Seat Warmer/Heated StEesseenrtiianl SgafetWy Eqhuipemeenlt
1. If “Link Seat & Climate Control
Temperatures” has been disabled,
enable it using the following
procedure.
Seat Warmer*
Seat Warmer
▼
The front seats can be warmed up
while the engine is running.
a) Select “Settings” from the Mazda
Connect home screen.
While the seat warmer is operating,
the indicator light in the seat warmer
switch turns on according to the set
temperature.
b) Select “Vehicle Settings”.
c) Enable “Link Seat & Climate
Control Temperatures”.
2. Press the AUTO switch.
While in auto mode, the seat
temperature is automatically controlled
in 4 levels (High, Mid, Low, and OFF)
according to the conditions in the
cabin.
Manual mode
When the seat warmer switch is
pressed, the seat warmer operates in
manual mode.
The set temperature changes as shown
in the figure each time the seat warmer
switch is pressed.
NOTE
If the front passenger’s seat belt is
unfastened, the front passenger’s
seat warmer turns off.
If the seat warmer switch is pressed
during auto mode, the seat warmer
on the side where the switch was
pressed switches to manual mode.
To return to auto mode, press the
AUTO switch.
If the engine is turned off while the
seat warmer is operating in auto
mode, the seat warmer operates in
auto mode again the next time the
engine is turned on.
1. OFF
2. High
3. Mid
4. Low
WARNING
NOTE
If the engine is turned off while the
seat warmer is operating in manual
mode, the seat warmer does not turn
on automatically the next time the
engine is turned on. To turn the seat
warmer on, press the switch again.
Be careful when using the seat
warmer:
The heat from the seat warmer may be
too hot for the following people and
could cause a low-temperature burn.
Infants, small children, elderly
people, and physically challenged
people
People with delicate skin
People who are excessively fatigued
Auto mode
The driver and front passenger's seat
warmer can be operated in auto mode
using the following procedure.
2-17
*Some models.
