Get Technical data Guide for Mercedes A Class 4 Door Second Generation (2004-2011)

Technical data

Introduction to technical data ......... 274

Genuine Mercedes-Benz parts ......... 274

Vehicle electronics ........................... 275

Vehicle identification plates ............ 276

Engine ................................................ 278

Performance ...................................... 280

Tyres and wheels .............................. 282

Vehicle dimensions .......................... 286

Vehicle weights ................................. 286

Trailer coupling* ............................... 290

Service products and capacities ..... 292

273

Technical data

Genuine Mercedes-Benz parts

Mercedes-Benz parts and conversion parts

Introduction to technical data

Genuine Mercedes-Benz parts

and accessories that have been approved for

your vehicle.

i The technical data was determined in

Mercedes-Benz tests genuine parts and con-

accordance with EU directives. All data

version parts and accessories which have

H Environmental note

applies to the vehicle's standard equip-

been specifically approved for your vehicle for

Daimler also supplies reconditioned

ment. The data may therefore differ for

their reliability, safety and suitability. Despite

assemblies and parts which are of the same

vehicles with optional equipment. You can

ongoing market research, Mercedes-Benz is

quality as new parts. For these, the same

obtain further information from a

unable to evaluate other parts. Therefore,

warranty applies as for new parts.

Mercedes-Benz Service Centre.

Mercedes-Benz accepts no responsibility for

the use of such parts in Mercedes-Benz vehi-

Genuine Mercedes-Benz parts and approved

cles, even if they have been independently or

conversion parts and accessories are availa-

officially approved.

ble from Mercedes-Benz Service Centres.

There, you can also receive advice about tech-

In Germany and some other countries, certain

nical modifications and have the parts pro-

parts are only officially approved for installa-

fessionally fitted.

tion or modification if they comply with legal

requirements. All genuine Mercedes-Benz

Always quote the vehicle identification num-

parts meet this requirement. The use of non-

ber and the engine number when ordering

approved parts may invalidate the vehicle's

genuine parts. For example, you will find

general operating permit. This is the case if:

these numbers on your vehicle's identifica-

tion plates ( Y page 276).

R they cause a change of the vehicle type

from that for which the vehicle's general

operating permit was granted

R other road users could be endangered

R the emission or noise levels are adversely

affected

The use of non-approved parts could affect

your vehicle's operating safety. Therefore,

Mercedes-Benz recommends genuine

274

$Technical dataVehicle electronicsVehicle electronicsRetrofitting electrical and electronicR they do not have an exterior aerialequipmentR the exterior aerial is not a low-reflectionTampering with the engine electron-aerialElectrical and electronic equipment can jeop-icsardise the operating safety of your vehicle. IfR the exterior aerial has been fitted incor-G Risk of accidentequipment of this kind is retrofitted, it mustrectlybe type-approved and bear the e mark. TheOnly have work on the engine electronicsand related components carried out at ae mark may be obtained from the equipmentG Risk of injuryqualified specialist workshop which has themanufacturer or an authorised testing electromagnetic radiation maynecessary specialist knowledge and toolsalso cause damage to your health and the! Damage or consequential damage arisingto carry out the work required. Mercedes-health of others. Using an exterior aerialfrom fitting equipment not approved byBenz recommends that you use atakes into account current scientific dis-Mercedes-Benz is not covered by theMercedes-Benz Service Centre for this pur-cussions relating to the possible health haz-Mercedes-Benz . In particular, work relevant to safetyards that may result from electromagneticIf you wish to install two-way radios in theor on safety-related systems must be , you must obtain formal out at a qualified specialist this reason, only have the exterior aerialMercedes-Benz approves the installation ofThe vehicle's roadworthiness could other-fitted at a qualified specialist workshoptwo-way radios if such equipment is installedwise be has the necessary specialist knowl-professionally and a low-reflection exterioredge and tools to carry out the workaerial is used.! Only have work done on the engine elec-required. Mercedes-Benz recommendsThe transmission output of the two-way radiotronics and its associated parts, such asthat you use a Me$

Technical data

Vehicle electronics

Retrofitting electrical and electronic

R they do not have an exterior aerial

equipment

R the exterior aerial is not a low-reflection

Tampering with the engine electron-

aerial

Electrical and electronic equipment can jeop-

ics

ardise the operating safety of your vehicle. If

R the exterior aerial has been fitted incor-

G Risk of accident

equipment of this kind is retrofitted, it must

rectly

be type-approved and bear the e mark. The

Only have work on the engine electronics

and related components carried out at a

e mark may be obtained from the equipment

G Risk of injury

qualified specialist workshop which has the

manufacturer or an authorised testing centre.

