2004-2011 Mercedes A Class 4 Door Practical advice -> Replacing the wiper blades User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Practical advice -> Replacing the wiper blades for Your Mercedes A Class 4 Door Second Generation (2004-2011)

Practical adviceReplacing the wiper bladesX Position the new wiper blade 1 withReplacing the wiper bladesrecess 6 on lug 5.Windscreen wiper bladesX Fold wiper blade 1 in the direction ofG Risk of accidentarrow 3 onto the wiper arm, until retainingclips 2 engage in bracket 4.The windscreen will not longer be properlywiped if the wiper blades are worn. ThisX Make sure that wiper blade 1 is seatedcould prevent you from observing the , thereby causing an accident.X Fold the wiper arm back onto the wind-Replace the wiper blades twice a year, in spring and autumn.X Press both release clips 2.G Risk of accidentRear window wiper bladeX Fold wiper blade 1 in the direction ofThe wiper arms could start moving andG Risk of injuryarrow 3 away from wiper arm 4.cause an injury if you leave the windscreenThe wiper arm could be set in motion andwipers switched on.X Remove wiper blade 1 in the direction ofinjure you if the windscreen wipers arethe arrow 5.Remove the key from the ignition lockswitched replacing the wiper the key from the ignition lockFittingbefore replacing the wiper blade.! Make sure that you touch only the wiperarm of the windscreen wiper to avoid dam-aging the windscreen wiper Remove the key from the ignition lock.X Fold the wiper arm away from the wind-screen.Z251
Practical advice
Replacing the wiper blades
X Position the new wiper blade 1 with
Replacing the wiper blades
recess 6 on lug 5.
Windscreen wiper blades
X Fold wiper blade 1 in the direction of
G Risk of accident
arrow 3 onto the wiper arm, until retaining
clips 2 engage in bracket 4.
The windscreen will not longer be properly
wiped if the wiper blades are worn. This
X Make sure that wiper blade 1 is seated
could prevent you from observing the traffic
correctly.
conditions, thereby causing an accident.
X Fold the wiper arm back onto the wind-
Replace the wiper blades twice a year, ide-
screen.
ally in spring and autumn.
X Press both release clips 2.
G Risk of accident
Rear window wiper blade
X Fold wiper blade 1 in the direction of
The wiper arms could start moving and
G Risk of injury
arrow 3 away from wiper arm 4.
cause an injury if you leave the windscreen
The wiper arm could be set in motion and
wipers switched on.
X Remove wiper blade 1 in the direction of
injure you if the windscreen wipers are
the arrow 5.
Remove the key from the ignition lock
switched on.
before replacing the wiper blades.
Remove the key from the ignition lock
Fitting
before replacing the wiper blade.
! Make sure that you touch only the wiper
arm of the windscreen wiper to avoid dam-
aging the windscreen wiper blades.
Removing
X Remove the key from the ignition lock.
X Fold the wiper arm away from the wind-
screen.
Z
251
Practical adviceReplacing the wiper bladesRemovingX Turn wiper blade 1 parallel to the wiperarm.X Fold the wiper arm back onto the rear the spraying nozzlesCheck the spraying nozzles setting they have moved, you can readjust themyourself.G Risk of injuryX Swivel spraying nozzles 1 upwards orThe wiper arms could start moving anddownwards.X Remove the key from the ignition an injury if you leave the windscreenX Wipe briefly with washer fluid to test themX Fold the wiper arm away from the rear win-wipers switched on.( Y page 83).dow until it the key from the ignition lockThe spraying nozzles are correctly posi-X Turn wiper blade 1 in the direction ofbefore adjusting the spraying if the stream of water hits the wind-arrow 2 until it is released from thescreen approximately in the on the wiper arm.! Do not use any tools, e.g. a needle, toX Remove wiper blade 1.adjust the spraying nozzles. There is other-wise a risk of damaging the spraying Push the new wiper blade 1 onto the wiperarm until you feel it engage.X Make sure that wiper blade 1 is seatedcorrectly.252
Practical advice
Replacing the wiper blades
Removing
X Turn wiper blade 1 parallel to the wiper
arm.
X Fold the wiper arm back onto the rear win-
dow.
Adjusting the spraying nozzles
Check the spraying nozzles setting regularly.
If they have moved, you can readjust them
yourself.
G Risk of injury
X Swivel spraying nozzles 1 upwards or
The wiper arms could start moving and
downwards.
X Remove the key from the ignition lock.
cause an injury if you leave the windscreen
X Wipe briefly with washer fluid to test them
X Fold the wiper arm away from the rear win-
wipers switched on.
( Y page 83).
dow until it engages.
Remove the key from the ignition lock
The spraying nozzles are correctly posi-
X Turn wiper blade 1 in the direction of
before adjusting the spraying nozzles.
tioned if the stream of water hits the wind-
arrow 2 until it is released from the
screen approximately in the centre.
retainer on the wiper arm.
! Do not use any tools, e.g. a needle, to
X Remove wiper blade 1.
adjust the spraying nozzles. There is other-
wise a risk of damaging the spraying noz-
zles.
Fitting
X Push the new wiper blade 1 onto the wiper
arm until you feel it engage.
X Make sure that wiper blade 1 is seated
correctly.
252

Related Topics

Practical advice
Where will I find...? Display messages Troubleshooting Locking/unlocking in an emergency Changing the batteries Changing the bulbs Flat tyre Battery Jump-starting Towing and tow-starting Fuses

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot