2013-2016 Mazda Cx-5 SUV Audio System User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Audio System for Your Mazda Cx-5 SUV First Generation (2013-2016)

Interior Features  
Audio System  
Antenna  
Operating Tips for Audio  
System  
Antenna  
WARNING  
Always adjust the audio while the  
vehicle is stopped:  
Do not adjust the audio control  
switches while driving the vehicle.  
Adjusting the audio while driving the  
vehicle is dangerous as it could  
distract your attention from the  
vehicle operation which could lead to  
a serious accident.  
Even if the audio control switches are  
equipped on the steering wheel, learn  
to use the switches without looking  
down at them so that you can keep  
your maximum attention on the road  
while driving the vehicle.  
CAUTION  
For the purposes of safe driving,  
adjust the audio volume to a level  
that allows you to hear sounds  
outside of the vehicle including car  
horns and particularly emergency  
vehicle sirens.  
NOTE  
l
To prevent the battery from being  
discharged, do not leave the audio system  
on for a long period of time when the  
engine is not running.  
l
If a cellular phone or CB radio is used in  
or near the vehicle, it could cause noise to  
occur from the audio system, however, this  
does not indicate that the system has been  
damaged.  
5-13  
Interior Features  
Audio System  
Do not spill any liquid on the audio  
system.  
FM characteristics  
An FM broadcast range is usually about  
40―50 km (25―30 miles) from the  
source. Because of extra coding needed to  
break the sound into two channels, stereo  
FM has even less range than monaural  
(non-stereo) FM.  
FM Station  
Do not insert any objects, other than CDs,  
into the slot.  
40—50km  
(25—30 miles)  
Signals from an FM transmitter are similar  
to beams of light because they do not  
bend around corners, but they do reflect.  
Unlike AM signals, FM signals cannot  
travel beyond the horizon. Therefore, FM  
stations cannot be received at the great  
distances possible with AM reception.  
qRadio Reception  
AM characteristics  
Ionosphere  
AM signals bend around such things as  
buildings or mountains and bounce off the  
ionosphere.  
FM wave  
AM wave  
Therefore, they can reach longer distances  
than FM signals.  
FM wave  
Because of this, two stations may  
sometimes be picked up on the same  
frequency at the same time.  
100—200 km (60—120 miles)  
Atmospheric conditions can also affect  
FM reception. High humidity will cause  
poor reception. However, cloudy days  
may provide better reception than clear  
days.  
Ionosphere  
Station 1  
Station 2  
5-14  
Interior Features  
Audio System  
Multipath noise  
Weak signal noise  
Since FM signals can be reflected by  
obstructions, it is possible to receive both  
the direct signal and the reflected signal at  
the same time. This causes a slight delay  
in reception and may be heard as a broken  
sound or a distortion. This problem may  
also be encountered when in close  
In suburban areas, broadcast signals  
become weak because of distance from  
the transmitter. Reception in such fringe  
areas is characterized by sound breakup.  
proximity to the transmitter.  
Reflected wave  
Direct  
Strong signal noise  
This occurs very close to a transmitter  
tower. The broadcast signals are  
extremely strong, so the result is noise and  
sound breakup at the radio receiver.  
Flutter/Skip noise  
Signals from an FM transmitter move in  
straight lines and become weak in valleys  
between tall buildings, mountains, and  
other obstacles. When a vehicle passes  
through such an area, the reception  
conditions may change suddenly, resulting  
in annoying noise.  
Station drift noise  
When a vehicle reaches the area of two  
strong stations broadcasting at similar  
frequencies, the original station may be  
temporarily lost and the second station  
picked up. At this time there will be some  
noise from this disturbance.  
Station 2  
88.3 MHz  
Station 1  
88.1 MHz  
5-15  
Interior Features  
Audio System  
l
If the memory portion of the CD is  
transparent or translucent, do not use  
the disc.  
qOperating Tips for CD Player  
Condensation phenomenon  
Immediately after turning on the heater  
when the vehicle is cold, the CD or  
optical components (prism and lens) in the  
CD player may become clouded with  
condensation. At this time, the CD will  
eject immediately when placed in the unit.  
A clouded CD can be corrected simply by  
wiping it with a soft cloth. Clouded  
Transparent  
optical components will clear naturally in  
about an hour. Wait for normal operation  
to return before attempting to use the unit.  
l
A new CD may have rough edges on  
its inner and outer perimeters. If a disc  
with rough edges is used, proper  
setting will not be possible and the CD  
player will not play the CD. In  
Handling the CD player  
The following precautions should be  
observed.  
addition, the disc may not eject  
l
resulting in a malfunction. Remove the  
rough edges in advance by using a ball-  
point pen or pencil as shown below. To  
remove the rough edges, rub the side of  
the pen or pencil against the inner and  
outer perimeter of the CD.  
Do not use deformed or cracked CDs.  
The disc may not eject resulting in a  
malfunction.  
l
Do not use non-conventional discs  
such as heart-shaped, octagonal discs,  
etc. The disc may not eject resulting in  
a malfunction.  
l
When driving over uneven surfaces,  
the sound may jump.  
5-16  
Interior Features  
Audio System  
l
l
CDs bearing the logo shown in the  
illustration can be played. No other  
discs can be played.  
Do not use record sprays, antistatic  
agents, or household spray cleaners.  
Volatile chemicals such as benzine and  
thinner can also damage the surface of  
the CD and must not be used. Anything  
that can damage, warp, or fog plastic  
should never be used to clean CDs.  
The CD player ejects the CD if the CD  
is inserted upside down. Also dirty  
and/or defective CDs may be ejected.  
Do not insert cleaning discs in the CD  
player.  
l
l
l
l
l
l
Use discs that have been legitimately  
produced. If illegally-copied discs such  
as pirated discs are used, the system  
may not operate properly.  
Be sure never to touch the signal  
surface when handling the CDs. Pick  
up a CD by grasping the outer edge or  
the edge of the hole and the outer edge.  
Do not insert any disc with a peel-off  
seal affixed to it.  
This unit may not be able to play  
certain CD-R/CD-RWs made using a  
computer or music CD recorder due to  
disc characteristics, scratches,  
smudges, dirt, etc., or due to dust or  
condensation on the lens inside the  
unit.  
Storing CDs in the vehicle exposed to  
direct sunlight or high temperature may  
damage the CD-R/CD-RWs, and make  
them unplayable.  
l
l
l
CD-R/CD-RW exceeding 700 MB  
cannot be played.  
This unit may not be able to play  
certain discs made using a computer  
due to the application (writing  
software) setting used. (For details,  
consult the store where the application  
was purchased.)  
It is possible that certain text data, such  
as titles, recorded on a CD-R/CD-RW  
may not be displayed when musical  
data (CD-DA) is playing.  
l
l
Do not stick paper or tape on the CD.  
Avoid scratching the reverse side (the  
side without a label). The disc may not  
eject resulting in a malfunction.  
Dust, finger smudges, and dirt can  
decrease the amount of light reflected  
from the signal surface, thus affecting  
sound quality. If the CD should  
become soiled, gently wipe it with a  
soft cloth from the center of the CD to  
the edge.  
l
l
l
The period from when a CD-RW is  
inserted to when it begins playing is  
longer than a normal CD or CD-R.  
Completely read the instruction manual  
and cautions for CD-R/CD-RWs.  
5-17  
Interior Features  
Audio System  
l
l
l
l
Do not use discs with cellophane tape  
This audio system handles MP3 files  
that have been recorded on CD-R/CD-  
RW/CD-ROMs.  
When naming an MP3 file, be sure to  
add an MP3 file extension (.mp3) after  
the file name.  
adhering, partially peeled off labels, or  
adhesive material exuding from the  
edges of the CD label. Also, do not use  
discs with a commercially-available  
CD-R label affixed. The disc may not  
eject resulting in a malfunction.  
The number of characters which can be  
displayed is restricted.  
qOperating Tips for MP3  
qOperating Tips for WMA  
MP3 stands for MPEG Audio Layer 3,  
which is standardized voice compression  
established by the ISO*1 working group  
(MPEG).  
WMA is short for Windows Media Audio  
and is the audio compression format used  
by Microsoft.  
Use of MP3 allows for audio data to be  
compressed to approximately a tenth of  
the source data size.  
This unit plays files with the extension  
(.mp3) as MP3 files.  
Audio data can be created and stored at a  
higher compression ratio than MP3.  
This unit plays files with the extension (.  
wma) as WMA files.  
* Microsoft and Windows Media are  
registered trademarks of Microsoft  
Corporation U.S. in the United States  
and other countries.  
*1 International Organization for  
Standardization  
CAUTION  
Do not use an audio file extension on  
files other than audio files. In  
CAUTION  
Do not use an audio file extension on  
files other than audio files. In  
addition, do not change the audio file  
extension. Otherwise, the unit will  
not recognize the file correctly  
addition, do not change the audio file  
extension. Otherwise, the unit will  
not recognize the file correctly  
resulting in noise or a malfunction.  
resulting in noise or a malfunction.  
NOTE  
Supply of this product only conveys a license  
for private, non-commercial use and does not  
convey a license nor imply any right to use this  
product in any commercial (i.e. revenue-  
generating) real time broadcasting (terrestrial,  
satellite, cable and/or any other media),  
broadcasting/streaming via the Internet,  
intranets and/or other networks or in other  
electronic content distribution systems, such as  
pay-audio or audio-on-demand applications.  
An independent license for such use is  
required. For details, please visit  
l
WMA files written under specifications  
other than the indicated specification  
may not play normally or files or folder  
names may not display correctly.  
l
The file extension may not be provided  
depending on the computer operating  
system, version, software, or settings.  
