the  
information cannot be displayed, “NO  
TITLE” is indicated.  
5
–135  
Interior Features  
Bluetooth®  
Bluetooth® Audio (Type  
C/Type D)*  
AVRCP  
Function  
A2DP  
Ver. 1.0 Ver. 1.3 Ver. 1.4  
Playback  
Pause  
X
X
X
X
X
X
X
X
Applicable Bluetooth® speci¿cation  
(Recommended)  
File (Track)  
up/down  
—
X
X
X
Ver. 1.1/1.2/2.0 EDR/2.1 EDR/3.0  
(conformity)  
Response pro¿le  
Reverse  
—
—
—
—
—
—
X
X
X
X
X
X
Fast-forward  
Text display  
ꢀ ꢀ  
A2DP (Advanced Audio Distribution  
Depends Depends  
on  
device  
Pro¿le) Ver. 1.0/1.2  
AVRCP (Audio/Video Remote Control  
Repeat  
ShufÀe  
Scan  
—
—
—
—
—
—
—
—
on  
device  
ꢀ ꢀ  
Pro¿le) Ver. 1.0/1.3/1.4  
Depends Depends  
on  
device  
on  
device  
A2DP is a pro¿le which transmits only  
audio to the Bluetooth® unit. If your  
Bluetooth® audio device corresponds  
only to A2DP, but not AVRCP, you  
cannot operate it using the control panel  
of the vehicle's audio system. In this  
case, only the operations on the mobile  
device are available the same as when a  
portable audio device for a non-compliant  
Bluetooth® device is connected to the  
AUX terminal.  
Depends Depends  
on  
device  
on  
device  
Depends  
on  
device  
Folder up/  
down  
—
X: Available  
—: Not available  
NOTE  
ꢀ ꢀ  
The battery consumption of  
Bluetooth® audio devices increases  
while Bluetooth® is connected.  
If a general mobile phone device  
is USB connected during music  
playback over the Bluetooth®  
connection, the Bluetooth®  
ꢀ ꢀ  
connection is disconnected. For  
this reason, you cannot have  
music playback over a Bluetooth®  
connection and music playback using  
a USB connection at the same time.  
The system may not operate  
normally depending on the  
ꢀ ꢀ  
Bluetooth® audio device.  
*Some models.  
5
–136  
Interior Features  
Bluetooth®  
How to Use the Bluetooth® Audio System  
Switching to Bluetooth® audio mode  
To listen to music or voice audio recorded to a Bluetooth® audio device, switch to the  
Bluetooth® audio mode to operate the audio device using the audio system control panel.  
Any Bluetooth® audio device must be paired to the vehicle's Bluetooth® unit before it can be  
used.  
Refer to Bluetooth® Preparation (Type C/Type D) on page 5-111.  
1. Turn on the Bluetooth® audio device's power.  
2. Switch the ignition to ACC or ON.  
3. Select the  
4. When  
icon on the home screen to display the Entertainment screen.  
is selected, switches to the Bluetooth® audio mode to begin playback.  
NOTE  
If Bluetooth® audio is used after using Aha™ or Stitcher™ radio, the application on  
ꢀ ꢀ  
the mobile device has to be closed ¿rst.  
If the Bluetooth® audio device does not begin playback, select the  
icon.  
ꢀ ꢀ  
ꢀ ꢀ  
If the mode is switched from Bluetooth® audio mode to another mode (radio mode),  
audio playback from the Bluetooth® audio device stops.  
Playback  
To listen to a Bluetooth® audio device over the vehicle's speaker system, switch the mode to  
Bluetooth® audio mode. (Refer to “Switching to Bluetooth® audio mode”)  
After switching to the Bluetooth® audio mode, the following icons are displayed in the  
lower part of the display. Icons which can be used differ depending on the version of the  
Bluetooth® audio device which you are currently using.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
(AVRCP Ver. 1.4 only)  
Displays the top level folder/¿le list.  
Select the folder which you want to select.  
The ¿les in the selected folder are displayed.  
Select the ¿le you want to play.  
5
–137  
Interior Features  
Bluetooth®  
Icon  
Function  
(AVRCP Ver. 1.3 or higher)  
Replays the song currently being played repeatedly.  
When selected again, the songs in the folder are played repeatedly.  
Select it again to cancel.  
Icons change when the song is repeated or the folder is repeated.  
(AVRCP Ver. 1.3 or higher)  
Plays songs in the folder in random order.  
When selected again, the songs on the device are played in random order.  
Select it again to cancel.  
Icons change during folder shufÀe or device shufÀe.  
Scans the titles in a folder and plays the beginning of each song to aid in ¿nding a desired  
song.  
When selected again, the beginning of each song on the device is played.  
When selected again, the operation is cancelled and the song currently being played  
continues.  
Returns to the beginning of the previous song.  
Long-press to fast reverse. It stops when you remove your hand from the icon or the  
commander knob.  
Plays the Bluetooth® audio. When selected again, playback is temporarily stopped.  
Advances to the beginning of the next song.  
Long-press to fast forward. It stops when you remove your hand from the icon or the  
commander knob.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-50.  
5
–138  
Interior Features  
Bluetooth®  
Bluetooth® Audio Device  
Information Display  
Example of use (When searching for a  
song from the top level of a device)  
If a Bluetooth® audio device is connected,  
the following information is displayed in  
the centre display.  
1. Select the  
icon to display the  
folder/¿le list at the top level.  
AVRCP  
Ver. lower  
than 1.3  
AVRCP  
Ver. 1.4 or  
higher  
AVRCP  
Ver. 1.3  
Device name  
X
X
X
Remaining  
battery  
charge of  
device  
X
X
X
Song name  
Artist name  
Album name  
—
—
—
X
X
X
X
X
X
2. When the folder is selected, folders/¿le  
lists in the folder are displayed.  
When the playlist is selected, the ¿le  
list is displayed.  
Playback  
time  
—
—
—
X
X
X
X
Genre name  
3. Select the desired song.  
Album art  
image  
—
—
NOTE  
X: Available  
—: Not available  
Select  
to move to a folder one level  
higher.  
NOTE  
Some information may not display  
depending on the device, and if the  
information cannot be displayed,  
“Unknown - - -” is indicated.  
5
–139  
Interior Features  
Bluetooth®  
How to Use Aha™*  
Aha is an application which can be used to enjoy various Internet content such as Internet  
radio and podcasts.  
Stay connected to your friends activities by getting updates from Facebook and Twitter.  
Using the location-based service, nearby services and destinations can be searched or real-  
time local information can be obtained.  
For details on Aha, refer to “  
ꢀ
ꢀ
Aha, the Aha logo, and the Aha trade dress are trademarks or registered trademarks of  
Harman International Industries, Inc., used with permission.  
NOTE  
ꢀ ꢀ  
The service content provided by Aha varies depending on the country in which the user  
resides. In addition, the service is not available in some countries.  
To operate Aha from your Bluetooth® device, perform the following in advance:  
ꢀ ꢀ  
ꢀ ꢀ  
Install the Aha application to your device.  
Create an Aha account for your device.  
Log onto Aha using your device.  
Select the preset station on your device.  
ꢀ ꢀ  
ꢀ ꢀ  
ꢀ ꢀ  
Playback  
Select the  
icon on the home screen to display the Entertainment screen. When  
