2012-2017 Mercedes A Class 4 Door Seats, steering wheel and mirrors -> Memory function User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seats, steering wheel and mirrors -> Memory function for Your Mercedes A Class 4 Door Third Generation (2012-2017)

Memory function  
116  
X
X
Press button ; for the exterior mirror on  
the front-passenger side.  
Use adjustment button = to adjust the  
exterior mirror. You should see the rear  
wheel and the kerb in the exterior mirror.  
WARNING  
G
If the memory function adjusts the seat, you  
and other vehicle occupants – particularly  
children – could become trapped. There is a  
risk of injury.  
X
X
Press memory button M ? and one of the  
arrows on adjustment button = within  
three seconds.  
The parking position is stored if the exterior  
mirror does not move.  
If the mirror moves out of position, repeat  
the steps.  
While the memory function is making adjust-  
ments, make sure that no one has any part of  
their body within the sweep of the seat. If  
someone becomes trapped, immediately  
release the memory function position button.  
The adjustment is stopped.  
WARNING  
G
If children activate the memory function, they  
could become trapped, especially if they are  
unattended. There is a risk of injury.  
When leaving the vehicle, always take the key  
with you and lock the vehicle. Never leave  
children unattended in the vehicle.  
Calling up a stored parking position  
X
Turn the key to position 2 in the ignition  
lock (Y page 157).  
X
Adjust the exterior mirror on the front-  
passenger side with the corresponding but-  
ton (Y page 113).  
The memory function can be used at any time,  
e.g. even when the key is not in the ignition  
lock.  
X
Engage reverse gear.  
The exterior mirror on the front-passenger  
side moves to the stored parking position.  
The exterior mirror on the front-passenger  
side moves back to its original position:  
Storing settings  
R
as soon as you exceed a speed of  
With the memory function, you can store up  
to three different settings, e.g. for three dif-  
ferent people.  
The following settings are stored as a single  
memory preset:  
15 km/h  
R
about ten seconds after you have disen-  
gaged reverse gear  
if you press button : for the exterior mir-  
ror on the driver's side.  
R
R
seat and backrest position  
R
driver's side: position of the exterior mir-  
Memory function  
rors on the driver's and front-passenger  
sides  
Important safety notes  
WARNING  
G
If you use the memory function on the driver's  
side while driving, the adjustments could  
cause you to lose control of the vehicle. There  
is a risk of an accident.  
Only use the memory function on the driver's  
side while the vehicle is stationary.  
Memory function  
117  
X
X
Adjust the seat (Y page 109).  
Adjust the exterior mirror on the driver's  
side (Y page 113).  
X
Briefly press the M memory button and  
then press preset position button 1, 2 or 3  
within three seconds.  
The settings are stored in the selected pre-  
set position. A tone sounds when the set-  
tings have been completed.  
Calling up a stored setting  
X
Press and hold the relevant preset position  
button 1, 2 or 3 until the seat and exterior  
mirrors are in the stored position.  
i The setting procedure is interrupted as  
soon as you release the storage position  
button.  
Z
118  

Related Topics

Popular Owner Manuals