In this case, add the file extension “.  
wma” to the end of the file name, and  
then write it to the disc.  
http://www.mp3licensing.com.  
5-18  
Interior Features  
Audio System  
qOperating Tips for AAC  
CAUTION  
Do not use an audio file extension on  
files other than audio files. In  
AAC stands for Advanced Audio Coding,  
which is standardized voice compression  
established by the ISO*1 working group  
(MPEG). Audio data can be created and  
stored at a higher compression ratio than  
MP3.  
This unit plays files with the extensions (.  
aac/.m4a/.wav*2) as the AAC files.  
*1 International Organization for  
Standardization  
addition, do not change the audio file  
extension. Otherwise, the unit will  
not recognize the file correctly  
resulting in noise or a malfunction.  
l
l
OGG files written under specifications  
other than the indicated specification  
may not play normally or files or folder  
names may not display correctly.  
The file extension may not be provided  
depending on the computer operating  
system, version, software, or settings.  
In this case, add the file extension “.  
ogg” to the end of the file name, and  
then write it to the disc.  
*2 Type B  
CAUTION  
Do not use an audio file extension on  
files other than audio files. In  
addition, do not change the audio file  
extension. Otherwise, the unit will  
not recognize the file correctly  
qOperating Tips for USB device  
resulting in noise or a malfunction.  
This unit plays audio files as follows:  
l
AAC files written under specifications  
other than the indicated specification  
may not play normally or files or folder  
names may not display correctly.  
Extension  
.mp3  
Playback with this unit  
MP3  
.wma  
WMA  
l
The file extension may not be provided  
.aac  
depending on the computer operating  
system, version, software, or settings.  
In this case, add the file extension “.  
aac”, “.m4a”, or “.wav*2” to the end of  
the file name, and then write it to the  
memory.  
.m4a  
AAC  
OGG  
.wav*1  
.ogg*1  
*1 Type B  
CAUTION  
*2 Type B  
Do not use an audio file extension on  
files other than audio files. In  
qOperating Tips for OGG  
addition, do not change the audio file  
extension. Otherwise, the unit will  
not recognize the file correctly  
OGG is the audio compression format for  
Xiph. Org Foundation.  
Audio data can be created and stored at a  
higher compression ratio than MP3.  
This unit plays files with the extension (.  
ogg) as OGG files.  
resulting in noise or a malfunction.  
5-19  
Interior Features  
Audio System  
NOTE  
CAUTION  
l
Playback may not be possible depending on  
the type and condition of the USB flash  
memory even if the audio file complies with  
the standard above.  
A copyright protected WMA/AAC file  
cannot be played in this unit.  
The order of the music data stored in the  
device may differ from the playback order.  
To prevent loss or damage of stored data,  
we recommend that you always back up  
your data.  
If a device exceeds the maximum electric  
current value of 1,000 mA, it may not  
operate or recharge when connected.  
Do not pull out the USB device while in the  
USB mode (only pull it out while in FM/AM  
radio or CD mode).  
Ø Remove the iPod when it is not in  
use. Because the iPod is not  
designed to withstand excessive  
changes in temperature inside the  
cabin, it could be damaged or the  
battery may deteriorate due to the  
excessive temperature or humidity  
inside the cabin if it is left in the  
vehicle.  
Ø If data in the iPod is lost while it is  
connected to the unit, Mazda  
cannot guarantee recovery of any  
lost data.  
Ø If the iPod battery is deteriorated,  
the iPod may not recharge and  
playback may not be possible  
when it is connected to the unit.  
Ø For details on using the iPod, refer  
to the iPod instruction manual.  
Ø When connecting the iPod to a  
USB port, all commands are made  
from the audio unit. iPod control is  
not possible.  
l
l
l
l
l
l
The device will not operate if the data is  
password protected.  
MP3/WMA/AAC/OGG*1 files written  
l
under specifications other than the  
indicated specification may not play  
normally or files/folder names may not  
display correctly.  
*1 Type B  
NOTE  
The audio unit cannot display images or  
videos stored in an iPod.  
qOperating Tips for iPod  
This unit supports playback of music files  
recorded to an iPod.  
* iPod is a trademark of Apple Inc.,  
registered in the U.S. and other  
countries.  
The iPod may not be compatible  
depending on the model or OS version. In  
this case, an error message is displayed.  
5-20  
Interior Features  
Audio System  
Audio Set [Type A (non-touchscreen)]  
Power/Volume/Sound Controls ......................................................................... page 5-22  
Clock ................................................................................................................. page 5-24  
Operating the Radio ........................................................................................... page 5-26  
Operating the Compact Disc (CD) Player .......................................................... page 5-28  
How to use Auxiliary jack/USB port ................................................................. page 5-31  
Error Indications ................................................................................................ page 5-31  
5-21  
Interior Features  
Audio System  
qPower/Volume/Sound Controls  
Audio display  
Power/Volume dial  
Audio control dial  
Power ON/OFF  
2. Turn the audio control dial to adjust the  
selected functions as follows:  
Switch the ignition to ACC or ON. Press  
the power/volume dial to turn the audio  
system on. Press the power/volume dial  
again to turn the audio system off.  
Setting value  
Turn  
Indication  
Turn  
Counterclock-  
wise  
Clockwise  
Volume adjustment  
ALC  
(Automatic  
volume  
adjustment)  
To adjust the volume, turn the power/  
volume dial. Turn the power/volume dial  
clockwise to increase volume,  
Level decrease Level increase  
BASS  
(Low pitch sound)  
Decrease bass Increase bass  
Decrease treble Increase treble  
Shift the sound Shift the sound  
counterclockwise to decrease it.  
TREB  
(Treble sound)  
Audio sound adjustment  
1. Press the audio control dial to select the  
function. The selected function will be  
indicated.  
FADE  
(Front/back  
volume balance)  
to the front  
to the rear  
BAL  
(Left/right volume  
balance)  
Shift the sound Shift the sound  
to the left  
Off  
to the right  
On  
BEEP  
(Audio operation  
sound)  
BT SETUP*1  
Select mode  
12Hr  
(12 Hr/24 Hr time  
adjustment)  
24Hr  
12Hr  
(Flashing)  
24Hr  
(Flashing)  
*1 Depending on the model, this function  
may not be available.  
5-22  
Interior Features  
Audio System  
NOTE  
If not operated for several seconds, the display  
returns to the previous display. To reset bass,  
treble, fade, and balance, press the audio  
control dial for 2 seconds. The unit will beep  
and “CLEAR” will be displayed.  
ALC (Automatic volume adjustment)  
The automatic level control (ALC)  
changes the audio volume automatically  
according to the vehicle speed. The faster  
the vehicle speed, the higher the volume  
increases. ALC has ALC OFF and ALC  
LEVEL 1 to 7 modes. At ALC LEVEL 7,  
the amount that the volume can increase is  
at the maximum. Select the mode  
according to the driving conditions.  
BEEP (Audio operation sound)  
The setting for the operation sound when  
pressing and holding a button can be  
changed. The initial setting is ON. Set to  
OFF to mute the operation sound.  
BT SETUP modeí  
Music and other audio such as voice data  
recorded on portable audio devices and  
mobile phones available on the market  
which are equipped with the Bluetooth®  
transmission function can be listened to  
via wireless transmission over the  
vehicle's speakers. Using the BT SETUP  
mode, these devices can be programmed  
to the Bluetooth® unit or changed.  
Refer to Bluetooth® Preparation (Type A)  
on page 5-71.  
12Hr  
24Hr (12 Hr/24 Hr time  
adjustment)  
Rotating the audio control dial switches  
the display between 12 and 24-hour clock  
time.  
Refer to Clock on page 5-24.  
íSome models.  
5-23  
Interior Features  
Audio System  
qClock  
Clock button  
Audio display  
Hour set button :00 button  
Minute set button  
Audio control dial  
Setting the time  
3. When the button is pressed, the time  
will be reset as follows:  
(Example)  
The clock can be set at any time when the  
ignition is switched to ACC or ON.  
12:01―12:29→12:00  
12:30―12:59→1:00  
1. To adjust the time, press the clock  
button (  
until a beep is heard.  
) for about 2 seconds  
NOTE  
l
When the :00 button is pressed, the seconds  
2. The clock's current time will flash.  
will start at “00”.  
Time adjustment  
l
Switching between 12 and 24-hour clock  
time:  
l
To adjust the time, press the hour/  
Press the audio control dial several times  
until 12 and 24-hour clock time are  
displayed. Turn the audio control dial in  
either direction, select the desired clock  
setting while the preferred clock time is  
flashing.  
minute set button (H, M) while the  
clock's current time is flashing.  
The hours advance while the hour  
l
set button (H) is pressed. The  
minutes advance while the minute  
set button (M) is pressed.  
3. Press the clock button (  
to start the clock.  
) again  
Time resetting  
1. Press the clock button (  
) for  
about 2 seconds until a beep is heard.  
2. Press the :00 button.  
5-24  
MEMO  
5-25  
Interior Features  
Audio System  
qOperating the Radio  
Audio display  
Seek tuning buttons  
Channel preset buttons  
Band selector button Scan button  
Auto memory button  
Manual tuning dial  
Radio ON  
Seek tuning  
Pressing the seek tuning button (  
will cause the tuner to seek a higher or  
lower frequency automatically.  
Press a band selector button (  
turn the radio on.  
) to  
,
)
Band selection  
NOTE  
Successively pressing the band selector  
button ( ) switches the bands as  
follows: FM1→FM2→AM.  
If you continue to press and hold the button,  
the frequency will continue changing without  
stopping.  
The selected mode will be indicated.  
Scan tuning  
NOTE  
Press the scan button (  
) to  
If the FM broadcast signal becomes weak,  
reception automatically changes from  
STEREO to MONO for reduced noise.  
automatically sample strong stations.  
Scanning stops at each station for about 5  
seconds. To hold a station, press the scan  
button (  
) again during this interval.  
Tuning  
Preset channel tuning  
The radio has the following tuning  
methods: Manual, Seek, Scan, Preset  
channel, and Auto memory tuning. The  
easiest way to tune stations is to set them  
on preset channels.  
The 6 preset channels can be used to store  
6 AM and 12 FM stations.  
1. To set a channel first select AM, FM1,  
or FM2. Tune to the desired station.  
Manual tuning  
2. Press a channel preset button for about  
2 seconds until a beep is heard. The  
preset channel number or station  
frequency will be displayed. The  
station is now held in the memory.  
Turning the manual tuning dial will  
change the frequency higher or lower.  
5-26  
Interior Features  
Audio System  
3. Repeat this operation for the other  
stations and bands you want to store.  
To tune one in the memory, select AM,  
FM1, or FM2 and then press its  
channel preset button. The station  
frequency or the channel number will  
be displayed.  
Auto memory tuning  
This is especially useful when driving in  
an area where the local stations are not  
known.  
Press and hold the auto memory button  
(
) for about 2 seconds until a beep  
is heard; the system will automatically  
scan and temporarily store up to 6 stations  
with the strongest frequencies in each  
selected band in that area.  
After scanning is completed, the station  
with the strongest frequency will be tuned  
and its frequency displayed. Press and  
release the auto memory button (  
to recall stations from the auto-stored  
stations. One stored station will be  
selected each time and its frequency and  
channel number will be displayed.  
)
NOTE  
If no stations can be tuned after scanning  
operations, “A” will be displayed.  
5-27  
Interior Features  
Audio System  
qOperating the Compact Disc (CD) Player  
Random button  
Repeat button  
Play/Pause button  
CD slot  
Audio display  
CD eject button  
Track up/Fast-forward button  
Track down/Reverse button  
Folder up button  
Folder down button  
File dial  
Scan button  
CD play button  
Playable data  
Text button  
Type  
Pause  
l
l
To stop playback, press the Play/Pause  
button (5).  
Press the button again to resume  
playback.  
Music data (CD-DA)  
MP3/WMA/AAC file  
Music/MP3/WMA/  
AAC CD player  
NOTE  
If a disc has both music data (CD-DA) and  
MP3/WMA/AAC files, playback of the two or  
three file types differs depending on how the  
disc was recorded.  
Fast-forward/Reverse  
Press and hold the fast-forward button  
(
) to advance through a track at high  
speed. Press and hold the reverse button  
) to reverse through a track at high  
Inserting the CD  
(
speed.  
Insert the CD into the slot, label-side up.  
The auto-loading mechanism will set the  
CD and begin play.  
Track search  
Press the track up button ( ) or turn the  
file dial clockwise once to skip forward to  
the beginning of the next track.  
Press the track down button ( ) or turn  
the file dial counterclockwise within a few  
seconds after playback begins to track  
down to the beginning of the previous  
track.  
Press the track down button ( ) or turn  
the file dial counterclockwise after a few  
seconds have elapsed to start playback  
from the beginning of the current track.  
NOTE  
There will be a short lapse before play begins  
while the player reads the digital signals on  
the CD.  
Ejecting the CD  
Press the CD eject button ( ) to eject the  
CD.  
Playback  
Press the CD play button ( ) to start  
play when a CD is in the unit. If a CD is  
not in the unit when the CD play button  
(
) is pressed, “NO DISC” will flash on  
and off.  
5-28  
Interior Features  
Audio System  
Folder search (during MP3/WMA/AAC  
CD playback)  
During MP3/WMA/AAC CD playback  
(Track repeat)  
To change to the previous folder, press the  
folder down button ( ), or press the  
folder up button ( ) to advance to the  
next folder.  
1. Press the repeat button (1) during  
playback to play the current track  
repeatedly. “TRACK RPT” is  
displayed ( is displayed next to RPT  
at the bottom of the display area).  
Music scan  
During music CD playback  
2. To cancel the repeat playback, press the  
button again after 3 seconds.  
This function scans the titles on a CD and  
plays 10 seconds of each song to aid you  
in finding a song you want to listen to.  
(Folder repeat)  
1. Press the repeat button (1) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks in the current folder repeatedly.  
Press the scan button (  
playback to start the scan play operation  
(the track number will flash). Press the  
) during  
scan button (  
playback.  
) again to cancel scan  
“FOLDER RPT” is displayed (  
is  
displayed next to RPT at the bottom of  
the display area).  
During MP3/WMA/AAC CD playback  
This function scans the titles in a folder  
currently being played and plays 10  
seconds of each song to aid you in finding  
a song you want to listen to. Press the  
2. Press the button again to cancel the  
repeat playback.  
Random playback  
scan button (  
) during playback to  
Tracks are randomly selected and played.  
start the scan play operation (the track  
number will flash).  
During music CD playback  
Press the scan button (  
cancel scan playback.  
) again to  
1. Press the random button (2) during  
playback to play the tracks on the CD  
randomly. “DISC RDM” is displayed  
NOTE  
If the unit is left in scan, normal playback will  
(
is displayed next to RDM at the  
resume where scan was selected.  
bottom of the display area).  
2. Press the button again to cancel the  
random playback.  
Repeat playback  
During music CD playback  
During MP3/WMA/AAC CD playback  
(Folder random)  
1. Press the repeat button (1) during  
playback to play the current track  
repeatedly. “TRACK RPT” is  
1. Press the random button (2) during  
playback to play the tracks in the folder  
randomly. “FOLDER RDM” is  
displayed ( is displayed next to RPT  
at the bottom of the display area).  
displayed (  
RDM at the bottom of the display  
area).  
is displayed next to  
2. Press the button again to cancel the  
repeat playback.  
5-29  
Interior Features  
Audio System  
2. To cancel the random playback, press  
the button again after 3 seconds.  
NOTE  
l
The information viewable in the display is  
only CD information (such as artist name,  
song title) which has been recorded to the  
CD.  
This unit cannot display some characters.  
Characters which cannot be displayed are  
indicated by an asterisk ( ).  
(CD random)  
1. Press the random button (2) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks on the CD randomly. “DISC  
RDM” is displayed ( is displayed  
next to RDM at the bottom of the  
display area).  
l
Display scroll  
Only 13 characters can be displayed at  
one time. To display the rest of the  
characters of a long title, press and hold  
2. Press the button again to cancel the  
random playback.  
the text button (  
scrolls the next 13 characters. Press and  
hold the text button ( ) again after  
). The display  
Switching the display  
The information displayed on the audio  
display changes as follows each time the  
text button (  
playback.  
the last 13 characters have been displayed  
to return to the beginning of the title.  
) is pressed during  
NOTE  
The number of characters which can be  
displayed is restricted.  
Music CD  
Information displayed  
on audio display  
Button  
Message display  
Track number/Elapsed  
time  
If “CHECK CD” is displayed, it means  
that there is some CD malfunction. Check  
the CD for damage, dirt, or smudges, and  
then properly reinsert it. If the message  
appears again, insert another known good  
CD. If the message continues to appear,  
take the unit to an Authorized Mazda  
Dealer for service.  
Track number  
Track name  
Album name  
Artist name  
MP3/WMA/AAC CD  
Information displayed  
on audio display  
Button  
File number/Elapsed time  
Folder number/File  
number  
File name  
Folder name  
Album name  
Song name  
Artist name  
5-30  
Interior Features  
Audio System  
q
How to use Auxiliary jack/USB port  
Audio can be heard from the vehicle's  
speakers by connecting a commercially-  
available portable audio unit to the  
auxiliary jack.  
Use a commercially-available, non-  
impedance (3.5 ) stereo mini plug cable.  
Contact an Authorized Mazda Dealer for  
details.  
In addition, audio can be played from the  
vehicle audio device by connecting a USB  
device to the USB port.  
Refer to AUX/USB mode on page 5-52.  
qError Indications  
If you see an error indication on the audio  
display, find the cause in the chart. If you  
cannot clear the error indication, take the  
vehicle to an Authorized Mazda Dealer.  
Indication  
Cause  
Solution  
Insert the CD properly. If  
the error indication  
continues to display,  
consult an Authorized  
Mazda Dealer.  
CD is  
inserted  
upside  
down  
CHECK CD  
Insert another CD  
properly. If the error  
indication continues to  
display, consult an  
Authorized Mazda  
Dealer.  
CD is  
defective  
5-31  
Interior Features  
Audio System  
Audio Set [Type B (touchscreen)]  
NOTE  
The explanation of functions described in this manual may differ from the actual operation, and  
the shapes of screens and buttons and the letters and characters displayed may also differ from the  
actual appearance.  
Additionally, depending on future software updates, the content may successively change without  
notice.  
Audio Set (Type B) has three different human interfaces.  
l
Commander switch  
Touch panel  
Voice recognition with steering switch and microphone  
l
l
Commander switch operation  
NOTE  
For safety reasons, some operations are disabled while the vehicle is being driven.  
Volume dial operation  
Volume dial  
Press the volume dial to switch the audio MUTE on and off.  
Turn the volume dial to adjust the volume. The volume increases by turning the dial  
clockwise, and decreases by turning it counterclockwise.  
5-32  
Interior Features  
Audio System  
Switches around commander knob  
The following operations can be done by pressing the switches around the commander  
knob.  
: Displays the home screen.  
: Displays the Entertainment screen.  
: Displays the Navigation screen (Only navigation-equipped vehicles). For operation  
of the Navigation screen, refer to the navigation system manual. If the SD card for the  
navigation system is not inserted, the compass indicating the direction in which the vehicle  
is moving is displayed.  
: Displays the Favorites screen. Long-press to store particular items in Favorites.  
(Radio, phonebook and destination of the navigation system can be programmed.)  
: Returns to previous screen.  
Commander knob operation  
(Selection of icons on screen)  
1. Tilt or turn the commander knob and move the cursor to the desired icon.  
2. Press the commander knob and select the icon.  
5-33  
Interior Features  
Audio System  
NOTE  
Long-press operation of the commander knob is also possible for some functions.  
Touch panel operation  
CAUTION  
Do not press the screen strongly or press it with a sharp-pointed object. Otherwise,  
the screen could be damaged.  
NOTE  
For safety reasons, operation of the center display is disabled while the vehicle is being driven.  
However, items not displayed in gray can be operated using the commander switch while the vehicle  
is being driven.  
qBasic Operation Method  
TOUCH & TAP  
1. Touch or tap on the item indicated on the screen.  
2. The operation is launched and the next item is displayed.  
5-34  
Interior Features  
Audio System  
SLIDE  
1. Touch the setting item displaying a slider bar.  
2. Touch the slider with your finger and move to the desired level.  
SWIPE  
1. Touch the screen with your finger and move up or down.  
2. Items which were not displayed can be displayed.  
Return to previous screen  
Touch the  
Displaying the home screen  
Touch the  
.
.
5-35  
Interior Features  
Audio System  
qHome screen  
Icon  
Function  
Applications  
Information such as average fuel economy, maintenance, and warnings can be verified.  
Depending on the grade and specification, the screen display may differ.  
Entertainment  
Operates audio such as the radio and CDs. The audio source most recently used is  
displayed. An audio source which cannot be used at that time is skipped and the previous  
audio source is displayed.  
To change the audio source, select the  
icon again.  
Communication  
Bluetooth® related functions are available.  
Navigation  
Navigation screen is displayed (vehicles with navigation system).  
If the SD card for the navigation system is not inserted, the compass indicating the direction  
in which the vehicle is moving is displayed.  
The compass may not indicate the correct bearing when the vehicle is stopped or traveling  
at a slow speed.  
Settings  
Overall setting menu (Such as display, sound, Bluetooth® and Language).  
Depending on the grade and specification, the screen display may differ.  
qVolume/Display/Sound Controls  
Audio control switch  
Commander switch  
Volume dial  
Volume switch  
5-36  
Interior Features  
Audio System  
Volume adjustment  
Display setting reset  
Turn the commander switch volume dial.  
The volume switch on the steering switch  
can also be pressed.  
All of the screen setting values can be  
reset to their initial settings.  
1. Select  
2. Select  
.
Display setting  
.
Select the  
icon on the home screen  
Audio sound adjustment  
Select the icon on the home screen  
and display the Settings screen.  
and display the Settings screen.  
Select the  
tab to select the item  
you would like to change.  
Select the  
would like to change.  
tab to select the item you  
Display OFF/Clock  
The center display can be turned off.  
Select  
off.  
Indication  
Setting value  
to turn the display  
Side: Low pitch  
Bass  
(Low pitch sound)  
enhancement  
Side: Low pitch  
reduction  
When  
is  
selected the center display turns off and  
the clock is displayed.  
The center display can be turned back on  
as follows:  
Side: Treble  
enhancement  
Side: Treble reduction  
Treble  
(Treble sound)  
Front: Front speaker  
volume enhancement  
Rear: Rear speaker  
volume enhancement  
l
Touch the center display.  
Operate the commander switch.  
Fade  
l
(Front/Rear volume  
balance)  
Daytime/nighttime (System) screen  
setting  
Right: Right speaker  
volume enhancement  
Left: Left speaker volume  
enhancement  
Balance  
(Left/right volume  
balance)  
The daytime or nighttime screen can be  
selected.  
: Switches screen automatically  
according to headlight illumination  
condition*1  
ALC*2  
(Automatic volume  
adjustment)  
Centerpoint®*3  
(Automatic surround  
level adjustment)  
AudioPilot®*3  
(Automatic volume  
adjustment)  
Off―Adjustment at  
seven levels  
: Daytime screen setting  
On/Off  
: Nighttime screen setting  
*1 The display is constantly on daytime  
screen when the illumination dimmer  
is cancelled.  
On/Off  
On/Off  
Beep  
Brightness adjustment  
(Audio operation sound)  
Adjust the center display brightness using  
the slider.  
*2 Standard audio  
*3 Bose® Sound System  
Contrast adjustment  
Adjust the center display contrast using  
the slider.  
5-37  
Interior Features  
Audio System  
ALC (Automatic volume adjustment)  
The automatic level control (ALC) is a  
feature that automatically adjusts audio  
volume and sound quality according to  
the vehicle speed. The volume increases  
in accordance with the increase in vehicle  
speed, and decreases as vehicle speed  
decreases.  
Centerpoint®*4 (Automatic surround  
level adjustment)  
Centerpoint® lets vehicle owners enjoy a  
Bose® surround sound experience from  
their existing CDs, MP3s and satellite  
radio.  
Specifically engineered to meet the  
unique demands of reproducing surround  
sound in a vehicle.  
Converts stereo signals to multiple  
channels allowing greater precision when  
reproducing the sound.  
An enhanced algorithm to simultaneously  
create a wider, more spacious sound field.  
*4 Centerpoint® is a registered trademark  
of Bose Corporation.  
AudioPilot®*5 (Automatic volume  
adjustment)  
When driving, background noise can  
interfere with enjoying music.  
AudioPilot® noise compensation  
technology continuously adjusts the music  
to compensate for background noise and  
vehicle speed.  
It reacts only to sustained noise sources  
and not intermittent ones, such as speed  
bumps.  
An enhanced DSP algorithm allows faster  
and more effective compensation for  
unusual situations, such as driving on a  
very rough road or at high speeds.  
*5 AudioPilot® is a registered trademark  
of Bose Corporation.  
5-38  
Interior Features  
Audio System  
qOperating the Radio  
Radio ON  
Select the  
icon on the home screen and display the Entertainment screen. When  
selecting the desired radio, the following icons are indicated in the lower part of the center  
display.  
AM/FM Radio  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the station list.  
Select  
to display the frequencies of up to ten radio stations on the auto  
memory preset list.  
Select the desired frequency.  
Displays the Favorites list. Long-press to store radio station currently being aired.  
Switches the  
on and off. Displays the multi-cast channel list of the  
.
You can search for receivable radio stations.  
Scanning stops at each station for about five seconds.  
Select again to continue receiving the radio station.  
You can change the radio frequency manually.  
Rotate the commander knob, slide the screen, or touch the radio frequency.  
Press  
When  
or  
or  
to change the radio frequency one step at a time.  
is long-pressed, the radio frequency changes continually. It stops when  
you remove your hand from the icon or the commander knob.  
Launches the iTunes Tagging function (for Apple devices with USB use only). Can be used  
when the  
is on.  
Automatic radio station selection.  
When long-pressed, the radio frequency changes continually. It stops when you remove  
your hand from the icon or the commander knob.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-36.  
5-39  
Interior Features  
Audio System  
Favorites Radio  
Changing Favorites list order  
Selected stations can be registered for  
convenient operation. Up to 50 stations  
can be registered. The Favorites list is  
common to AM, FM, and satellite radio.  
1. Select the  
Favorites list.  
icon to display the  
2. Select  
.
3. Select  
.
Registering to Favorites  
4. Select a radio frequency. The selected  
radio station can be moved.  
Long-press the  
icon to register the  
current radio station. The registration can  
also be performed using the following  
procedure.  
5. Slide the radio station or move it using  
the commander switch, then select  
.
1. Select the  
Favorites list.  
icon to display the  
Radio Broadcast Data System  
(RBDS)í  
2. Select  
3. Select  
.
Radio text information display  
.
Radio text information sent from a  
broadcasting station is displayed in the  
center display.  
4. The station is added to the bottom of  
the Favorites list.  
NOTE  
NOTE  
If the battery is disconnected, your Favorites  
list will be not deleted.  
Radio text information is a function of FM  
radio. Text information is not displayed in the  
following:  
Selecting radio station from Favorites  
l
During  
reception  
1. Select the  
Favorites list.  
icon to display the  
l
l
Not an RBDS broadcast  
RBDS broadcast, but radio text is not  
transmitted from the radio station  
2. Select the radio frequency to tune in  
the radio station.  
Genre Seek  
Deleting from Favorites  
Some FM stations transmit Genre codes  
(Program type like a Rock, News, and so  
on). This code enables alternative stations  
transmitting the same Genre code to be  
found quickly.  
1. Select the  
Favorites list.  
icon to display the  
2. Select  
.
3. Select  
.
(To scan for Genre Seek:)  
4. Select the radio frequency you want to  
delete.  
1. Select the  
mode.  
icon while in the FM  
5. Select  
.
2. Select  
to open the genre list.  
3. Select the genre type you want to  
select.  
5-40  
íSome models.  
Interior Features  
Audio System  
4. Select the  
,
icon.  
HD Radio  
NOTE  
What is HD Radio™ Technology and  
To change the desired genre, select the icon.  
how does it work?  
HD Radio™ Technology is the digital  
evolution of analog AM/FM radio. Your  
radio product has a special receiver which  
allows it to receive digital broadcasts  
(where available) in addition to the analog  
broadcasts it already receives. Digital  
broadcasts have better sound quality than  
analog broadcasts as digital broadcasts  
provide free, crystal clear audio. For more  
information, and a guide to available radio  
stations and programming, please visit  
www.hdradio.com.  
Ex.)  
89.3 is currently being received. With  
Rock selected as the Genre, the radio  
stations broadcasting Rock are at the  
following frequencies.  
98.3*1, 98.7, 104.3*1, 107.1  
*1 Radio stations with good reception  
The frequency changes as follows each  
time  
is pressed.  
89.3→98.3→104.3→98.3  
NOTE  
l
Only one Genre can be selected.  
Benefits of HD Radio™ Technology  
l
It may not be possible to receive any station  
(Information)  
even if the Genre Seek function is used.  
If a program in the selected genre is not  
broadcast to a region, reception is not  
possible even if the Genre Seek function is  
used.  
l
The song title, artist name, album name  
and genre will appear on the screen when  
available by the radio station.  
(Multicast)  
On the FM radio frequency most digital  
stations have “multiple” or supplemental  
programs on each FM station.  
l
The Genre Seek function searches for genre  
code (program type) which FM analog  
broadcasts transmit.  
specialty  
programs (HD2-HD8) cannot be searched  
because they are not FM analog  
broadcasts.  
Listening to HD Radio™ Technology  
If  
icon turns on by selecting a radio  
l
station which is an  
broadcasting station, the analog broadcast  
is switched to an  
automatically after a few seconds and then  
received.  
If radio stations which are selected by  
scanning using the Genre Seek function are  
broadcasting stations, they are  
changed from analog broadcasts to  
broadcasts after a few seconds  
if the reception conditions are good. The  
genre is displayed after the switch,  
however, the genre for FM analog  
broadcasts may differ.  
broadcast  
If the  
changed to an analog broadcast, press  
down to turn off  
broadcast is stopped and  
.
Multicast channel selection (FM)  
If multi-cast channels are available for an  
broadcast currently being  
received, the multi-cast channel list is  
displayed. Select the desired radio station.  
5-41  
Interior Features  
Audio System  
NOTE  
3. Synchronize the device with iTunes.  
The tagged song can now be purchased  
from the iTunes Store.  
l
If an analog broadcast is received once and  
is received while HD1 is  
selected, the audio unit switches to the  
NOTE  
station automatically.  
l
Both AM and FM  
can be used.  
l
When the  
icon is illuminated, there  
l
Because iTunes Tagging only supports  
purchasing from the iTunes Store, direct  
downloading from the equipped vehicle  
audio is not possible.  
If the available memory for the connected  
device is insufficient, the tag is not sent.  
If an error occurs while the tag is being  
sent, reconnect the device.  
could be a noticeable difference in sound  
quality and volume when a change from  
digital to analog signals occurs. If the  
sound quality and volume become  
l
l
noticeably diminished or cut off, select the  
icon to turn off  
(
icon is  
not illuminated).  
Once an analog broadcast is received when  
HD1 is selected from the Favorite channels,  
l
qOperating the Satellite Radioí  
it is switched to  
automatically.  
If the radio reception conditions are poor,  
or HD is off, switching to  
broadcasts is not possible.  
When an HD specialty channel (HD2 to  
HD8) is selected from the Favorite  
channels, “Signal Lost” is displayed and  
What is satellite radio?  
With over 130 channels, SiriusXM  
Satellite Radio brings you more of what  
you love. Get channels and channels of  
commercial-free music, plus sports, news,  
talk, entertainment and more.  
Commercial-free music from nearly  
every genre ―rock to pop, hip-hop to  
country, jazz, classical and more. Plus live  
performances and artist-dedicated  
channels.  
Live sports Play-by-Play & Expert Talk  
―every NFL game, every NASCAR®  
race, 24/7 sports talk, college sports and  
more.  
Exclusive entertainment, comedy and  
talk ―The biggest names, compelling  
talk, hilarious comedy.  
l
no audio is output until  
is  
received. If the radio reception conditions  
are poor, “Signal Lost” continues to be  
displayed.  
l
If the  
icon is not illuminated,  
information such as song titles of the  
station are received, however,  
the audio output is analog.  
iTunes Tagging (for Apple devices with  
USB use only)  
By tagging a song currently being aired,  
the song can be easily purchased from the  
iTunes Store. Up to 100 tags can be  
stored.  
World-class news plus local traffic and  
weather.  
Sign up for SiriusXM Satellite Radio  
today!  
1. Select the  
icon. The tag is stored in  
the audio unit.  
2. Connect the device via USB. The tag is  
sent to the connected device  
automatically.  
5-42  
íSome models.  
Interior Features  
Audio System  
NOTE  
Displaying the Radio ID (ESN)  
l
To listen to SiriusXM, a prior subscription  
(fee-based) is required.  
When channel 0 is selected, the radio ID  
is displayed. Use the PREVIOUS or  
NEXT channel buttons to select channel  
0.  
l
l
The channels which you can receive depend  
on the package you subscribe to.  
Satellite radio is broadcast as Sirius, XM,  
and SiriusXM in the U.S.A., and Sirius and  
XM in Canada. In this owner’s manual,  
only the name SiriusXM is used.  
l
l
For traffic and weather channels, map  
information is not displayed and only audio  
broadcasts can be received.  
Call 877-447-0011 (U.S.A.)/877-209-0079  
(Canada) to activate. For more  
information, visit www.siriusxm.com  
(U.S.A.)/www.siriusxm.ca (Canada).  
Satellite radio is only available in regions  
providing satellite radio service (some  
areas of the United States and Canada).  
Contact Authorized Mazda Dealer for  
details.  
How to Activate Satellite Radio  
You must call SiriusXM to activate your  
service. Activation is free and takes only a  
few minutes.  
SiriusXM service uses an ID code to  
identify your radio. This code is needed to  
activate SiriusXM service, and report any  
problems.  
Please have the following information  
ready:  
l
Radio ID (8-digit electronic serial no -  
See below for how to find your ESN)  
Valid credit card information (may not  
l
be required at initial sign-up)  
Be sure you are parked outside with a  
clear view of open sky, you will be  
instructed to turn on your radio (in  
SiriusXM mode and tuned to channel 184  
(Sirius)/1 (XM and SiriusXM)).  
Activation typically takes only 2―5  
minutes.  
5-43  
Interior Features  
Audio System  
SiriusXM operation  
Select the  
icon on the home screen to display the Entertainment screen. When  
is  
selected, the following icons are indicated in the bottom part of the center display.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays the channel list of the current category.  
Displays the favorites list. Long-press to store the channel currently being aired.  
Refer to Operating the Radio on page 5-39.  
Indicates that the parental lock function is in use.  
Switching of Lock/Unlock and PIN code setting changes can be performed.  
Plays each channel in the current channel list for 5 seconds.  
Select again to continue receiving the channel.  
Plays the previous channel.  
Plays the next channel.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-36.  
Selection from channel list  
3. Select a desired category.  
Receivable channels can be displayed on  
the channel list screen. You can easily  
select the channel you want to listen from  
the list. Each category can be also  
displayed.  
Parental lock  
If a channel is locked, the channel is  
muted.  
To use the parental lock function, the PIN  
code must be initialized first.  
1. Select the  
channel list.  
icon to display the  
By using the session lock, the parental  
lock can be enabled or disabled during the  
current drive cycle (from when the  
ignition is switched on to switched off).  
When the session lock is on, the parental  
lock is available. When the session lock is  
off, the parental lock is temporarily  
cancelled.  
2. Select a desired channel.  
(Select from category list)  
1. Select the  
channel list.  
icon to display the  
2. Select  
list.  
to display the category  
5-44  
Interior Features  
Audio System  
When canceling the parental lock or  
session lock, or when changing the PIN  
code, PIN code input is required.  
PIN code reset  
If the registered code has been forgotten,  
reset the code to the default [0000] code.  
1. Select the icon.  
2. If the selected channel is locked, input  
the PIN code to cancel the parental  
lock temporarily.  
3. Select  
.
4. Input the default code [0000] using the  
number buttons.  
5. Select  
.
6. Input the new PIN code using the  
number buttons.  
7. Select  
.
5-45  
Interior Features  
Audio System  
qOperating the Compact Disc (CD) Player  
CD eject button  
CD slot  
Type  
Playable data  
l
l
Music data (CD-DA)  
MP3/WMA/AAC file  
Music/MP3/WMA/  
AAC CD player  
NOTE  
If a disc has both music data (CD-DA) and  
MP3/WMA/AAC files, playback of the two or  
three file types differs depending on how the  
disc was recorded.  
Inserting the CD  
Insert the CD into the slot, label-side up.  
The auto-loading mechanism will set the  
CD and begin play.  
NOTE  
There will be a short lapse before play begins  
while the player reads the digital signals on  
the CD.  
Ejecting the CD  
Press the CD eject button ( ) to eject the  
CD.  
5-46  
Interior Features  
Audio System  
Playback  
Select the  
screen. When  
center display.  
icon on the home screen with a CD inserted and display the Entertainment  
is selected, the following icons are indicated in the lower part of the  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
(Music CD)  
Displays the track list of the CD.  
Select the track you want to play.  
(MP3/WMA/AAC CD)  
Displays the top level folder/file list.  
Select the folder you want to select.  
The files in the selected folder are displayed.  
Select the file you want to play.  
(MP3/WMA/ACC CDs only)  
Displays the file list of the folder currently being played.  
Select the song you want to listen to.  
(Music CD)  
Replays the song currently being played repeatedly.  
Select it again to cancel.  