is  
selected, the following icons are displayed at the bottom of the centre display. The displayed  
icon differs depending on the selected station.  
In addition, icons other than the following icons may be displayed.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the main menu.  
Use to switch to other stations.  
Displays the content list.  
Use to switch to other desired content on the station.  
Shout  
Records voice.  
Records voice and posts it as playable audio to Facebook and other social stations.  
5
–140  
Interior Features  
Bluetooth®  
Icon  
Function  
Like*1  
Evaluates the current content as “Like”.  
Dislike*1  
Evaluates the current content as “Dislike”.  
Reverses for 15 seconds.  
Map (vehicles with navigation system)  
Displays the destination searched by the location based services on the navigation system.  
Call  
A call can be made to the telephone number of a shop searched using the Location Based  
Services. Available when a device is connected as a Hands-Free.  
Returns to the previous content.  
Pauses playback of the content. When selected again, playback resumes.  
Goes to the next content.  
Fast-forwards for 30 seconds.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-50.  
*1 Some stations may use alternate variations of Like and Dislike, based on station type or provider.  
5
–141  
Interior Features  
Bluetooth®  
Main menu  
Select the  
icon.  
Switch the tab and select the station category.  
Tab  
Function  
Displays the preset station list set on the device.  
Select the preset station name to play the station content.  
Presets  
Nearby  
Select the desired station.  
Guidance is provided to the searched destination near the vehicle's position.  
You can designate desired categories previously set using the ¿lter setting  
on your device.  
NOTE  
The available Location Based Services may differ because the services depend on the  
content provided by Aha™.  
5
–142  
Interior Features  
Bluetooth®  
Example of use (Location Based  
Services)  
S h o u t  
Some social stations, such as Facebook or  
Caraoke, support the ability to record and  
share voice messages using the “Shout”  
function.  
1. Select the desired station from the  
“Nearby” tab on the main menu.  
The destination name or address  
playback starts in the order of the  
destination name list.  
1. Select the icon and start the  
countdown (3, 2, 1, 0). Recording starts  
when the countdown reaches zero.  
2. Records voice.  
3. Select  
recording.  
and store/post the  
NOTE  
ꢀ ꢀ  
Recordable time varies depending on  
the station (Max. 30 seconds).  
2. When the  
icon is selected, the  
ꢀ ꢀ  
Recording stops automatically when  
the recordable time has elapsed. You  
can then post or delete the recording.  
currently displayed destination is  
displayed on the navigation system  
(vehicles with navigation system).  
3. When the icon is selected, a phone  
call is placed to the currently displayed  
destination.  
4. Select the  
content list.  
icon to display the  
Selection of other destinations from the  
list can be made.  
5
–143  
Interior Features  
Bluetooth®  
How to Use Stitcher™* Radio  
What is Stitcher™ Radio?  
Stitcher™ radio is an application which can be used to listen to Internet radio or stream  
podcasts.  
Recommended content is automatically selected by registering content which you put into  
your favourites, or by pressing the Like or Dislike button.  
For details on Stitcher™ Radio, refer to “  
ꢀ
ꢀ
Stitcher™, the Stitcher™ logo, and the Stitcher™ trade dress are trademarks or registered  
trademarks of Stitcher, Inc., used with permission.  
NOTE  
To operate Stitcher™ Radio from your Bluetooth® device, perform the following in  
advance:  
ꢀ ꢀ  
Install the Stitcher™ Radio application to your device.  
Create a Stitcher™ Radio account for your device.  
Log onto Stitcher™ Radio using your device.  
ꢀ ꢀ  
ꢀ ꢀ  
Playback  
Select the  
icon on the home screen to display the Entertainment screen. When  
is  
selected, the following icons are indicated in the bottom part of the centre display.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the station list.  
Use to switch to other stations.  
Dislike  
Evaluates the current programme as “Dislike”.  
Like  
Evaluates the current programme as “Like”.  
Adds the current station to your favourites or deletes the current station from your  
favourites.  
5
–144  
Interior Features  
Bluetooth®  
Icon  
Function  
Reverses for 30 seconds.  
Plays the station. Select it again to pause playback.  
Goes to the next station.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-50.  
Station list  
1. Select the  
icon to display the station list.  
Favourites station name: Select to display the programme registered to your  
favourites.  
Category name: A recommended category selected from your favourites by Stitcher™  
is displayed.  
Select it to display the category programme.  
2. Select the programme name to play it.  
5
–145  
Interior Features  
Bluetooth®  
Add to your favourites  
If the current programme has not been  
registered to your favourites, it can be  
registered to your favourites.  
1. Select the  
icon to display the  
favourites station which the registration  
can be added.  
2. Select the station name which you want  
to register.  
3. Select  
to add the programme to the  
selected favourites station.  
NOTE  
ꢀ ꢀ  
Multiple favourites stations can be  
selected and registered.  
ꢀ ꢀ  
Favourites stations registered by  
oneself as well those set by default  
are displayed.  
Delete from your favourites  
If the current programme has already  
been registered to your favourites, the  
programme can be deleted from your  
favourites.  
1. Select the  
icon.  
2. The programme is automatically  
deleted from the favourites station.  
5
–146  
Interior Features  
Bluetooth®  
Troubleshooting*  
Mazda Bluetooth® Hands-Free Customer Service  
If you have any problems with Bluetooth®, contact our toll-free customer service centre.  
Phone:  
(Germany)  
0800 4263 738 (8:00—18:00 Central European Time)  
(Except Germany)  
00800 4263 7383 (8:00—18:00 Central European Time)  
(Worldwide)  
49 (0) 6838 907 287 (8:00—18:00 Central European Time)  
W e b :  
Bluetooth® Device pairing, connection problems  
Symptom  
Cause  
Solution method  
First make sure the device is  
compatible with the Bluetooth®  
unit, and then check whether the  
Bluetooth® function and the Find  
Mode/Visible setting*1 on the  
device are turned on. If pairing is  
still not possible after this, contact  
an expert repairer, we recommend  
an Authorised Mazda Repairer or  
Mazda Bluetooth® Hands-Free  
Customer Service.  
Unable to perform pairing  
—
Perform pairing using the following  
procedure.  
The pairing information paired to  
the Bluetooth® unit or device is not  
recognised correctly.  
Pairing cannot be performed again  
Unable to perform pairing  
 