Excessive electromagnetic radiation may

necessary specialist knowledge and tools

also cause damage to your health and the

! Damage or consequential damage arising

to carry out the work required. Mercedes-

health of others. Using an exterior aerial

from fitting equipment not approved by

Benz recommends that you use a

takes into account current scientific dis-

Mercedes-Benz is not covered by the

Mercedes-Benz Service Centre for this pur-

cussions relating to the possible health haz-

Mercedes-Benz warranty.

pose. In particular, work relevant to safety

ards that may result from electromagnetic

If you wish to install two-way radios in the

or on safety-related systems must be car-

fields.

vehicle, you must obtain formal approval.

ried out at a qualified specialist workshop.

For this reason, only have the exterior aerial

Mercedes-Benz approves the installation of

The vehicle's roadworthiness could other-

fitted at a qualified specialist workshop

two-way radios if such equipment is installed

wise be affected.

which has the necessary specialist knowl-

professionally and a low-reflection exterior

edge and tools to carry out the work

aerial is used.

! Only have work done on the engine elec-

required. Mercedes-Benz recommends

The transmission output of the two-way radio

tronics and its associated parts, such as

that you use a Mercedes-Benz Service

must not exceed the maximum transmission

control units, sensors and connector leads,

Centre for this purpose. In particular, work

outputs listed.

carried out at a qualified specialist work-

relevant to safety or on safety-related sys-

shop, e.g. a Mercedes-Benz Service

G Risk of accident

tems must be carried out at a qualified spe-

Centre. Otherwise, vehicle components

Two-way radios may interfere with the vehi-

cialist workshop.

may wear more quickly and your vehicle's

cle electronics and thereby jeopardise the

warranty and operating permit may be inva-

operational safety of the vehicle and your

i Mercedes-Benz recommends the use of

lidated.

own safety if:

an approved exterior aerial. This ensures

optimal reception quality for mobile tele-

275

Technical data

Vehicle identification plates

phones/wireless devices in the vehicle.

Vehicle identification plates

This also ensures that interference

Vehicle identification plate with vehi-

between these devices and the vehicle's

cle identification number (VIN) and

electronics is kept to a minimum. If instal-

paint code number

led, the exterior aerial conducts the elec-

tromagnetic fields transmitted by a mobile

The vehicle identification plate is located at

phone to the exterior of the vehicle.

the bottom of the door frame on the front-

passenger side.

Frequency range

Maximum trans-

mission output

(watts)

Vehicle identification plate (example)

Short wave

100

1 Vehicle identification plate

(< 50 MHz)

2 Vehicle manufacturer

4 m waveband

3 EU type approval number

4 Vehicle identification number (VIN)

2 m waveband

5 Maximum permissible gross vehicle

70 cm waveband

weight

6 Maximum permissible towing weight

25 cm waveband

1 Vehicle identification plate

7 Maximum permissible front axle load

X Open the driver's door.

8 Maximum permissible rear axle load

! If electrical or electronic equipment

You will see vehicle identification plate

9 Paint code number

which does not comply with the above

installation conditions is operated inside

the vehicle, the vehicle's operating permit

may be invalidated (EU Directive

95/54/EC - Automotive EMC directive)

276

Technical data

Vehicle identification plates

X Open the bonnet ( Y page 171).

Vehicle identification number (VIN)

You will see vehicle identification number

In addition to the information on the vehicle

(VIN) 1.

identification plate, the vehicle identification

number (VIN) is also stamped onto the vehicle

body. It is located in the engine compartment

Engine number

below the windscreen frame.

The engine number is stamped on the engine

block (crankcase). More information can be

obtained from any Mercedes-Benz Service

Centre.