(MP3/WMA/AAC CD)  
Replays the song currently being played repeatedly.  
When selected again, the songs in the folder are played repeatedly.  
Select it again to cancel.  
(Music CD)  
Plays songs on the CD in random order.  
Select it again to cancel.  
(MP3/WMA/AAC CD)  
Plays songs in the folder in random order.  
When selected again, the songs on the CD are played in random order.  
Select it again to cancel.  
(Music CD)  
The beginning of each track on a CD is played to aid in searching for a desired track.  
When selected again, the operation is canceled and the song currently being played  
continues.  
(MP3/WMA/AAC CD)  
The beginning of each track in a folder is played to aid in searching for a desired track.  
When selected again, the operation is canceled and the song currently being played  
continues.  
If the audio is operated during scan-play, the track being scan-played is played normally.  
Then, the audio operation is performed.  
If selected within a few seconds of a song which has started to play, the previous song is  
selected.  
If more than a few seconds have elapsed after a song has begun to play, the song currently  
being played is replayed from the beginning.  
Long-press to fast reverse. It stops when you remove your hand from the icon or the  
commander knob.  
5-47  
Interior Features  
Audio System  
Icon  
Function  
Plays a CD. When selected again, playback is temporarily stopped.  
Advances to the beginning of the next song.  
Long-press to fast forward. It stops when you remove your hand from the icon or the  
commander knob.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-36.  
Example of use (When searching for a  
song from the top level of an MP3/  
WMA/AAC CD)  
q
How to use Auxiliary jack/USB port  
Audio can be heard from the vehicle's  
speakers by connecting a commercially-  
available portable audio unit to the  
auxiliary jack.  
1. Select the  
icon and display the  
folder/file list at the top level.  
Use a commercially-available, non-  
impedance (3.5 ) stereo mini plug cable.  
In addition, audio can be played from the  
vehicle audio device by connecting a USB  
device to the USB port.  
2. When the folder is selected, folders/file  
lists in the folder are displayed.  
3. Select the desired song.  
Refer to AUX/USB mode on page 5-52.  
NOTE  
l
Select  
to move to a folder one level  
higher.  
l
The appearance of the repeat and shuffle  
icons changes depending on the type of  
operation in which the function is used.  
5-48  
Interior Features  
Audio System  
qSettings  
NOTE  
Depending on the grade and specification, the screen display may differ.  
Select the  
icon on the home screen and display the Settings screen.  
Switch the tab and select the setting item you want to change.  
You can customize settings in the setup display as follows:  
Tab  
Item  
Function  
Display  
Refer to Volume/Display/Sound Controls on page 5-36.  
Distance Recognition Support System  
Safety  
Sound  
SBS/SCBS  
Other  
Refer to Personalization Features on page 9-10.  
Refer to Volume/Display/Sound Controls on page 5-36.  
Displays the currently set time is displayed.  
Press to advance the hour/minute, and select  
Adjust Time  
to move the hour/minute back.  
AM/PM can only be selected with the 12-hour  
clock display.  
Synchronizes with GPS when turned on.  
When turned off, the time can be changed from  
“Adjust Time”.  
GPS Sync  
Clock  
Changes the display between 12 and 24-hour  
clock time.  
Time Format  
When it's not synchronized with GPS, select the  
region you want to specify.  
Time Zone Select  
Turns the daylight saving time setting on/off.  
When ON, the time advances 1 hour. When  
OFF, it returns to normal time.  
Daylight Savings Time  
Rain Sensing Wiper  
Door Locks  
Other  
Vehicle  
Devices  
Refer to Personalization Features on page 9-10.  
Refer to Bluetooth® Preparation (Type B) on  
page 5-86.  
Bluetooth®  
5-49  
Interior Features  
Audio System  
Tab  
Item  
Function  
Turns button explanations ON/OFF.  
Changes the language.  
Tool Tips  
Language  
Changes the setting between Fahrenheit and  
Celsius.  
Temperature  
Changes the setting between miles and  
kilometers.  
Distance  
Used to update Gracenote®. Gracenote is used  
with USB Audio, and provides:  
1. Supplemental music information  
(Such as song name, artist name)  
2. Voice recognition assistance for Play Artist  
and Play Album  
Music Database Update  
System  
Gracenote can be downloaded from the Mazda  
Hands Free Website.  
Refer to Gracenote Database (Type B) on page  
5-66.  
Memory and settings are initialized to the  
factory settings.  
The initialization launches by selecting the  
button.  
Restore All Factory Settings  
Agreements and  
Disclaimers  
Verify the disclaimer and agree.  
About  
Can verify the current audio unit OS version  
and Gracenote Database version.  
Version Information  
Select the  
display the Applications screen. The  
following information can be verified.  
icon on the home screen to  
qApplications  
NOTE  
Depending on the grade and specification, the  
screen display may differ.  
Top screen  
Item  
Function  
HD  
Radio™  
Traffic Map  
―
―
Fuel  
Economy  
Monitor  
Refer to Fuel  
Economy Monitor  
on page 4-84.  
Fuel Consumption  
Settings  
Refer to  
Scheduled  
Tire Rotation  
Oil Change  
Maintenance  
Monitor on page  
6-20.  
Maintenance  
Refer to When  
Warnings currently Warning/Indicator  
Warning  
Guidance  
active can be  
verified.  
Lights  
Illuminate/Flash  
on page 7-23.  
5-50  
Interior Features  
Audio System  
qSeek Switch  
Audio Control Switch  
Operation  
Without Bluetooth® Hands-Free  
AM/FM radio  
Press the seek switch (  
switches to the next/previous stored  
station in the order that it was stored.  
,
). The radio  
Press and hold the seek switch (  
,
)
to seek all usable stations at a higher or  
lower frequency whether programmed or  
not.  
Radio stations which have been  
previously stored in the auto memory  
tuning (Type A)/favorite radio (Type B)  
can be called up by pressing the seek  
switch (  
,
) while any radio station  
stored in the auto memory tuning (Type  
A)/favorite radio (Type B) is being  
received. Radio stations can be called up  
in the order they were stored with each  
With Bluetooth® Hands-Free  
press of the switch (  
,
).  
USB Audio/Bluetooth® Audio/CD  
Press the seek switch ( ) to skip forward  
to the beginning of the next track.  
Press the seek switch ( ) within a few  
seconds after playback begins to track  
down to the beginning of the previous  
track.  
qAdjusting the Volume  
To increase the volume, press up the  
volume switch ( ).  
Press the seek switch ( ) after a few  
seconds have elapsed to start playback  
from the beginning of the current track.  
To decrease the volume, press down the  
volume switch ( ).  
Press and hold the seek switch (  
,
)
to continuously switch the tracks up or  
down.  
5-51  
Interior Features  
Audio System  
Pandora®/Aha™/Stitcher™ Radio  
(Type B)  
AUX/USB mode  
Audio can be heard from the vehicle's  
speakers by connecting a commercially-  
available portable audio unit to the  
auxiliary jack.  
A commercially-available, non-impedance  
(3.5 ) stereo mini plug cable is required.  
Contact an Authorized Mazda Dealer for  
details.  
Press the seek switch ( ) to skip forward  
to the beginning of the next track.  
Press and hold the seek switch ( ) to  
evaluate the playback of the current song  
as “Like”.  
Press and hold the seek switch ( ) to  
evaluate the playback of the current song  
as “Dislike”.  
In addition, audio can be played from the  
vehicle audio device by connecting a USB  
device to the USB port.  
qMute Switchí  
Press the mute switch ( ) once to mute  
audio, press it again to resume audio  
output.  
NOTE  
(Type B)  
The SD card slot is for the navigation system.  
For vehicles with the navigation system, the  
SD card (Mazda genuine) with stored map  
data is inserted into the SD card slot and used.  
NOTE  
If the ignition is switched off with the audio  
muted, the mute will be canceled. Therefore,  
when the engine is restarted, the audio is not  
muted. To mute the audio again, press the mute  
switch ( ).  
Type A  
Auxiliary jack/USB port  
5-52  
íSome models.  
Interior Features  
Audio System  
Type B  
CAUTION  
Auxiliary jack  
Depending on the portable audio  
device, noise may occur when the  
device is connected to the vehicle  
accessory socket. (If noise occurs, do  
not use the accessory socket.)  
NOTE  
l
This mode may not be usable depending on  
the portable audio device to be connected.  
Before using the auxiliary jack/USB port,  
refer to the instruction manual for the  
portable audio device.  
l
USB port  
How to use AUX mode (Type  
A) ......................................... page 5-54  
How to use USB mode (Type  
A) ......................................... page 5-56  
How to use iPod mode (Type  
A) ......................................... page 5-60  
How to use AUX mode (Type  
B) ......................................... page 5-63  
How to use USB mode (Type  
B) ......................................... page 5-63  
l
Use a commercially-available, non-  
impedance (3.5 ) stereo mini plug for  
connecting the portable audio unit to the  
auxiliary jack. Before using the auxiliary  
jack, read the manufacturer's instructions  
for connecting a portable audio unit to the  
auxiliary jack.  
To prevent discharging of the battery, do  
not use the auxiliary input for long periods  
with the engine off or idling.  
When connecting a device to the auxiliary  
jack or USB port, noise may occur  
depending on the connected device. If the  
device is connected to the vehicle's  
accessory socket, the noise can be reduced  
by unplugging it from the accessory socket.  
l
l
WARNING  
Do not adjust the portable audio unit  
or a similar product while driving the  
vehicle:  
Adjusting the portable audio unit or  
a similar product while driving the  
vehicle is dangerous as it could  
distract your attention from the  
vehicle operation which could lead to  
a serious accident. Always adjust the  
portable audio unit or a similar  
product while the vehicle is stopped.  
