Get On-board computer/Displays -> Menus and submenus Guide for Mercedes A Class 4 Door Third Generation (2012-2017)

Menus and submenus

241

transmission (shifting manually)

(Y page 177)

Multifunction display

R

j Active Parking Assist (Y page 212)

¯ Cruise control (Y page 191)

È SPEEDTRONIC (Y page 194)

_ Adaptive Highbeam Assist

(Y page 123)

R

è ECO start/stop function

(Y page 162)

R

ë HOLD function (Y page 204)

120 km/h! Maximum permissible speed

exceeded (only for certain countries)

Menus and submenus

Menu overview

:

Permanent display: outside temperature

or speed (Y page 251)

Time

Text field

Menu bar

Drive program (Y page 170)

Transmission position (Y page 172)

Using the = or ; button on the steer-

ing wheel, open the menu bar.

Operating the on-board computer

(Y page 239).

Depending on the equipment fitted in the

vehicle, you can call up the following menus:

;

=

?

A

B

R

Trip menu (Y page 242)

Vehicles with manual transmission: the indi-

cators in the lower part of the multifunction

display differ from those shown here.

For Mercedes-AMG vehicles, the indicators in

the lower and upper part of the multifunction

display differ from those shown here.

R

Navi menu (navigation instructions)

(Y page 243)

R

Audio menu (Y page 245)

R

Tel menu (telephone) (Y page 246)

R

Assist. menu (assistance) (Y page 247)

Serv. menu (Y page 250)

Settings menu (settings) (Y page 250)

AMG menu (Mercedes-AMG vehicles)

(Y page 254)

X

To display menu bar ?: press the =

or ; button on the steering wheel.

If you do not press the buttons any longer,

menu bar ? is faded out after a few sec-

onds.

Text field = shows the selected menu or

submenu as well as display messages.

The displays for the Audio, Navi and Tel

menus may differ slightly to those in your

vehicle.

The examples given in this Owner's Manual

apply to vehicles equipped with COMAND

Online.

i Set the time using Audio 20 or COMAND

Online (see the separate operating instruc-

tions).

The following messages may appear in

the multifunction display:

R

Z Gearshift recommendation for manual

transmission (Y page 168) or for automatic

Z

Menus and submenus

242

When 9,999 hours or 99,999 kilometres have

been exceeded, the trip computer is auto-

matically reset From reseett.

Trip menu

Standard display

ECO display

X

Press and hold the % button on the

steering wheel until the Trip menu with

trip meter : and total distance

recorder ; appears.

The ECO display is not available in Mercedes-

AMG vehicles.

X

Press the = or ; button on the steer-

Trip computer "From start" or "From

reset"

ing wheel to select the Trip menu.

Press the 9 or : button to select

X

ECO DISPLAYY.

If the ignition remains switched off for longer

than four hours, the ECO display will be auto-

matically reset.

Further information on the ECO display

(Y page 188).

:

Distance

Driving time

Average speed

Displaying the range and current fuel

consumption

;

=

?

Average fuel consumption

X

Press the = or ; button on the steer-

ing wheel to select the Trip menu.

X

Press the 9 or : button to select

From starrtt or From reseett.

The values in the From starrtt submenu are

calculated from the start of a journey whilst

the values in the From reseett submenu are

calculated from the last time the submenu

was reset (Y page 243).

In the following cases, the trip computer is

automatically reset From starrtt:

Mercedes-AMG vehicles: the menu only dis-

plays range :.

X

Press the = or ; button on the steer-

ing wheel to select the Trip menu.

X

Press 9 or : to select the display

with approximate range : and current fuel

consumption ;.

Approximate range : that can be covered

is calculated according to your current driv-

ing style and the amount of fuel in the tank.

If there is only a small amount of fuel left in

R

the ignition has been switched off for more

than four hours

R

999 hours have been exceeded.

R

9,999 kilometres have been exceeded.

Menus and submenus

243

X

the fuel tank, a vehicle being refuelled C

appears instead of approximate range :.

Press a to confirm.

Press : to select Yes and press a to

Recuperation display = shows you if

energy has been recuperated from the

kinetic energy in overrun mode and saved

in the battery. Recuperation display =

depends on the engine installed and is

therefore not available in all vehicles.

confirm.

You can reset the values of the following func-

tions:

R

Trip meter

"From start" trip computer

"From reset" trip computer

R

Digital speedometer

ECO display

If you reset the values in the "ECO display",

the values in the "From start" trip computer

are also reset. If you reset the values in the

"From start" trip computer, the values in the

"ECO display" are also reset.

Navigation menu

X

Press the = or ; button on the steer-

ing wheel to select the Trip menu.

Displaying navigation instructions

X

Press the 9 or : button to select

In the Navi menu, the multifunction display

shows navigation instructions.

Further information on navigation can be

found in the separate Audio 20 or COMAND

Online operating instructions.

digital speedometer ;.

Gearshift recommendation : Z may also

be displayed.

Observe the information on gearshift rec-

ommendation : for manual transmission

(Y page 168) or for automatic transmission

(shifting manually) (Y page 177).

Mercedes-AMG vehicles: a gearshift rec-

ommendation is shown in the status bar of

the multifunction display and not in the dig-

ital speedometer display.

X

Switch on Audio 20 or COMAND Online;

see the separate operating instructions.

X

Press the = or ; button on the steer-

ing wheel to select the Navi menu.

Route guidance not active

Resetting values

:

Direction of travel

;

Current road

X

Press the = or ; button onthe steer-

ing wheel to select the Trip menu.

X

Press the 9 or : button to select the

function that you wish to reset.

Z

Menus and submenus

244

Route guidance active

Change of direction announced with a

lane recommendation

No change of direction announced

:

Road to which the change of direction

:

Distance to the destination

Distance to the next change of direction

Current road

leads

;

Distance to change of direction and visual

distance display

=

?

Symbol indicating "follow the road's

course"

=

Lanes not recommended

Recommended lane and new lane during a

?

change of direction

Change-of-direction symbol

Change of direction without lane recom-

mendation

A

On multilane roads, new lane recommenda-

tions can be displayed for the next change of

direction if the digital map supports this data.

During the change of direction, new lanes

may be added.

Lane not recommended =: you will not be

able to complete the next change of direction

if you stay in this lane.

Recommended lane and new lane during a

change of direction ?: in this lane you will be

able to complete the next two changes of

direction without changing lane.

:

Road to which the change of direction

leads

Distance to change of direction and visual

distance display

;

=

Change-of-direction symbol

When a change of direction is to be made, you

will see symbol = for the change of direction

and distance graphic ;. This shortens

towards the top of the display as you

Other status indicators of the naviga-

tion system

approach the point of the announced change

of direction. The change of direction starts

once the distance display reaches zero.

The navigation system displays additional

information and the vehicle status.

Possible displays

R

New routee... or Calculating route...

Menus and submenus

245

Audio player or audio media operation

A new route is calculated.

R

Road not mapped

The vehicle position is inside the area of the

digital map but the road is not recognised,

e.g. new roads, car parks or private land.

R

No route

No route could be calculated to the selec-

ted destination.

O

:

Current track

Audio files from various audio players or

media can be played, depending on the equip-

ment fitted in the vehicle.

You have reached the destination or an

intermediate destination.

X

Switch on Audio 20 or COMAND Online and

Audio menu

select audio CD or MP3 mode (see the sep-

arate operating instructions).

Press the = or ; button on the steer-

Selecting a radio station

X

ing wheel to select the Audio menu.

^XTo select the next/previous track:

briefly press the 9 or : button.

^XTo select a track from the track list

(rapid scrolling): press and hold the 9

or : button until the desired track

appears.

If you press and hold the 9 or :

button, the rapid scrolling speed is

increased. Not all audio players or media

support this function.