1 Vehicle identification number (VIN)

277

Technical data

Engine

A 150

A 170

A 200

A 200 TURBO

A 150 BlueEFFICIENCY

A 170 BlueEFFICIENCY

Rated output

70 kW (95 bhp)

85 kW (116 bhp)

100 kW (136 bhp)

142 kW (193 bhp)

At engine speed

5,200 rpm

5,500 rpm

5,000 rpm

Rated torque

140 Nm

155 Nm

185 Nm

280 Nm

At engine speed

3,500 – 4,000 rpm

1,800 – 4,850 rpm

Number of cylinders

Displacement

1,498 cm 3

1,699 cm 3

2,034 cm 3

Maximum engine

6,300 rpm

6,000 rpm

speed

A 160 CDI

A 180 CDI

A 200 CDI

Rated output

60 kW (82 bhp)

80 kW (109 bhp)

103 kW (140 bhp)

At engine speed

4,200 rpm

Rated torque

250 Nm

180 Nm (200 Nm) 34

300 Nm (280 Nm) 34

At engine speed

1,400 – 2,600 rpm

1,600 – 2,600 rpm

1,600 – 3,000 rpm

Number of cylinders

34 Vehicles with AUTOTRONIC*

* optional

278

Technical data

Engine

A 160 CDI

A 180 CDI

A 200 CDI

Displacement

1,991 cm 3

Maximum engine

4,800 rpm

speed

279

Technical data

Performance

Speeds

Manual transmission

A 150

A 170

A 200

A 200 TURBO

A 150 BlueEFFICIENCY A 170 BlueEFFICIENCY

Maximum speed

175 km/h

188 km/h

200 km/h

228 km/h

Manual transmission

A 160 CDI

A 180 CDI

A 200 CDI

Maximum speed

170 km/h

186 km/h

201 km/h

A 150

A 170

A 200

A 200 TURBO

AUTOTRONIC*

Maximum speed

170 km/h

183 km/h

195 km/h

220 km/h

A 160 CDI

A 180 CDI

A 200 CDI

AUTOTRONIC*

Maximum speed

165 km/h

181 km/h

196 km/h

* optional

280

Technical data

Performance

Acceleration from 0 to 100 km/h

A 150

A 170

A 200

BlueEFFICIENCY

Manual transmission

12.6 seconds

10.9 seconds

9.8 seconds

AUTOTRONIC*

13.5 seconds

–

11.5 seconds

–

9.9 seconds

A 200

A 160 CDI

A 180 CDI

A 200 CDI

TURBO

Manual transmission

7.5 seconds

15 seconds

10.8 seconds

9.5 seconds

AUTOTRONIC*

7.3 seconds

15.3 seconds

11.1 seconds

9.6 seconds

* optional

281

Technical data

Tyres and wheels

can be obtained from any Mercedes-Benz

teristics such as handling, noise levels and

Tyres and wheels

Service Centre.

fuel consumption, etc. may be adversely

Points to remember

affected. In addition, when driving with a

i Vehicles with MOExtended run-flat sys-

load, tyre dimensional variations could

! For safety reasons, Mercedes-Benz rec-

tem are not equipped with the TIREFIT

cause the tyres to come into contact with

ommends that you only use tyres which

kit* 35 .

the bodywork and axle components. This

have been approved specifically for your

could result in damage to the tyres or the

Therefore, it is recommended that you

vehicle by Mercedes-Benz. These tyres are

vehicle.

additionally equip your vehicle with the

specially adapted for use with the control

TIREFIT kit* when fitting tyres that do not

systems, such as ABS or ESP ® , and are

i Further information about tyres and

feature run-flat properties, e.g. winter

marked as follows:

wheels can be obtained from any

tyres.

R MO = Mercedes-Benz Original

Mercedes-Benz Service Centre.

R MOE = Mercedes-Benz Original Exten-

i A TIREFIT kit* is available from any quali-

You will find a table of tyre pressures on the

ded* (with run-flat characteristics)

fied specialist workshop, e.g. a Mercedes-

inside of your vehicle's fuel filler flap. You

Benz Service Centre.

will find further information about tyre pres-

If you use other tyres, Mercedes-Benz can-

sures in the "Operation" section

not accept any responsibility for damage

! If you fit tyres other than those tested and

( Y page 178).

which may occur. Information about tyres

recommended by Mercedes-Benz, charac-

35 Only for certain countries.

* optional

282

Technical data

Tyres and wheels

Tyres

A 150 /

A 200 /

A 200 TURBO

A 150 BlueEFFICIENCY /

A 200 CDI

A 170 /

A 170 BlueEFFICIENCY /

A 160 CDI /

A 160 CDI BlueEFFICIENCY /

A 180 CDI

15"

Both

Summer tyres

185/65 R15 88T

–

axles

Winter tyres

185/65 R15 88T M+S.

Wheels

6J x 15 H2 ET 44

–

16"

Both

Summer tyres

195/55 R16 87T

195/55 R16 87H

195/55 R16 87V

axles

Winter tyres

195/55 R16 87T M+S.

Wheels

6J x 16 H2 ET 46

17"

Both

Summer tyres 36, 37

215/45 R17 87V

axles

Wheels

7J x 17 H2 ET 54

36 Snow chains only permitted as a starting-off aid.

37 Only with sports suspension.

283

Technical data

Tyres and wheels

AMG equipment*

All models

18"

Both axles

Summer tyres 38, 39

215/40 R 18 89W XL

Light-alloy wheels

7J x 18 H2 ET 54

MOExtended tyres*

i Tyres with run-flat characteristics, only in conjunction with light-alloy wheels and tyre pressure loss warning system.

All models 40

16"

Both axles

Winter tyres 41, 42

195/55 R16 87H M+S MOExtended

Light-alloy wheels 43

6J x 16 H2 ET 46

17"

Both axles

Summer tyres 41, 44

215/45 R17 87V MOExtended

Light-alloy wheels 43

7J x 17 H2 ET 54

38 Use of snow chains not permitted.

39 Only with sports suspension.

40 Only with sports suspension.

41 Tyres with run-flat characteristics, only available in conjunction with tyre pressure loss warning system and tyre pressure monitor*.

42 Not available from the factory. You can obtain further information from a specialist workshop, e.g. a Mercedes-Benz Service Centre.

43 Not on steel wheels.

44 Snow chains only permitted as a pull-away aid.

* optional

284

Technical data

Tyres and wheels

Spare wheel*

Your vehicle may be equipped with TIREFIT, a "Minispare" emergency spare wheel* or a spare wheel*, depending on the country, the engine

and the wheels fitted.

i Vehicles with MOExtended tyres (tyres with run-flat characteristics) are not equipped with a TIREFIT kit at the factory.

A 150 /

A 200 /

A 200 TURBO

A 150 BlueEFFICIENCY /

A 200 CDI

A 170 /

A 170 BlueEFFICIENCY /

A 160 CDI /

A 160 CDI BlueEFFICIENCY /

A 180 CDI

15"

Remove the spare

Summer tyres

185/65 R15 88T

–

wheel*

Steel spare

6J x 15 H2 ET 44

–

wheel

16"

Remove the spare

Summer tyres

–

195/55 R16 87H

195/55 R16 87V

wheel*

Steel spare

–

6J x 16 H2 ET 46

wheel

16"

"Minispare " emergency Tyres

T 125/90 R16 98M

spare wheel* 45

Tyre pressure

4.2 bar

Wheels

3.5B x 16 H2 ET 32

45 Use of snow chains not possible.

* optional

285

Technical data

Vehicle weights

Vehicle dimensions

A 150

A 170

A 200

BlueEFFICIENCY

Vehicle length (ECE)

3,883 mm

Vehicle width including exte-

2,040 mm

rior mirrors

Vehicle height

1,593 mm

1,595 mm

Wheelbase

2,568 mm

A 200 TURBO

A 160 CDI

A 180 CDI

A 200 CDI

Vehicle length (ECE)

3,883 mm

Vehicle width including exte-

2,040 mm

rior mirrors

Vehicle height

1,595 mm

1,593 mm

1,595 mm

Wheelbase

2,568 mm

Vehicle weights

The unladen weight includes the driver (68 kg), luggage (7 kg) and all fluids (fuel tank 90% full). Items of optional equipment increase the

unladen weight and reduce the maximum payload. You will find more specific weight information on the vehicle identification plate

( Y page 276).

286

Technical data

Vehicle weights

A 150

A 170

A 200

BlueEFFICIENCY

Unladen weight

5-door vehi-

1,225 kg

1,245 kg

1,240 kg

1,260 kg

1,270 kg

(in accordance

cle

with EC directive)

3-door vehi-

1,195 kg

1,215 kg

1,210 kg

1,230 kg

1,240 kg

cle

Maximum per-

5-door vehi-

1,740 kg

1,770 kg

1,765 kg

missible gross

cle

vehicle weight

3-door vehi-

1,740 kg

1,770 kg

1,765 kg

cle

Maximum per-

5-door vehi-

860 kg

885 kg

890 kg

missible front

cle

axle load

3-door vehi-

860 kg

885 kg

890 kg

cle

Maximum per-

5-door vehi-

880 kg

885 kg

875 kg

missible rear axle cle

load

3-door vehi-

880 kg

885 kg

875 kg

cle

Towing a trailer

5-door vehi-

920 kg

cle

3-door vehi-

920 kg

cle

287

Technical data

Vehicle weights

A 150

A 170

A 200

BlueEFFICIENCY

Maximum roof

50 kg

load

Maximum lug-

100 kg

gage compart-

ment load

A 200 TURBO

A 160 CDI

A 180 CDI

A 200 CDI

Unladen weight

5-door vehi-

1,305 kg

1,325 kg

1,345 kg

1365 kg

(in accordance

cle

with EC directive)

3-door vehi-

1,275 kg

1,300 kg

1,320 kg

1,340 kg

cle

Maximum per-

5-door vehi-

1,835 kg

1,830 kg

1,880 kg

missible gross

cle

vehicle weight

3-door vehi-

1,835 kg

1,830 kg

1,880 kg

cle

Maximum per-

5-door vehi-

945 kg

935 kg

980 kg

missible front

cle

axle load

3-door vehi-

945 kg

935 kg

980 kg

cle

288

Technical data

Vehicle weights

A 200 TURBO

A 160 CDI

A 180 CDI

A 200 CDI

Maximum per-

5-door vehi-

890 kg

900 kg

895 kg

900 kg

missible rear

cle

axle load

3-door vehi-

890 kg

900 kg

895 kg

900 kg

cle

Towing a trailer

5-door vehi-

935 kg

cle

3-door vehi-

935 kg

cle

Maximum roof

50 kg

load

Maximum lug-

100 kg

gage compart-

ment load

289

Technical data

Trailer coupling*

If you have a trailer tow hitch retrofitted,

For trailer couplings fitted at the factory, the

Trailer coupling*

observe the anchorage points on the chas-

overhang dimension is 749 mm.

Mounting dimensions

sis frame.

G Risk of accident

Only have a trailer tow hitch retrofitted at a

qualified specialist workshop which has the

necessary specialist knowledge and tools

to carry out the work required. Mercedes-

Benz recommends that you use a

Mercedes-Benz Service Centre for this pur-

pose. In particular, work relevant to safety

or on safety-related systems must be car-

ried out at a qualified specialist workshop.

! If you have a trailer tow hitch retrofitted,

changes to the cooling system may be nec-

essary, depending on the vehicle type.

Anchorage points for the trailer coupling

1 Anchorage points

2 Overhang dimension

3 Rear axle centre line

* optional

290

Technical data

Trailer coupling*

Trailer loads

A 150

A 170

A 200

A 160 CDI

A 180 CDI

A 150

A 170

A 200 TURBO

A 200 CDI

BlueEfficiency

Permissible trailer load, braked 46

1,000 kg

1,300 kg

1,500 kg

1,000 kg

1,500 kg

Permissible trailer load, unbraked

595 kg

645 kg

Maximum drawbar noseweight 47

75 kg

46 At a minimum gradient-climbing capability of 12 % from a standstill.

47 The drawbar noseweight is not included in the trailer load.

* optional

291

$Technical dataService products and capacitiesOther designations or recommendations thatService products and capacitiesFuelsrelate to a level of quality or a specification inG Risk of explosionNotes on service products and capaci-accordance with an MB Approval have nottiesnecessarily been approved by Mercedes-Fuel is highly flammable. Fire, naked smoking are therefore prohibited whenService products are:handling can obtain further information from anyR fuels (e.g. petrol, diesel)Mercedes-Benz Service refuelling, always turn off theR lubricants (e.g. engine oil, transmission oil)engine.G Risk of injuryR coolantWhen handling, storing and disposing ofG Risk of injuryR brake fluidany service products, please observe theDo not allow fuel to come into contact withrelevant regulations, as you could other-R windscreen washer fluidskin or endanger yourself and -Benz recommends that you onlyAllowing fuels to come into direct contactKeep service products away from those products which have been testedwith your skin or inhaling fuel vapours isTo protect your health, do not allow serviceand specially approved by Mercedes-Benz fordamaging to your to come into contact with youryour vehicle and are listed in the Mercedes-eyes or open wounds. See a doctor imme-Benz Owner's Manual in the relevant chapterTank capacitydiately if any service product is :Total capacity54 lR parts and service products are matchedH Environmental noteR damage caused by the use of non-approvedOf which reserveApproximately 6 lDispose of service products in an environ-service products is not covered by the war-fuelmentally-responsible can recognise service products approved! Do not use petrol to refuel vehicles with aby Mercedes-Benz by the following inscrip-diesel engine. Do not use diesel to refueltion on the containers:vehicles with a petrol engine. Never mixR MB-Freigabe (e.g. MB-F$

Technical data

Service products and capacities

Other designations or recommendations that

Service products and capacities

Fuels

relate to a level of quality or a specification in

G Risk of explosion

Notes on service products and capaci-

accordance with an MB Approval have not

ties

necessarily been approved by Mercedes-

Fuel is highly flammable. Fire, naked flames

Benz.

and smoking are therefore prohibited when

Service products are:

handling fuels.

You can obtain further information from any

R fuels (e.g. petrol, diesel)

Mercedes-Benz Service Centre.

Before refuelling, always turn off the

R lubricants (e.g. engine oil, transmission oil)

engine.

G Risk of injury

R coolant

When handling, storing and disposing of

G Risk of injury

R brake fluid

any service products, please observe the

Do not allow fuel to come into contact with

relevant regulations, as you could other-

R windscreen washer fluid

skin or clothing.

wise endanger yourself and others.

Mercedes-Benz recommends that you only

Allowing fuels to come into direct contact

Keep service products away from children.

use those products which have been tested

with your skin or inhaling fuel vapours is

To protect your health, do not allow service

and specially approved by Mercedes-Benz for

damaging to your health.

products to come into contact with your

your vehicle and are listed in the Mercedes-

eyes or open wounds. See a doctor imme-

Benz Owner's Manual in the relevant chapter

Tank capacity

diately if any service product is swallowed.

since:

Total capacity

54 l

R parts and service products are matched

H Environmental note

R damage caused by the use of non-approved

Of which reserve

Approximately 6 l

Dispose of service products in an environ-

service products is not covered by the war-

fuel

mentally-responsible manner.

ranty

You can recognise service products approved

! Do not use petrol to refuel vehicles with a

by Mercedes-Benz by the following inscrip-

diesel engine. Do not use diesel to refuel

tion on the containers:

vehicles with a petrol engine. Never mix

R MB-Freigabe (e.g. MB-Freigabe 229.51)

diesel with petrol. Even small amounts of

R MB Approval (e.g. MB Approval 229.51)

the wrong fuel result in damage to the

injection system. Damage resulting from

292

Technical data

Service products and capacities

adding the wrong fuel is not covered by the

The consumption figures have been deter-

H Environmental note

warranty.

mined according to EU Directive

CO 2 (carbon dioxide) is the gas which sci-

RL 80 / 1268 / EEC.

More information about refuelling and fuels

entists believe to be principally responsible

can be found on ( Y page 168).

i Only for certain countries: the respective

for global warming (the greenhouse effect).

current consumption and emission values

Your vehicle's CO 2 emissions are directly

of your vehicle can be found in the COC

related to fuel consumption and therefore

Introduction to fuel consumption

papers (EC-CERTIFICATE OF CONFORM-

depend on:

The vehicle will use more fuel than usual in

ITY). These documents are supplied when

R efficient use of the fuel by the engine

the following situations:

the vehicle is delivered.

R driving style

R at very low temperatures

! Do not use any special additives, as they

R other non-technical factors, such as envi-

R in urban traffic

can cause malfunctions and engine dam-

ronmental influences or road conditions

R on short trips

age. Damage resulting from the use of such

You can minimise your vehicle's CO 2 emis-

additives is not covered by the Mercedes-

R when towing a trailer

sions by driving carefully and having it serv-

Benz warranty.

R in mountainous terrain

iced regularly.

293

Technical data

Service products and capacities

Fuel consumption

The consumption figures have been determined according to applicable EU Directives and do not refer to one specific vehicle. Deviations

from these values may occur under normal operating conditions.

Manual transmission

A 150

A 170

BlueEFFICIENCY

Urban

7.9 – 8.4 l/100 km

7.4 – 7.8 l/100 km

8.6 – 8.7 l/100 km

8.0 – 8.4 l/100 km

Extra-urban

5.4 – 5.7 l/100 km

5.1 – 5.5 l/100 km

5.5 – 5.8 l/100 km

5.1 – 5.5 l/100 km

Overall (NEDC)

6.2 – 6.7 l/100 km

5.8 – 6.2 l/100 km

6.6 – 6.8 l/100 km

6.1 – 6.5 l/100 km

CO 2 emissions

148 – 159 g/km

139 – 149 g/km

157 – 163 g/km

146 – 154 g/km

Manual transmission

A 200

A 200 TURBO

Urban

9.6 - 9.6 l/100 km

10.5 – 10.7 l/100 km

Extra-urban

5.9 – 6.1 l/100 km

6.4 – 6.6 l/100 km

Overall (NEDC)

7.2 – 7.4 l/100 km

7.9 – 8.1 l/100 km

CO 2 emissions

172 – 176 g/km

187 – 192 g/km

A 150

A 170

A 200

A 200 TURBO

AUTOTRONIC*

Urban

8.5 – 8.7 l/100 km

8.6 – 9.0 l/100 km

9.6 - 9.6 l/100 km

10.2 – 10.3 l/100 km

Extra-urban

5.5 – 6.0 l/100 km

5.9 – 6.1 l/100 km

6.5 – 6.6 l/100 km

294

Technical data

Service products and capacities

A 150

A 170

A 200

A 200 TURBO

AUTOTRONIC*

Overall (NEDC)

6.6 – 7.0 l/100 km

6.6 – 7.1 l/100 km

7.2 – 7.4 l/100 km

7.9 – 8.1 l/100 km

CO 2 emissions

157 – 166 g/km

157 – 169 g/km

172 – 176 g/km

187 – 192 g/km

Manual transmission

A 160 CDI

A 180 CDI

A 200 CDI

Urban

6.2 – 6.5 l/100 km

6.4 – 6.5 l/100 km

6.8 – 6.9 l/100 km

Extra-urban

4.3 – 4.5 l/100 km

4.2 – 4.4 l/100 km

4.5 – 4.6 l/100 km

Overall (NEDC)

4.9 – 5.2 l/100 km

5.0 – 5.2 l/100 km

5.3 – 5.4 l/100 km

CO 2 emissions

128 – 137 g/km

134 – 138 g/km

138 – 140 g/km

A 160 CDI

A 180 CDI

A 200 CDI

AUTOTRONIC*

Urban

7.0 – 7.6 l/100 km

7.1 – 7.9 l/100 km

Extra-urban

4.4 – 4.9 l/100 km

4.9 – 5.0 l/100 km

Overall (NEDC)

5.4 – 5.8 l/100 km

5.7 – 6.0 l/100 km

CO 2 emissions

142 – 154 g/km

149 – 159 g/km

* optional

295

Technical data

Service products and capacities

Engine oil

A list of engine oils tested and approved in accordance with the Mercedes-Benz Specifications for Service Products is available from any

Mercedes-Benz Service Centre. Engine oils which have been approved by Mercedes-Benz have the MB Sheet number indicated on the oil

container. The table shows which MB Sheet Number applies to which engine:

A 150

A 170

A 200

A 200 TURBO

A 150 BlueEFFICIENCY

A 170 BlueEFFICIENCY

MB Sheet Number

229.3/229.31

229.5/229.51

With a diesel particulate filter

A 160 CDI

A 180 CDI

A 200 CDI

A 160 CDI BlueFFICIENCY

MB Sheet Number

228.51/229.31/229.51

Without a diesel particle fil-

A 160 CDI

A 180 CDI

A 200 CDI

ter 48

MB Sheet Number

228.3/228.5/228.51

229.3/229.31/229.5/229.51

i In the event that the:

is not available, you can use another min-

! Do not use lubricant additives as they can

eral or synthetic engine oil which has been

lead to increased wear and damage to

R engine oil brand

approved by Mercedes-Benz.

mechanical assemblies. The use of lubri-

R grade (MB Sheet number)

cant additives will result in a restriction of

Mixing oils reduces the benefits of high-

R SAE classification (viscosity)

your warranty.

grade engine oil.

48 Only for certain countries.

296

Technical data

Service products and capacities

! Engine oils for vehicles without a diesel

in vehicles with a diesel particle filter if the

then have an oil change carried out as soon

particle filter may also be used temporarily

engine oil listed is not available. You must

as possible.

Capacities

The following values refer to an oil change including the oil filter.

Engine with oil filter

A 150

A 170

A 200

A 200 TURBO

A 150 BlueFFICIENCY

A 170 BlueFFICIENCY

Replacement amount

5.0 l

Engine with oil filter

A 160 CDI

A 180 CDI

A 200 CDI

A 160 CDI BlueFFICIENCY

Replacement amount

5.8 l

5.4 l

Coolant

! Only top up with coolant that has been

! Always use a suitable coolant mixture,

premixed with the desired antifreeze pro-

even in countries where high temperatures

The coolant is a mixture of water and anti-

tection. You could otherwise damage the

prevail.

freeze/corrosion inhibitor. It performs the

engine.

Otherwise, the cooling system will not be

following tasks:

More information on coolant and refilling

sufficiently protected from corrosion, and

R anti-corrosion protection

can be found in the Mercedes-Benz Speci-

the boiling point will be too low.

R antifreeze protection

fications for Service Products, sheet no.

If antifreeze/corrosion inhibitor is present in

310.1 and is available from any Mercedes-

R raising the boiling point

the correct concentration, the boiling point of

Benz Service Centre.

the coolant will be around 130 °C.

i When the vehicle is first delivered, it is

The antifreeze/corrosion inhibitor concentra-

topped up with a coolant that will ensure

tion in the cooling system should:

adequate antifreeze and corrosion protec-

tion.

297

Technical data

Service products and capacities

R be at least 50%. This will protect the cooling

system against freezing down to around –

37 °C.

R not exceed 55% concentration (antifreeze

protection down to –45 °C); otherwise,

heat will not be effectively dissipated.

If the vehicle has lost coolant, top it up with

equal amounts of water and antifreeze/cor-

rosion inhibitor. Mercedes-Benz recom-

mends an antifreeze/corrosion inhibitor

which has been approved for Mercedes-Benz.

! The cooling system contains a filling

which must be renewed after 15 years, or

after 250, 000 km at the latest.

The warranty is only valid if you top up with

an antifreeze/corrosion inhibitor which

has been approved by Mercedes-Benz, and

observe the recommended mixing ratios.

298

Technical data

Service products and capacities

Capacities

The following values indicate the total cooling system capacities.

A 150

A 170

Manual trans-

BlueEFFICIENCY

Manual trans-

BlueEFFICIENCY

AUTOTRONIC*

mission

Coolant

6.3 l

6.5 l

6.3 l

6.6 l

Amount of antifreeze/corrosion inhibitor required for antifreeze protection

Down to –37 °C

3.2 l

3.25 l

3.2 l

3.3 l

(approx. 50%)

Down to –45 °C

3.5 l

3.6 l

3.5 l

3.65 l

(approx. 55%)

A 200

A 160 CDI

A 200 CDI

TURBO

Manual transmission

AUTOTRONIC*

A 180 CDI

Coolant

6.6 l

8.5 l

8.4 l

8.0 l

9.7 l

Amount of antifreeze/corrosion inhibitor required for antifreeze protection

Down to –37 °C

3.3 l

4.25 l

4.2 l

4.0 l

4.85 l

(approx. 50%)

Down to –45 °C

3.65 l

4.7 l

4.6 l

4.4 l

5.35 l

(approx. 55%)

* optional

299

$Technical dataService products and capacitiesBrake fluidWindscreen washer systemOver a period of time, the brake fluid absorbsG Risk of firemoisture from the air; this lowers its boilingWindscreen washer concentrate is . Fire, naked flames and smokingG Risk of accidentare prohibited when windscreen washerconcentrate is being the boiling point of the brake fluid is toolow, vapour pockets may form in the brakeThe washer fluid reservoir holds approxi-system when the brakes are applied hardmately 4.5 litres.(e.g. when driving downhill). This wouldThe headlamp cleaning system* and theimpair braking washer system are both suppliedHave the brake fluid renewed every twofrom the washer fluid with a brake fluid that has beenFurther information on windshield washerapproved by Mercedes-Benz and have thisfluid and the mixing ratio can be found onconfirmed in the Service Booklet.( Y page 175).i There is usually a notice in the enginecompartment to remind you when the nextbrake fluid change is due.* optional300$

Technical data

Service products and capacities

Brake fluid

Windscreen washer system

Over a period of time, the brake fluid absorbs

G Risk of fire

moisture from the air; this lowers its boiling

Windscreen washer concentrate is highly

point.

flammable. Fire, naked flames and smoking

G Risk of accident

are prohibited when windscreen washer

concentrate is being handled.

If the boiling point of the brake fluid is too

low, vapour pockets may form in the brake

The washer fluid reservoir holds approxi-

system when the brakes are applied hard

mately 4.5 litres.

(e.g. when driving downhill). This would

The headlamp cleaning system* and the

impair braking efficiency.

windscreen washer system are both supplied

Have the brake fluid renewed every two

from the washer fluid reservoir.

years with a brake fluid that has been

Further information on windshield washer

approved by Mercedes-Benz and have this

fluid and the mixing ratio can be found on

confirmed in the Service Booklet.

( Y page 175).

i There is usually a notice in the engine

compartment to remind you when the next

brake fluid change is due.

* optional

300

Technical data for Your Mercedes A Class 4 Door Second Generation (2004-2011)

Related Topics

Popular Owner Manuals

Latest Owner Manuals