5-53  
Interior Features  
Audio System  
qHow to connect USB port/  
WARNING  
Auxiliary jack  
Do not allow the connection plug cord  
to get tangled with the shift lever:  
Allowing the plug cord to become  
tangled with the shift lever is  
Type A  
USB port Auxiliary jack  
dangerous as it could interfere with  
driving, resulting in an accident.  
CAUTION  
Do not place objects or apply force to  
the auxiliary jack/USB port with the  
plug connected.  
NOTE  
l
Insert the plug into the auxiliary jack/USB  
Type B  
port securely.  
l
Insert or pull out the plug with the plug  
USB port Auxiliary jack  
perpendicular to the auxiliary jack/USB  
port hole.  
l
Insert or remove the plug by holding its  
base.  
qHow to use AUX mode (Type A)  
1. Switch the ignition to ACC or ON.  
2. Press the power/volume dial to turn the  
audio system on.  
3. Press the USB/AUX button ( ) of the  
audio unit to change to the AUX mode.  
Connecting a device  
1. If there is a cover on the AUX jack or  
USB port, remove the cover.  
2. Connect the connector on the device to  
the USB port.  
Connecting with a connector cable  
1. If there is a cover on the AUX jack or  
USB port, remove the cover.  
2. Connect the device plug/connector  
cable to the auxiliary jack/USB port.  
5-54  
Interior Features  
Audio System  
NOTE  
l
When the device is not connected to the  
auxiliary jack, the mode does not switch to  
the AUX mode.  
l
l
Adjust the audio volume using the portable  
audio device or audio unit.  
Audio adjustments other than audio volume  
can only be done using the portable audio  
device.  
l
If the connection plug is pulled out from the  
auxiliary jack while in AUX mode, noise  
may occur.  
5-55  
Interior Features  
Audio System  
qHow to use USB mode (Type A)  
Random button  
Repeat button  
Play/Pause button  
Audio display  
Track up/Fast-forward button  
Track down/Reverse button  
Folder up button  
Folder down button  
File dial  
USB/AUX button  
Text button  
Scan button  
Type  
USB mode  
Playable data  
MP3/WMA/AAC file  
Pause  
To stop playback, press the play/pause  
button (5).  
Press the button again to resume  
playback.  
This unit does not support a USB 3.0  
device. In addition, other devices may not  
be supported depending on the model or  
OS version.  
Fast-forward/Reverse  
Playback  
Press and hold the fast-forward button  
(
) to advance through a track at high  
1. Switch the ignition to ACC or ON.  
speed.  
2. Press the power/volume dial to turn the  
audio system on.  
Press and hold the reverse button ( ) to  
reverse through a track at high speed.  
3. Press the USB/AUX button ( ) to  
switch to the USB mode and start  
playback.  
Track search  
Press the track up button ( ) or turn the  
file dial clockwise once to skip forward to  
the beginning of the next track.  
Press the track down button ( ) or turn  
the file dial counterclockwise within a few  
seconds after playback begins to track  
down to the beginning of the previous  
track.  
Press the track down button ( ) or turn  
the file dial counterclockwise after a few  
seconds have elapsed to start playback  
from the beginning of the current track.  
NOTE  
l
Some devices such as smart phones may  
require a setting change to allow operation  
using a USB connection.  
l
When the USB device is not connected, the  
mode does not switch to USB mode.  
l
When there is no playable data in the USB  
device, “NO CONTENTS” is flashed.  
l
Playback of the USB device is in the order  
of the folder numbers. Folders which have  
no MP3/WMA/AAC files are skipped.  
l
Do not remove the USB device while in the  
USB mode. The data may be damaged.  
5-56  
Interior Features  
Audio System  
Folder search  
Random playback  
To change to the previous folder, press the  
folder down button ( ), or press the  
folder up button ( ) to advance to the  
next folder.  
Tracks are randomly selected and played.  
Folder random  
1. Press the random button (2) during  
playback to play the tracks in the folder  
randomly. “FOLDER RDM” is  
Music Scan  
This function scans the titles in a folder  
currently being played and plays ten  
seconds of each song to aid you in finding  
a song you want to listen to.  
displayed (  
RDM at the bottom of the display  
area).  
is displayed next to  
2. To cancel the random playback, press  
the button again after 3 seconds.  
Press the scan button (  
) during  
playback to start the scan play operation  
(the track number will flash). Press the  
All random  
scan button (  
playback.  
) again to cancel scan  
1. Press the random button (2) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks in the USB device randomly.  
“ALL RDM” is displayed ( is  
displayed next to RDM at the bottom  
of the display area).  
NOTE  
If the unit is left in scan, normal playback will  
resume where scan was selected.  
Repeat playback  
Track repeat  
2. Press the button again to cancel the  
random playback.  
1. Press the repeat button (1) during  
playback to play the current track  
repeatedly. “TRACK RPT” is  
Switching the display  
The information displayed on the audio  
display changes as follows each time the  
displayed ( is displayed next to RPT  
at the bottom of the display area).  
text button (  
playback.  
) is pressed during  
2. To cancel the repeat playback, press the  
button again after 3 seconds.  
Information displayed  
on audio display  
Button  
Folder repeat  
File number/Elapsed time  
1. Press the repeat button (1) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks in the current folder repeatedly.  
Folder number/File  
number  
File name  
Folder name  
Album name  
Song name  
Artist name  
“FOLDER RPT” is displayed (  
is  
displayed next to RPT at the bottom of  
the display area).  
2. Press the button again to cancel the  
repeat playback.  
5-57  
Interior Features  
Audio System  
NOTE  
l
The information (artist name, music name)  
is displayed only when the USB device  
information in the USB device has  
information which can be displayed on the  
screen.  
l
This unit cannot display some characters.  
Characters which cannot be displayed are  
indicated by an asterisk ( ).  
Display scroll  
Only 13 characters can be displayed at  
one time. To display the rest of the  
characters of a long title, press and hold  
the text button (  
scrolls the next 13 characters. Press and  
hold the text button ( ) again after  
). The display  
the last 13 characters have been displayed  
to return to the beginning of the title.  
NOTE  
The number of characters which can be  
displayed is restricted.  
Error Messages  
When the message “CHECK USB” is  
displayed, it indicates that there is some  
error in the USB device. Verify that the  
content recorded in the USB device has  
MP3/WMA/AAC files and re-connect  
correctly. If the message reappears, have  
the unit checked by an Authorized Mazda  
Dealer.  
5-58  
MEMO  
5-59  
Interior Features  
Audio System  
qHow to use iPod mode (Type A)  
Category down button Category up button  
Random button Play/Pause button  
Repeat button  
Audio display  
Track up/Fast-forward button  
Track down/Reverse button  
List up button  
List down button  
File dial  
USB/AUX button  
Text button  
Scan button  
An iPod may not be compatible  
depending on the model or OS version. In  
this case, an error message is displayed.  
Press the button again to resume  
playback.  
Fast-forward/Reverse  
NOTE  
Press and hold the fast-forward button  
The iPod functions on the iPod cannot be  
operated while it is connected to the unit  
because the unit controls the iPod functions.  
(
) to advance through a track at high  
speed.  
Press and hold the reverse button ( ) to  
reverse through a track at high speed.  
Playback  
Track search  
1. Switch the ignition to ACC or ON.  
Press the track up button ( ) or turn the  
file dial clockwise once to skip forward to  
the beginning of the next track.  
2. Press the power/volume dial to turn the  
audio system on.  
Press the track down button ( ) or turn  
the file dial counterclockwise within a few  
seconds (depends on iPod software  
version) after playback begins to track  
down to the beginning of the previous  
track.  
Press the track down button ( ) or turn  
the file dial counterclockwise after a few  
seconds (depends on iPod software  
version) have elapsed to start playback  
from the beginning of the current track.  
3. Press the USB/AUX button ( ) to  
switch to the iPod mode and start  
playback.  
NOTE  
l
When an iPod is not connected, the mode  
does not switch to the iPod mode.  
l
When there is no playable data in the iPod,  
“NO CONTENTS” is flashed.  
l
Do not remove the iPod while in the iPod  
mode. Otherwise, the data could be  
damaged.  
Pause  
To stop playback, press the play/pause  
button (5).  
5-60  
Interior Features  
Audio System  
Category search  
Random playback  
Press the category down button (3) to  
select the previous category and press the  
category up button (4) to select the next  
category.  
Tracks are randomly selected and played.  
Song random  
1. Press the random button (2) during  
playback to play the tracks in the list  
randomly. “SONG RDM” is displayed  
NOTE  
The types of categories include Playlist, Artist,  
Album, Song, Podcast, Genre, Composer, and  
Audio book.  
(
is displayed next to RDM at the  
bottom of the display area).  
2. To cancel the random playback, press  
the button again after 3 seconds.  
List search  
Press the list down button ( ) to select  
the previous list and press the list up  
button ( ) to select the next list.  
Album random  
1. Press the random button (2) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks in the iPod randomly. “ALBUM  
RDM” is displayed ( is displayed  
next to RDM at the bottom of the  
display area).  
NOTE  
When the selected category is Song or Audio  
book, there is no list.  
Music Scan  
This function scans the titles in a list  
currently being played and plays 10  
seconds of each song to aid you in finding  
a song you want to listen to.  
2. Press the button again to cancel the  
random playback.  
NOTE  
Press the scan button (  
) during  
The track number being played randomly is in  
the order of the iPod shuffle table.  
playback to start the scan play operation  
(the track number will flash). Press the  
scan button (  
playback.  