:

Active station list

Station with preset position

;

The multifunction display shows station ;

with station frequency or station name. The

preset position is only displayed along with

station ; if this has been stored.

If track information is stored on the audio

player or media, the multifunction display will

show the number and title of the track.

X

Switch on Audio 20 or COMAND Online and

select Radio (see the separate operating

instructions).

Video DVD operation

X

Press the = or ; button on the steer-

ing wheel to select the Audio menu.

^XTo select a preset list or station list:

press and briefly hold the 9 or :

button until the preset list or station list in

the desired frequency range is shown.

X

To select a station: briefly press 9

or :.

Only for vehicles with COMAND Online: you

can use the Audio menu to play video DVDs.

i DAB radio mode (Digital Audio Broadcast-

ing) is an optimised digital transmission

standard designed for the mobile reception

of radio transmissions.

Z

Menus and submenus

246

X

Switch on COMAND Online and select

video DVD (see the separate operating

instructions).

Press the = or ; button on the steer-

ing wheel to select the Audio menu.

Telephone menu

Introduction

WARNING

G

Operating the integrated information systems

and communications equipment in the vehicle

while driving will distract you from traffic con-

ditions. You could then lose control of the

vehicle. There is a risk of an accident.

Only operate these devices if road traffic con-

ditions permit. If you are unsure about the

surrounding conditions, pull over to a safe

location and make entries only while the vehi-

cle is stationary.

^XTo select the next or previous scene:

briefly press the 9 or : button.

^XTo select a scene from the scene list

(rapid scrolling): press and hold the 9

or : button until desired scene :

appears.

TV operation

When telephoning, you must observe the

legal requirements for the country in which

you are currently driving.

X

Switch on the mobile phone (see the man-

ufacturer's operating instructions).

X

Switch on Audio 20 or COMAND Online;

see the separate operating instructions.

Insert the mobile phone into the bracket

(Y page 318).

Only for vehicles with COMAND Online: you

can use the Audio menu to select a TV sta-

tion.

The preset position is only displayed along

with channel : if this has been stored.

X

or

X

®

Establish a Bluetooth connection to Audio

X

Switch on COMAND Online and select TV

20 or COMAND Online; see the separate

operating instructions.

Press the = or ; button on the steer-

ing wheel to select the Tel menu.

(see the separate operating instructions).

X

Press the = or ; button on the steer-

X

ing wheel to select the Audio menu.

X

To select a stored channel: briefly press

You will see one of the following display mes-

sages in the multifunction display:

the 9 or : button.

^XTo select a channel from the channel

list: press and briefly hold the 9

or : button.

R

Telephone rreeaaddyy or the name of the net-

work provider: the mobile phone has found

a network and is ready to receive.

i You can store TV channels in COMAND

Online (see the separate operating instruc-

tions).

R

Telephone NNoo sseerrvviiccee: there is no net-

work available or the mobile phone is

searching for a network.

i You can obtain further information about

suitable mobile phones and connecting

mobile phones via Bluetooth^®:

R

at any Mercedes-Benz Service Centre

R

on the Internet at http://

www.mercedes-benz.com/connect

Menus and submenus

247

Accepting a call

^XIf there is more than one number for a

particular name: press the 6 or a

button to display the numbers.

X

Press the 9 or : button to select the

number you want to dial.

X

Press the 6 or a button to start dial-

ling.

or

If someone calls you when you are in the Tel

menu, a display message appears in the mul-

tifunction display.

X

If you do not want to make the call: press

the ~ or % button.

You can accept a call at any time, even if you

are not in the Tel menu.

Redialling

The on-board computer saves the last names

or numbers dialled in the redial memory.

X

Press the 6 button on the steering

wheel to accept an incoming call.

X

Press the= or ; button on the steer-

ing wheel to select the Tel menu.

Press the 6 button to switch to the

redial memory.

Press the 9 or : button to select the

desired name or number.

Press the 6 or a button to start dial-

Rejecting or ending a call

X

You can reject or end a call any time even if

you are not in the Tel menu.

