2013-2016 Mazda Cx-5 SUV Battery Runs Out User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Battery Runs Out for Your Mazda Cx-5 SUV First Generation (2013-2016)

If Trouble Arises  
Battery Runs Out  
Jump-Starting  
Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you  
feel unsure about jump-starting, we strongly recommend that you have a competent service  
technician do the work.  
WARNING  
Follow These Precautions Carefully:  
To ensure safe and correct handling of the battery, read the following precautions  
carefully before using the battery or inspecting it.  
Do not allow the positive ( ) terminal to contact any other metal object that  
could cause sparks:  
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced  
during normal battery operation, could ignite and cause the battery to explode. An  
exploding battery can cause serious burns and injuries. When working near a  
battery, do not allow metal tools to contact the positive ( ) or negative (  
terminal of the battery.  
)
Keep all flames, including cigarettes, and sparks away from open battery  
cells:  
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced  
during normal battery operation, could ignite and cause the battery to explode. An  
exploding battery can cause serious burns and injuries.  
Do not jump-start a frozen battery or one with a low fluid level:  
Jump-starting a frozen battery or one with a low fluid level is dangerous. It may  
rupture or explode, causing serious injury.  
Connect the negative cable to a good ground point away from the battery:  
Connecting the end of the second jumper cable to the negative ( ) terminal of the  
discharged battery is dangerous.  
A spark could cause the gas around the battery to explode and injure someone.  
Route the jumper cables away from parts that will be moving:  
Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous.  
The cable could get caught when the engine starts and cause serious injury.  
7-14  
If Trouble Arises  
Battery Runs Out  
CAUTION  
Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and  
other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in  
series or a 24 V motor generator set).  
Connect cables in numerical order and disconnect in reverse order.  
Jumper cables  
Discharged battery  
Booster battery  
1. Remove the battery cover.  
3. If the booster battery is in another  
vehicle, do not allow both vehicles to  
touch. Turn off the engine of the  
vehicle with the booster battery and all  
unnecessary electrical loads in both  
vehicles.  
4. Connect the jumper cables in the exact  
sequence as in the illustration.  
l
Connect one end of a cable to the  
positive terminal on the discharged  
battery (1).  
Attach the other end to the positive  
l
terminal on the booster battery (2).  
Connect one end of the other cable  
to the negative terminal of the  
booster battery (3).  
Connect the other end to the ground  
2. Make sure the booster battery is 12 V  
and that its negative terminal is  
grounded.  
l
l
point indicated in the illustration  
away from the discharged battery  
(4).  
7-15  
If Trouble Arises  
Battery Runs Out  
5. Start the engine of the booster vehicle  
and run it a few minutes. Then start the  
engine of the other vehicle.  
6. When finished, carefully disconnect the  
cables in the reverse order described in  
the illustration.  
7. If the battery cover has been removed,  
install it in the reverse order of  
removal.  
NOTE  
Verify that the covers are securely installed.  
7-16  

Related Topics

Popular Owner Manuals