Clear “Mazda” stored in the device.  
Perform pairing again.  
 
The Bluetooth® function and the  
Find Mode/Visible setting*1 on the  
device may turn off automatically  
after a period of time has elapsed  
depending on the device.  
Check whether the Bluetooth®  
function and the Find Mode/Visible  
setting*1 on the device are turned on  
and pairing or reconnect.  
Does not connect automatically  
when starting the engine  
Automatically connects, but then  
disconnects suddenly  
The device is in a location in which  
radio wave interference can occur  
easily, such as inside a bag in a rear which radio wave interference is less  
Move the device to a location in  
Disconnects intermittently  
seat, in a rear pocket of a pair of  
pants.  
likely to occur.  
Does not connect automatically  
when starting the engine  
The pairing information is updated  
when the device OS is updated.  
Perform pairing again.  
*1 Setting which detects the existence of a device external to the Bluetooth® unit  
*Some models.  
5
–147  
Interior Features  
Bluetooth®  
NOTE  
ꢀ ꢀ  
When the OS of the device is updated, the pairing information may be deleted. If this  
happens, reprogramme the pairing information to the Bluetooth® unit.  
If you pair your phone which has already been paired to your vehicle more than once  
in the past, you need to delete “Mazda” on your mobile device. Then, execute the  
Bluetooth® search on your mobile device once again, and pair to a newly detected  
“Mazda”.  
ꢀ ꢀ  
Before you pair your device, make sure that Bluetooth® is “ON”, both on your phone  
and on the vehicle.  
ꢀ ꢀ  
Voice recognition related problems  
Symptom  
Cause  
Solution method  
 
Poor voice recognition  
Excessive, slow speech.  
Excessive, forceful speech  
(shouting).  
 
 
 
 
 
Regarding the causes indicated  
on the left, be careful with how  
you speak. In addition, when  
Speaking before the beep sound  
has ended.  
Loud noise (speaking or noise from numbers are spoken in a sequence,  
outside/inside vehicle).  
A i r Àow from A/C is blowing  
against the microphone.  
Speaking in off-standard  
expressions (dialect).  
False recognition of numbers  
recognition ability will improve  
if no stop is placed between the  
numbers.  
A poor connection or malfunction  
with the microphone may have  
occurred. Consult an expert repairer,  
we recommend an Authorised  
Mazda Repairer.  
There is a malfunction in the  
microphone.  
Poor voice recognition  
If there is any malfunction after  
checking the pairing situation, check  
for device pairing or connection  
problems.  
There is a problem with the  
connection between the Bluetooth®  
unit and the device.  
Phone-related voice recognition is  
disabled  
By carrying out the following  
measures, the rate of recognition  
will improve.  
 
Clear memory from the phonebook  
The Bluetooth® system is under a  
condition in which recognition is  
dif¿cult.  
Names in the phonebook are not  
easily recognised  
which is not used very often.  
Avoid shortened names, use full  
names. (Recognition improves the  
longer the name is. By not using  
names such as “Mum”, “Dad”,  
recognition will improve.)  
 
When operating the audio, a song  
name is not recognised  
Song names cannot be recognised  
by voice.  
—
5
–148  
Interior Features  
Bluetooth®  
Symptom  
Cause  
Solution method  
Guidance can be skipped by quickly  
pressing and releasing the Talk  
button.  
You want to skip guidance  
—
Regarding problems with calls  
Symptom  
Cause  
Solution method  
For about three seconds after  
starting a call, the Bluetooth®  
unit's Noise Suppression function  
requires time to adapt to the call  
environment.  
When starting a call, vehicle noise  
from the other party can be heard  
This does not indicate a problem  
with the device.  
The other party cannot be heard or  
the speaker's voice is quiet  
The volume is set at zero or low.  
Increase the volume.  
Other problems  
Symptom  
Cause  
Solution method  
The indication for the remaining  
battery is different between the  
vehicle and the device  
The indication method is different  
between the vehicle and the device.  
—
When a call is made from the  
vehicle, the telephone number is  
updated in the incoming/outgoing  
call record but the name does not  
appear  
If the number has been registered  
into the phonebook, the incoming/  
outgoing call record is updated by  
the name in the phonebook when the  
engine is restarted.  
The number has not been registered  
into the phonebook.  
The cell phone does not synchronize  
with the vehicle regarding the  
incoming/outgoing call record  
Some types of cell phones do not  
synchronize automatically.  
Operate the cell phone for  
synchronization.  
It takes a long time to complete the A maximum of 60 seconds is  
function for changing the language required.  
—
5
–149  

Related Topics

Interior Features
Air-Conditioning System Audio System Interior Equipment

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot