Get Windows Guide for Mazda Cx-5 SUV First Generation (2013-2016)

Before Driving

Windows

qOperating the Driver's Side

Power Windows

Power Window

The ignition must be switched ON for the

power windows to operate.

Normal opening/closing

To open the window to the desired

position, lightly hold down the switch.

To close the window to the desired

position, lightly pull up the switch.

WARNING

Make sure the opening is clear before

closing a window:

Closing power windows are

Master control switches

dangerous. A person's hands, head,

or even neck could be caught by the

window and result in serious injury

or even death. This warning applies

especially to children.

Driver's window

Close

Open

Never allow children to play with

power window switches:

Power window switches that are not

locked with the power window lock

switch would allow children to

operate power windows

unintentionally which could result in

serious injury if a child's hands, head

or neck becomes caught by the

window.

Auto-opening/closing

To fully open the window automatically,

press the switch completely down, then

release. The window will fully open

automatically.

To fully close the window automatically,

pull the switch completely up, then

release. The window will fully close

automatically.

CAUTION

To prevent burning out the fuse and

damaging the power window system,

do not open or close more than three

windows at once.

To stop the window partway, pull or press

the switch in the opposite direction and

then release it.

NOTE

A power window may no longer open/close if

you continue to press the switch after fully

opening/closing the power window. If the

power window does not open/close, wait a

moment and then operate the switch again.

3-32

Before Driving

Windows

Power window system initialization

procedure

NOTE

l

Depending on driving conditions, a closing

power window could stop and start opening

when the window feels a shock that is

similar to something blocking it.

In the event the jam-safe function activates

and the power window cannot be closed

automatically, pull and hold the switch and

the window will close.

If the battery was disconnected during

vehicle maintenance, or for other reasons

(such as a switch continues to be operated

after the window is fully open/closed), the

window will not fully open and close

automatically.

The power window auto function will

only resume on the power window that

has been reset.

l

The jam-safe window function does not

operate until the system has been reset.

1 Switch the ignition ON.

Engine-off power window operation

2 Make sure that the power window lock

switch located on the driver's door is

not depressed.

3 Press the switch and fully open the

window.

4 Pull up the switch to fully close the

window and continue holding the

switch for about 2 seconds after the

window fully closed.

The power window can be operated for

about 40 seconds after the ignition is

switched from ON to off with all doors

closed. If any door is opened, the power

window will stop operating.

NOTE

For engine-off operation of the power window,

the switch must be held up firmly throughout

window closure because the auto-closing

function will be inoperable.

Jam-safe window

If a person's hands, head or an object

blocks the window during the auto-

closing operation, the window will stop

and open halfway.

qOperating the Passenger Power

Windows

To open the window to the desired

position, hold down the switch.

To close the window to the desired

position, pull up the switch.

WARNING

Make sure nothing blocks the window

just before it reaches the fully closed

position or while holding up the power

window switch:

Blocking the power window just

before it reaches the fully closed

position or while holding up the

power window switch is dangerous.

In this case, the jam-safe function

cannot prevent the window from

closing all the way. If fingers are

caught, serious injuries could occur.

Close

Open

3-33

Before Driving

Windows

NOTE

Unlocked position (button not

depressed):

l

The power windows may be operated when

the power window lock switch on the

driver's door is in the unlocked position.

All power windows on each door can be

operated.

l

The passenger windows may be opened or

Locked position

closed using the master control switches on

the driver's door.

Master control switches

Driver's window

Unlocked position

Left rear

window

Front

passenger's

window

Right rear window

qPower Window Lock Switch

This feature prevents all power windows

from operating, except the driver's power

window. Keep this switch in the locked

position while children are in the vehicle.

Locked position (button depressed):

Only the driver's power window can be

operated.

3-34

Before Driving

Windows

NOTE

Moonroof^í

Before washing your Mazda, make sure the

moonroof is completely closed so that water

does not get inside the cabin area. After

washing your Mazda or after it rains, wipe the

water off the moonroof before operating it to

avoid water penetration which could cause

rust and water damage to your headliner.

The moonroof can be opened or closed

electrically only when the ignition is

switched ON.

Tilt/Slide switch

qTilt Operation

The rear of the moonroof can be tilted

open to provide more ventilation.

To fully tilt automatically, momentarily

press the tilt/slide switch.

To stop tilting partway, press the tilt/slide

switch.

WARNING

To close to the desired position, press the

tilt/slide switch in the forward direction.

Do not let passengers stand up or

extend part of the body through the

open moonroof while the vehicle is

moving:

Extending the head, arms, or other

parts of the body through the

moonroof is dangerous. The head or

arms could hit something while the

vehicle is moving. This could cause

serious injury or death.

Tilt up

Make sure the opening is clear before

closing the moonroof:

Close (Tilt down)

A closing moonroof is dangerous. The

hands, head, or even neck of a

person, especially a child, could be

caught in it as it closes, causing

serious injury or even death.

qSlide Operation

To fully open automatically, momentarily

press the tilt/slide switch in the backward

direction.

To stop sliding partway, press the tilt/slide

switch.

^íSome models.

3-35

Before Driving

Windows

To close to the desired position, press the

tilt/slide switch in the forward direction.

qSunshade

The sunshade can be opened and closed

by hand.

Open

The sunshade opens automatically when

the moonroof is opened, but must be

closed by hand.

Sunshade

Close

q

Power Moonroof Re-set Procedure

If the battery is disconnected, the

moonroof will not operate. The moonroof

will not operate correctly until it is re-set.

Carry out the following procedure to re-

set the moonroof and resume operation:

CAUTION

Ø The sunshade does not tilt. To

avoid damaging the sunshade, do

not push up on it.

Ø Do not close the sunshade while

the moonroof is opening. Trying to

force the sunshade closed could

damage it.

1. Switch the ignition ON.

2. Press the tilt switch, to partially tilt

open the rear of the moonroof.

3. Repeat Step 2. The rear of the

moonroof tilts open to the fully open

position, then closes a little.

NOTE

If the re-set procedure is performed while the

moonroof is in the slide position (partially

open) it will close before the rear tilt opens.

3-36

Windows for Your Mazda Cx-5 SUV First Generation (2013-2016)

Related Topics

Popular Owner Manuals

Latest Owner Manuals