) again to cancel scan  
Switching the display  
The information displayed on the audio  
display changes as follows each time the  
NOTE  
If the unit is left in scan, normal playback will  
resume where scan was selected.  
text button (  
playback.  
) is pressed during  
Information displayed  
on audio display  
Repeat playback  
Button  
1. Press the repeat button (1) during  
playback to play the current track  
repeatedly. “TRACK RPT” is  
File number/Elapsed time  
File number  
Category name  
Artist name  
displayed ( is displayed next to RPT  
at the bottom of the display area).  
Album name  
Song name  
2. Press the button again to cancel the  
repeat playback.  
5-61  
Interior Features  
Audio System  
NOTE  
qError Indications (Type A)  
l
The information (artist name, music name)  
is displayed only when the iPod has  
information which can be displayed.  
If you see an error indication on the  
display, find the cause in the chart. If you  
cannot clear the error indication, take the  
vehicle to an Authorized Mazda Dealer.  
l
This unit cannot display some characters.  
Characters which cannot be displayed are  
indicated by an asterisk ( ).  
Indication  
Cause  
Solution  
Verify that the content  
recorded in the USB  
device has  
MP3/WMA/AAC files  
and re-connect correctly.  
If the error indication  
continues to display,  
consult an Authorized  
Mazda Dealer.  
Display scroll  
13 characters can be displayed at one  
time. To display the rest of the characters  
of a long title, press and hold the text  
button (  
next 13 characters. Press and hold the text  
button ( ) again after the last 13  
USB device  
malfunction  
CHECK USB  
). The display scrolls the  
Verify that the content  
recorded in the iPod has  
playable files and  
characters have been displayed to return  
to the beginning of the title.  
iPod  
re-connect correctly.  
CHECK iPod  
NOTE  
malfunction If the error indication  
continues to display,  
The number of characters which can be  
consult an Authorized  
Mazda Dealer.  
displayed is restricted.  
Error Messages  
If the message “CHECK iPod” is  
displayed, it indicates that there is a  
malfunction in the iPod. Verify that the  
content recorded in the iPod has playable  
files and connect correctly. If the message  
reappears, have the unit checked by an  
Authorized Mazda Dealer.  
5-62  
Interior Features  
Audio System  
qHow to use AUX mode (Type B)  
1. Select the  
icon on the home screen and display the Entertainment screen.  
2. Select  
to switch to the AUX mode. The following icons are displayed in the lower  
part of the center display.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-36.  
NOTE  
l
If a device is not connected to the auxiliary jack, the mode does not switch to the AUX mode.  
Adjust the audio volume using the portable audio device, commander switch, or audio control  
switch.  
l
l
l
Audio adjustments can also be made using the portable audio device's volume setting.  
If the connection plug is pulled out from the auxiliary jack while in AUX mode, noise may occur.  
qHow to use USB mode (Type B)  
Type  
Playable data  
MP3/WMA/AAC/OGG file  
USB mode  
This unit does not support a USB 3.0 device. In addition, other devices may not be  
supported depending on the model or OS version.  
USB devices formatted to FAT32 are supported (USB devices formatted to other formats  
such as NTFS are not supported).  
5-63  
Interior Features  
Audio System  
Playback  
1. Select the  
icon on the home screen and display the Entertainment screen.  
or to switch the USB mode. The following icons are displayed in  
2. Select  
the lower part of the center display.  
Icon  
Function  
Displays the Entertainment menu. Use to switch to a different audio source.  
Category list is displayed.  
Current track list is displayed.  
Select a desired track to play it.  
Plays the current track repeatedly.  
Select it again to play the tracks in the current track list repeatedly.  
When selected again, the function is canceled.  
Tracks in the current track list are played randomly.  
Select it again to cancel.  
Starts playing a track similar to the current track using Gracenote's More Like This™.  
Select the desired song from the category list to cancel More Like This™.  
If selected within a few seconds from the beginning of a song which has started to play, the  
previous song is selected.  
If more than a few seconds have elapsed, the song currently being played is replayed from  
the beginning.  
Long-press to fast reverse. It stops when you remove your hand from the icon or the  
commander knob.  
Track is played. When selected again, playback is temporarily stopped.  
Advances to the beginning of the next song.  
Long-press to fast forward.  
Displays sound settings to adjust audio quality level.  
Refer to Volume/Display/Sound Controls on page 5-36.  
NOTE  
l
To move to the desired location on the track, move the slider indicating the playback time.  
The appearance of the repeat and shuffle icons changes depending on the type of operation in  
which the function is used.  
l
5-64  
Interior Features  
Audio System  
Category list  
Select the  
icon and display the following category list.  
Select a desired category and item.  
Category  
Function  
Playlist  
Displays playlists on the device.  
Displays the artist name list.  
All the tracks or tracks for each album of the selected artist can be played.  
Artist  
Album  
Song  
Displays the album name list.  
All the tracks in the device are displayed.  
Displays the genre list.  
All the tracks or tracks per album or artist in the selected genre can be played.  
Genre  
Displays the audiobook list.  
Chapters can be selected and played.  
Audiobook  
Displays the podcast list.  
Podcast  
Folder  
Episode can be selected and played.  
(Special service for some Apple devices.)  
Displays the folder/file list.  
Example of use (to play all tracks in  
USB device)  
3. Select  
.
All the tracks in the USB device are  
displayed.  
(Method 1)  
4. Select a desired track.  
1. Select  
to display the category list.  
.
The selected track is played. All the  
tracks in the USB device can be played  
by continuing playback.  
2. Select  
All the tracks in the USB device are  
displayed.  
*1 Can be operated using an Android™  
device or USB flash memory.  
3. Select a desired track.  
The selected track is played. All the  
tracks in the USB device can be played  
by continuing playback.  
NOTE  
Only the tracks in the desired folder selected in  
Step 3 are played.  
NOTE  
Only the tracks in the desired category selected  
in Step 2 are played.  
(Method 2)*1  
1. Select  
to display the category list.  
.
2. Select  
All the folders in the USB device are  
displayed.  
5-65  
Interior Features  
Audio System  
qGracenote Database (Type B)  
When a USB device is connected to this unit and the audio is played, the album name,  
artist name, genre and title information are automatically displayed if there is a match in the  
vehicle's database compilation to the music being played. The information stored in this  
device uses database information in the Gracenote music recognition service.  
CAUTION  
For information related to the most recent Gracenote database which can be used  
and how to install it, go to the Mazda Hands Free Website:  
http://www.mazdahandsfree.com  
Introduction  
Music recognition technology and related data are provided by Gracenote®. Gracenote is  
the industry standard in music recognition technology and related content delivery. For  
more information visit www.gracenote.com.  
CD and music-related data from Gracenote, Inc., copyright © 2000 to present Gracenote.  
Gracenote Software, copyright © 2000 to present Gracenote. One or more patents owned  
by Gracenote apply to this product and service. See the Gracenote website for a non-  
exhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, MediaVOCS,  
the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either  
registered trademarks or trademarks of Gracenote in the United States and/or other  
countries.  
5-66  
Interior Features  
Audio System  
Gracenote® End User License Agreement  
This application or device contains software from Gracenote, Inc. of Emeryville, California  
(“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this  
application to perform disc and/or file identification and obtain music-related information,  
including name, artist, track, and title information (“Gracenote Data”) from online servers  
or embedded databases (collectively, “Gracenote Servers”) and to perform other functions.  
You may use Gracenote Data only by means of the intended End-User functions of this  
application or device.  
You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote  
Servers for your own personal non-commercial use only. You agree not to assign, copy,  
transfer or transmit the Gracenote Software or any Gracenote Data to any third party. YOU  
AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE  
SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED  
HEREIN.  
You agree that your non-exclusive license to use the Gracenote Data, the Gracenote  
Software, and Gracenote Servers will terminate if you violate these restrictions. If your  
license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote  
Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the  
Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no  
circumstances will Gracenote become liable for any payment to you for any information  
that you provide. You agree that Gracenote, Inc. may enforce its rights under this  
Agreement against you directly in its own name.  
The Gracenote service uses a unique identifier to track queries for statistical purposes. The  
purpose of a randomly assigned numeric identifier is to allow the Gracenote service to  
count queries without knowing anything about who you are. For more information, see the  
web page for the Gracenote Privacy Policy for the Gracenote service.  
The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.”  
Gracenote makes no representations or warranties, express or implied, regarding the  
accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the  
right to delete data from the Gracenote Servers or to change data categories for any cause  
that Gracenote deems sufficient. No warranty is made that the Gracenote Software or  
Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote  
Servers will be uninterrupted. Gracenote is not obligated to provide you with new  
enhanced or additional data types or categories that Gracenote may provide in the future  
and is free to discontinue its services at any time.  
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND  
NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT  
WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY  
GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY  
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR  
LOST REVENUES.  
© 2000 to present. Gracenote, Inc.  
5-67  
Interior Features  
Audio System  
Updating the database  
The Gracenote media database can be updated using USB device.  
1. Connect a USB device containing the software for updating Gracenote.  
2. Select the  
3. Select the  
icon on the home screen and display the Settings screen.  
tab and select  
. The list of the update package stored in the USB device and the version  
.
4. Select  
are displayed.  
5. Select the package to use the update.  
6. Select  
.
NOTE  
Gracenote can be downloaded from the Mazda Hands-free Website.  
5-68  

Related Topics

Antenna Operating Tips for Audio System Audio Set [Type A (non-touchscreen)] Audio Set [Type B (touchscreen)] Audio Control Switch Operation AUX/USB mode

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot