Climate control
126
Switching the synchronizatiion fuunctiioon on/oꢂ viia
the multimeddiaa syystem
Switching air-recirrculation mode on/oꢂ
Air vents
#
Press the g button.
The interior air will be recirculated.
Adjusting the front air vents
Multimedia system:
4
&
WARNINGG Risk of burns or frostbite due to
being too close to the air vents
5
Climate Menu
First Row of Seats
Air-recirculation mode automatically switches to
fresh air mode aꢃer a while.
Climate control can be set centrally using the syn-
chronization function. The driver's settings for
temperature, air quantity and air distribution are
adopted automatically for all climate zones.
Very hot or very cold air can ꢁow from the air
vents.
%
If air-recirculation mode is switched on, the
windows may fog up more quickly. Switch on
air-recirculation mode only brieꢁy.
#
Make sure that all vehicle occupants
always maintain a suꢄcient distance
from the air vents.
#
Select SYNC and switch on or oꢂ.
Switching the residual heat on/oꢂ (Caanada)
Requirements:
R
The vehicle is parked.
#
If necessary, direct the airꢁow to another
area of the vehicle interior.
Removing condensation from the windows
Windows fogged up on the inside
To guarantee the ꢁow of fresh air through the air
vents into the vehicle interior, comply with the fol-
lowing:
#
Press the à button.
%
Only vehicles with a diesel engine can use
residual heat.
#
If the windows continue to fog up: press the
¬ button.
It is possible to make use of the residual heat
from the engine to continue heating or ventilating
the front compartment of the vehicle for approx-
imately 30 minutes, depending on the tempera-
ture set.
R
Always keep the vents and ventilation grilles in
the vehicle interior clear.
Windows fogged up on the outside
#
R
Keep the air inlet free of residue build-up
(/ page 264).
Switch on the windshield wipers.
#
Press the à button.
#
To activate: press the Á button.
Residual heat will be switched oꢂ automatically.