X

Press the ~ button on the steering

wheel to reject or end an incoming call.

X

ling.

Selecting an entry in the phone book

or

X

If you do not want to make the call: press

the ~ or % button.

X

Press the = or ; button on the steer-

ing wheel to select the Tel menu.

X

Press the 9, : or a button to

switch to the phone book.

Authorise access to the phone book on the

phone.

Assistance menu

Introduction

X

Press the 9 or : button to select the

desired name.

or

X

To begin rapid scrolling: press and hold

the 9 or : button for longer than

one second.

Rapid scrolling stops when you release the

button or reach the end of the list.

^XIf only one telephone number is stored

for a name: press the 6 or a button

to start dialling.

Depending on the equipment fitted in the

vehicle, you have the following options in the

Assist. menu:

R

Showing the assistance graphic

or

(Y page 248)

R

Activating/deactivating the Traffic Sign

Assist message function (Y page 248)

Z

Menus and submenus

248

®

R

Traffic Sign Assist

Activating/deactivating ESP (except

Mercedes-AMG vehicles) (Y page 248)

Activating/deactivating COLLISION PRE-

VENTION ASSIST PLUS (Y page 249)

Activating/deactivating ATTENTION

In the Trafffic Sign Assist menu, you can

switch the Traffic Sign Assist message func-

tion on or off. When the message function is

activated, detected traffic signs and informa-

tion appear in the multifunction display for

five seconds.

ASSIST (Y page 249)

Activating/deactivating Blind Spot Assist

(Y page 249)

X

Press the = or ; button on the steer-

Activating/deactivating Lane Keeping

ing wheel to select the Assisst. menu.

Assist (Y page 249)

X

Press the 9 or : button to select

Traffic Sign Assist.

Press a to confirm.

Showing the assistance graphic

X

The current selection appears.

^XTo activate/deactivate the message

function: press a again.

Further information about Traffic Sign Assist

(Y page 223).

Deactivating/activating ESP^®

Observe the important safety notes on ESP^®

(Y page 73).

WARNING

G

X

Press the = or ; button on the steer-

If you deactivate ESP^®, ESP^®no longer sta-

bilises the vehicle. There is an increased risk

of skidding and an accident.

Only deactivate ESP^®in the situations descri-

bed in the following.

ing wheel to select the Assisst. menu.

Press 9 or : to select Assistance

graphic.

Press a to confirm.

The assistance graphic shows you the sta-

tus of and/or information from the follow-

ing driving systems or driving safety sys-

tems:

X

It may be best to deactivate ESP^®in the fol-

lowing situations:

R

when using snow chains

R

Traffic Sign Assist (Y page 223)

R

in deep snow

R

DISTRONIC PLUS (Y page 196)

R

on sand or gravel

R

COLLISION PREVENTION ASSIST PLUS

Deactivating/activating ESP^®on Mercedes-

(Y page 70)

R

ATTENTION ASSIST (Y page 222)

AMG vehicles (Y page 75).

For further information about ESP^®, see

R

Lane Keeping Assist (Y page 228)

(Y page 73).

X

Press : to display the ATTEN-

TION ASSIST assessment.

X

Start the engine.

X

Press the = or ; button on the steer-

ing wheel to select the Assisst. menu.

X

Press 9 or : to select ESP.

Menus and submenus

249

X

Press a to confirm.

The current selection appears.

Press the : or 9 button to set Off,

Standard or Sensitive.

Press the a button to save the setting.

When ATTENTION ASSIST is deactivated,

the é symbol appears in the multifunc-

tion display in the assistance graphic dis-

play.

To activate/deactivate: press a

again.

ESP^®is deactivated if the å warning

lamp in the instrument cluster lights up

continuously when the engine is running.

For further information about ATTENTION

ASSIST, see (Y page 222).

If the ÷ and å warning lamps light up

continuously, ESP^®is not available due to a

malfunction.

Observe the information on warning lamps

(Y page 297).

Activating/deactivating Blind Spot

Assist

Observe the information on display messages

(Y page 258).

X

Press the = or ; buttonon the steer-

ing wheel to select the Assist. menu.

Press the 9 or : button to select

Blind Spot Assist.

Press a to confirm.

The current selection appears.

Activating/deactivating COLLISION

PREVENTION ASSIST PLUS

X

Press the = or ; buttonon the steer-

To activate/deactivate: press a

ing wheel to select the Assist. menu.

again.

X

Press the 9 or : button to select

Collision Prevvent. Assist.

Press a to confirm.

The current selection appears.

Further information about Blind Spot Assist

(Y page 226).

X

Activating/deactivating Lane Keeping

Assist

X

To activate/deactivate: press a

again.

When COLLISION PREVENTION ASSIST

PLUS is deactivated, the æ symbol

appears in the multifunction display in the

assistance graphic display.

X

Press the = or ; buttonon the steer-

ing wheel to select the Assist. menu.

Press the 9 or : button to select

Lane Keeping Assist.

Press a to confirm.

The current selection appears.

X

For further information about COLLISION

PREVENTION ASSIST PLUS, see (Y page 70).

X

Press a again to confirm.

Press the : or 9 button to set Off,

Standard or Adaptive.

Press the a button to save the setting.

When Lane Keeping Assist is activated, the

multifunction display shows the lane mark-

ings as bright lines in the assistance

graphic.

Activating/deactivating ATTENTION

ASSIST

X

Press the = or ; buttonon the steer-

X

ing wheel to select the Assist. menu.

X

Press the 9 or : button to select

Attention AAssistt.

X

Press a to confirm.

The current selection appears.

Press a to confirm.

For further information about Lane Keeping

Assist, see (Y page 228).

X

Z

Menus and submenus

250

tain displays appear in kilometres or miles in

the multifunction display.

Service menu

X

Press the = or ; button on the steer-

ing wheel to select the Settings menu.

X

Press the : or 9 button to select the

Instrument cluster submenu.

X

Press a to confirm.

X

Press the : or 9 button to select the

Depending on the equipment fitted in the

vehicle, you have the following options in the

Serv. menu:

Display uunit Speed-/odometer func-

tion.

You will see the selected setting: km or

miles.

R

Calling up display messages in the mes-

sage memory (Y page 257)

X

Press the a button to save the setting.

R

Restarting the tyre pressure loss warning

system (Y page 364)

Calling up the service due date

(Y page 328)

The selected unit of measurement for dis-

tance applies to the:

R

digital speedometer in the Trip menu

R

total distance recorder and the trip meter

R

trip computer

Settings menu

Introduction

R

current fuel consumption and approximate

range

navigation instructions in the Navi menu

cruise control

SPEEDTRONIC

DISTRONIC PLUS

R

ASSYST PLUS service interval display

Switching the additional speedometer

on/off

Depending on the equipment fitted in the

vehicle, In the Settings menu you have the

following options:

United Kingdom: this function is unavailable.

If the additional speedometer is switched on,

the speed is shown in the status bar of the

multifunction display instead of the outside

temperature.

The speed display is inverse to your speed-

ometer.

R

Changing the instrument cluster settings

R

Changing the light settings

R

Changing the vehicle settings

R

Changing the heating settings

R

Changing the convenience settings

X

Press the = or ; button on the steer-

ing wheel to select the Settings menu.

R

Restoring the factory settings

X

Press the : or 9 button to select the

Instrument cluster

Instrument cluster submenu.

X

Press a to confirm.

Selecting the distance unit

The Display unitt Speed-/odometer:

function allows you to choose whether cer-

Menus and submenus

251

X

Press the : or 9 button to select the Further information on daytime driving lights

Dig. speedo [mph] function.

You will see the selected setting: on or off.

(Y page 120).

Vehicle

Press the a button to save the setting.

Setting permanent SPEEDTRONIC

Selecting permanent display

You can set permanent SPEEDTRONIC using

the Limit speed (winnter tyres) function.

United Kingdom: this function is unavailable.

The Permanent display: function allows

you to choose whether the multifunction dis-

play always shows the outside temperature or

the speed.

X

Press the = or ; buttonon the steer-

ing wheel to select the Settings menu.

X

Press the : or 9 button to select the

Vehicle submenu.

Press a to confirm.

The speed display is inverse to your speed-

ometer.

X

Press the = or ; buttonon the steer-

ing wheel to select the Settings menu.

X

Press : or 9 to select the Limit

speed (winter tyres): function.

You will see the current setting.

X

Press the : or 9 button to select the

Instrument cluster submenu.

X

Press a to confirm.

X

Press a to confirm.

X

Press the : or 9 button to adjust

permanent SPEEDTRONIC in increments of

ten (1600 km/h to 240 km/h). The Off set-

ting switches permanent SPEEDTRONIC

off.

X

Press the : or 9 button to select the

Permanent display: function.

The current setting, outside tempera‐

ture or Dig. speedo [mph]:, appears.

X

Press the a button to store the entry.

X

Press the a button to save the setting.

For further information on permanent SPEED-

TRONIC (Y page 196).

Lights

Activating/deactivating the automatic

locking feature

Switching the daytime driving lights

on/off

X

Press the = or ; buttonon the steer-

ing wheel to select the Settings menu.

Press the : or 9 button to select the

The Daytime driving lights function can

only be switched on with the engine turned

off.

X

Vehicle submenu.

Press a to confirm.

X

Press the = or ; buttonon the steer-

ing wheel to select the Settings menu.

X

Press the : or 9 button to select the

X

Press the : or 9 button to select the

Automatic doorr locks function.

If the Automatic dooor locks function is

switched on, the multifunction display

shows the doors in orange.

Lights submenu.

Press a to confirm.

Press the : or 9 button to select the

Daytime driving lights function.

If the Daytime driving lights function

has been switched on, the cone of light and

the W symbol in the multifunction dis-

play are shown in orange.

X

Press the a button to save the setting.

If you activate the Automatic dooor locks

function, the vehicle is centrally locked above

a speed of around 15 km/h.

X

Press the a button to save the setting.

For further information on the automatic lock-

ing feature; see (Y page 91).

Z

Menus and submenus

252

Activating/deactivating the acoustic

locking confirmation

There is a risk of fire.

When the auxiliary heating is switched on,

make sure that:

If you switch on the Acousstic Lockk function,

an acoustic signal sounds when you lock the

vehicle.

R

no flammable materials come into contact

with hot vehicle components

X

Press the = or ; button on the steer-

R

the exhaust gas can escape from the

ing wheel to select the Settinngs menu.

exhaust pipe unhindered

X

Press the : or 9 button to select the

R

the exhaust gas does not come into contact

Vehiclee submenu.

with flammable materials.

X

Press a to confirm.

X

!

Operating the auxiliary heating/ventila-

Press the : or 9 button to select the

Acoustic LLock function.

If the Acousstic Lockk function is activated,

the & symbol in the multifunction dis-

play lights up orange.

tion draws on the vehicle battery. After you

have heated or ventilated the vehicle a

maximum of two times, drive for a longer

distance.

X

Press the a button to save the setting.

Only vehicles with auxiliary heating have this

function.

Heating

In the Heatting submenu, you can select a

stored departure time or change a departure

time.

Auxiliary heating departure time

DANGER

G

The auxiliary heating timer function calcu-

lates the switch-on time according to the out-

side temperature so that the vehicle is pre-

heated by the departure time. When the

departure time is reached, the auxiliary heat-

ing continues to heat for a further five

minutes and then switches off. The auxiliary

heating adopts the set air conditioning or

THERMOTRONIC temperature setting.

If the exhaust pipe is blocked or sufficient

ventilation is not possible, toxic exhaust

fumes can enter the vehicle, especially car-

bon monoxide. This is the case, e.g. in

enclosed spaces, or if the vehicle is stuck in

snow. There is a risk of fatal injuries.

You should switch off the auxiliary heating in

enclosed spaces which do not have an extrac-

tion system, e.g. a garage. If the vehicle is

stuck in snow and you must leave the auxiliary

heating running, keep the exhaust pipe and

the area around the vehicle clear of snow. To

guarantee a sufficient supply of fresh air, open

a window on the side of the vehicle away from

the wind.

You can switch off the auxiliary heating by

using the remote control or the auxiliary heat-

ing button on the centre console.

i Switch the auxiliary heating on regularly

once a month for about ten minutes.

Further information on auxiliary heating

(Y page 148).

WARNING

G

When the auxiliary heating is switched on,

parts of the vehicle can become very hot.

Selecting the departure time or deactivat-

ing a selected departure time

X

Press the = or ; button on the steer-

Flammable materials such as leaves, grass or

twigs may ignite if they come into contact

with:

ing wheel to select the Settinngs menu.

X

Press the : or 9 button to select the

Heatingg submenu.

R

hot parts of the exhaust system

the exhaust gas itself

X

Press a to confirm.

R

The current setting appears.

Menus and submenus

253

X

Switching the fold mirrors in when lock-

ing function on/off

Press a again.

Press the : or 9 button to select

one of the three departure times or Timer

off (no timer active).

This function is only available when the vehi-

cle is equipped with the electrical fold-in func-

tion.

X

Press a to confirm.

If a departure time is selected, the yellow

indicator lamp lights up on the auxiliary

heating button.

When you activate the Auto. fold-iin mir‐

rors function, the exterior mirrors are folded

in when the vehicle is locked. When you

unlock the vehicle and then open the driver's

or front-passenger door, the exterior mirrors

Changing the departure time

X

Press the = or ; buttonon the steer- fold out again.

ing wheel to select the Settings menu.

If you have switched on the Auto. fold-in

Press the : or 9 button to select the mirrors function and you fold in the exterior

X

Heating submenu.

Press a to confirm.

The current setting appears.

Press the : or 9 button to select

Change A, Change B or Change C.

Press a to confirm.

You can now change the departure time.

Press the = or ; button to select the

display to be changed: hours, minutes.

Press the : or 9 button to set the

selected display.

Press the a button to store the entry.

The yellow indicator lamp on the auxiliary

heating button lights up.

mirrors using the button on the door

(Y page 114), they will not fold out automat-

ically. The exterior mirrors can then only be

folded out using the button on the door.

X

Press the = or ; buttonon the steer-

ing wheel to select the Settings menu.

X

Press the : or 9 button to select the

Conveniencce submenu.

X

Press a to confirm.

X

Press the : or 9 button to select the

Auto. fold-in mirrors function.

If the Auto. fold-in miirrorss function is

switched on, the multifunction display

shows the exterior mirror in orange.

X

Press the a button to save the setting.

Comfort

Resetting to factory settings

Switching belt adjustment on/off

X

Press the = or ; buttonon the steer-

X

Press the = or ; buttonon the steer-

ing wheel to select the Settings menu.

X

Press the : or 9 button to select the

X

Press the : or 9 button to select the

Factory setting submenu.

Conveniencce submenu.

X

Press a to confirm.

X

Press a to confirm.

The Reset all settings? function

appears.

X

Press the : or 9 button to select the

Belt adjustment function.

X

Press the : or 9 button to select No

When the Belt adjustment function is

activated, the seat belt is displayed in

orange in the multifunction display.

or Yes.

X

Press the a button to confirm the selec-

tion.

X

Press the a button to save the setting.

If you have selected Yes, the multifunction

display shows a confirmation message.

For further information on belt adjustment,

see (Y page 45).

Z

On-board computer/Displays -> Menus and submenus for Your Mercedes A Class 4 Door Third Generation (2012-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals