2005-2010 Mercedes B Class SUV Introduction -> Operating safety User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Introduction -> Operating safety for Your Mercedes B Class SUV First Generation (2005-2010)

Should you have any questions concerning
equipment and operation, please consult a
Mercedes-Benz Service Centre.
The Owner's Manual and the Service Booklet
are important documents and should be kept
in the vehicle.
Operating safety
Safety notes
G
WARNING
All work on the vehicleand, in particular, work
relevant to safety or on safety-related sys-
tems must be carried outataqualified spe-
cialist workshop. The specialist workshop
must have the necessary specialist knowl-
edge and tools to carry out the work required.
Mercedes-Benz recommends that you use a
Mercedes-Benz Service Centre for this pur-
pose.
G
WARNING
Some safety systems only function when the
engine is running. You should therefore never
switch off the engine when driving.Otherwise,
the safety systems of your vehicle may not
function correctly and as a result will no lon-
gerprotect you and other persons as inten-
ded. In addition, there is a risk that you may
lose control of yourvehicle and thus cause an
accident.
G
WARNING
Work carried out incorrectly, or alterations
made to the vehicle, e.g. re-routing of cables
under coverings, could cause the safety sys-
tems of your vehicle to stop working properly.
The safety systems would thus no longer pro-
tectyou and other persons as intended. In
addition, there is a risk that you may lose con-
trol of your vehicle and thus cause an acci-
dent.
All work and alterations to the vehicle, e.g.
installations or modifications, should there-
fore be carried out at aqualified specialist
workshop.
G
WARNING
If work on electronic equipment and its soft-
ware is carried out incorrectly, this equipment
could stop working.The electronic systems
are networked via interfaces. Tampering with
these electronic systems could cause mal-
functions in systems which have not been
modified. Malfunctions such as these can
seriously jeopardise the vehicle's operating
safety and therefore your own safety.
You should therefore have all work and mod-
ifications to electronic components carried
out at a qualified specialist workshop.
General notes
The following information applies to all com-
ponents of this vehicle that receive and/or
transmit radio waves and to COMAND:
The components of this vehicle that receive
and/or transmit radio waves are compliant
with the basic requirements and all other rel-
evant conditions of Directive 1999/5/EC.
You can obtain further information from any
Mercedes-Benz Service Centre.
The components are approved by the vehicle
manufacturer in accordance with European
Automotive EMC Directive 95/54/EC. Oper-
ation according to its intended purpose is
thus approved for your vehicle. The equip-
ment does not require certification.
The equipmentconforms to the relevant
equipment-specific EMC specifications in
accordance with the following European
standards:
R
EN 55013
R
EN 55020
Therefore, adherence to the relevant specifi-
cations for electromagnetic compatibility is
guaranteed for these components.
As a result, interference caused by your com-
ponents to other electrical/electronic com-
Introduction
21
Z
ponents and interference to your compo-
nents caused by other electrical/electronic
components can be largely prevented.
Diagnostics connection
G
WARNING
If you connect equipment to the diagnostics
connection, it can affect the operation of the
vehicle systems. This can impair the operating
safety of your vehicle while driving. There is a
risk of accident.
Do not connect any equipment to the diag-
nostics connection.
G
WARNING
Loose equipment or equipment cables that
are connected to the diagnostics connection
can obstruct the area around the pedals. The
equipment or the cables could get between
the pedals in the event of sudden braking or
acceleration. As a result, the movement of the
pedals may be impaired. There is a risk of
accident.
Do not attach any equipment or cables in the
driver footwell.
!
If the engine is switched off and equip-
ment on the diagnostics connection is
used, the starter battery may discharge.
The diagnostics connection is only intended
for the connection of diagnostic equipment at
a qualified specialist workshop.
Connecting equipment to the diagnostics
connection can, for example, lead to emis-
sions monitoring information being reset.
This may lead to the vehicle failing to meet
the requirements of the nextemissions test
during the main inspection.
Qualified specialist workshop
Aqualified specialist workshop has the nec-
essary specialist knowledge, tools and quali-
fications to correctlycarry out the work
required on your vehicle.This is especially the
case for work relevant to safety.
Observe the information in the Service Book-
let.
Always have the following work carried out at
a qualified specialist workshop:
R
work relevant to safety
R
service and maintenance work
R
repair work
R
alterations, installation work and modifica-
tions
R
work on electronic components
Mercedes-Benzrecommends that you use a
Mercedes-Benz Service Centre.
Vehicle registration
Mercedes-Benz may ask its Service Centres
to carry out technical inspections on certain
vehicles to improve their quality or safety.
If you did not purchase your vehicle from an
authorised specialist dealer and your vehicle
has never been inspected at a Mercedes-
BenzService Centre, it is possible that your
vehicle is not registered in your name with
Mercedes-Benz. Mercedes-Benz can only
informyou about vehicle checks if it has your
registration data.
It is advisable to register your vehicle with a
Mercedes-Benz Service Centre.
InformMercedes-Benzas soon as possible
aboutany change in address or vehicle own-
ership.
Correctuse
G
WARNING
Various warning stickers are affixed to your
vehicle. Their purpose is to draw your atten-
tion, and the attention of others, to various
dangers. Therefore, do not remove any warn-
ing stickers unless the sticker clearly states
that you may do so.
22
Introduction
If you remove the warning stickers, you or
others could be injured by failing to recognise
certain dangers.
When driving yourvehicle observe the follow-
ing information:
R
the safety notes in this manual
R
the "Technical data" section in this manual
R
traffic rules and regulations
R
laws and safety standards pertaining to
motorvehicles
Implied warranty
!
Observe the notes in these Operating
Instructions about the correct operation of
your vehicle as well as about possible dam-
age to the vehicle. Damage to your vehicle
that arises from culpable contravention of
these instructions is not covered by the
Mercedes-Benzimplied warranty of
Daimler AG.
Data stored in the vehicle
Fault data
Components critical for vehicle operation are
equipped with fault data memories as stand-
ard. There are also data storage devices
which record the technical reactions of vehi-
cle components to certain driving situations
(e.g. airbag deployment or ESP
®
interven-
tion).
This data is used exclusively to:
R
assist in the rectificationoffaults and
defects
R
help Mercedes-Benzoptimise and develop
vehicle functions
The data cannot be used to trace the vehicle's
movements.
When your vehicle is serviced by Mercedes-
Benz, this technical information can be read
out from the fault memory. This is performed
by authorised employees of the Mercedes-
Benzservice network using special diagnos-
tic computers.
After a fault has been rectified, the informa-
tion is deleted from the memory. Other mem-
ory data is constantly overwritten.
Other devices that store data
Depending on the equipment level, your vehi-
cle may feature communications and/or
entertainment systems (e.g. navigation devi-
ces, telephone systems). These allow you to
save and edit data required for the operation
of the respective device.
Further information on operation (e.g. on
deleting data) can be found in the separate
operating instructions.
Introduction
23
Z

Related Topics

Popular Owner Manuals