2005-2010 Mercedes B Class SUV Lights and windscreen wipers -> Windscreen wipers User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lights and windscreen wipers -> Windscreen wipers for Your Mercedes B Class SUV First Generation (2005-2010)

X
Lightly press the corresponding bulb into
the holder, turn it anti-clockwise and
remove it from the bulb holder.
X
Insert the corresponding new bulb into the
bulb holderand turnitclockwise.
X
Attach the bulb holder and press firmly.
The retaining lugs on the bulb holder
engage audibly.
X
Close the side trim panel (Y page 107).
Licence plate lighting
X
Switch off the lights.
X
Open the tailgate.
X
Apply a screwdriver to lamp lens : from
the outside.
X
Leverout lamp lens : and remove it.
X
Replace the bulb.
X
Insertlamp lens : into the licence plate
lamp and press it in until it engages.
Windscreen wipers
Switching the windscreen wipers on/
off
G
WARNING
The windscreenwill not longer be wiped prop-
erly if the wiper blades are worn.This could
prevent you from observing the traffic condi-
tions, thereby causing an accident. Replace
the wiper blades twice a year, ideally in spring
and autumn.
!
Do not operate the windscreen wipers
when the windscreen is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windscreen can
scratch the glass if wiping takes place when
the windscreen is dry.
If it is necessary to switch on the wind-
screen wipers in dry weather conditions,
always operate them using washer fluid.
!
If the windscreen wipers leave smears on
the windscreen after the vehicle has been
washed in an automatic car wash, this may
be due to wax or other residue. Cleanthe
windscreen with washer fluid after an auto-
matic car wash.
Combination switch
1
$ Windscreen wipers off
2
Ä Intermittent wipe, low (rain sensor
set to low sensitivity)
3
Å Intermittent wipe, high (rain sensor
set to high sensitivity)
4
° Continuous wipe, slow
5
¯ Continuous wipe, fast
B
í Single wipe/ î To wipe the
windscreen using washer fluid
X
Turn the key to position 1 or 2 in the ignition
lock.
X
Turn the combination switch to the corre-
sponding position.
!
Vehicles with a rain sensor: if the wind-
screen becomes dirty in dry weather con-
ditions, the windscreen wipers may be acti-
vated inadvertently. This could damage the
108
Windscreen wipers
Lights and windscreen wipers
windscreen wiper blades or scratch the
windscreen.
For this reason, you should always switch
off the windscreen wipers in dry weather.
Vehicles with arain sensor: in the Ä or
Å position, the appropriate wiping fre-
quency is automatically set according to the
intensity of the rain. In the Å position, the
rainsensor is more sensitive than in
the Ä position, causing the windscreen
wipers to wipe more frequently.
Switching the rear window wiper on/
off
Combination switch
:
è Switch
2
ô To wipe with washer fluid
3
I To switch on intermittent wiping
4
0 To switch off intermittent wiping
5
ô To wipe with washer fluid
X
Turn the key to position 1 or 2 in the ignition
lock.
X
Turn switch : on the combination switch
to the corresponding position.
When the rear window wiper is switched on,
the icon appears in the instrument cluster.
Replacing the wiper blades
Important safety notes
G
WARNING
The wiper arms could start moving and cause
an injury if you leave the windscreen wipers
switched on.
Remove the key from the ignition lock before
replacing the wiper blades.
!
To avoid damaging the windscreen wiper
blades, make sure that you touch only the
wiper arm of the windscreen wiper.
!
Never open the bonnet if a windscreen
wiper arm has been folded away from the
windscreen.
Never fold a windscreen wiper arm without
a wiper blade back onto the windscreen/
rear window.
Hold the windscreen wiper arm firmly when
you change the wiper blade. If you release
the windscreen wiper arm without a wiper
blade and it falls onto the windscreen, the
windscreen may be damaged by the force
of the impact.
Mercedes-Benzrecommends that you have
the wiper blades changed at aqualified
specialist workshop.
Replacing the windscreen wiper blades
Removing the wiper blades
X
Remove the key from the ignition lock.
X
Fold the wiper arm away from the wind-
screen.
Windscreen wipers
109
Lights and windscreen wipers
Z
X
Press both release clips ;.
X
Fold wiper blade : in the direction of
arrow = away from wiper arm ?.
X
Remove wiper blade : in the direction of
arrow A.
Fitting the wiper blades
X
Position the new wiper blade : with
recess B on lug A.
X
Fold wiper blade : in the direction of
arrow = onto the wiper arm, until retaining
clips ; engage in bracket ?.
X
Make sure that wiper blade : is seated
correctly.
X
Fold the wiper arm back onto the wind-
screen.
Replacing the rear window wiper blade
G
WARNING
The wiper arm could be set in motion and
injure you if the windscreen wipers are
switched on.
Remove the key from the ignition lock before
replacing the wiper blade.
Removing the wiper blade
X
Remove the key from the ignition lock.
X
Fold wiper arm : away from the rear win-
dow until it engages.
X
Position wiper blade ; at a right angle to
wiper arm :.
X
Hold wiper arm : and press wiper
blade ; in the direction of the arrow until
it releases.
X
Remove wiper blade ;.
Fitting the wiper blade
X
Place new wiper blade ; onto wiper
arm :.
X
Hold wiper arm : and press wiper
blade ; in the opposite direction to the
arrow until it engages.
X
Make sure that wiper blade ; is seated
correctly.
X
Position wiper blade ; parallel to wiper
arm :.
X
Fold wiper arm : back onto the rear win-
dow.
Problems with the windscreen wipers
The windscreen wipers are obstructed
Leaves or snow, for example, may be
obstructing the windscreen wiper movement.
The wiper motor has been deactivated.
110
Windscreen wipers
Lights and windscreen wipers
X
For safety reasons, youshould remove the
key from the ignition lock.
X
Remove the cause of the obstruction.
X
Switch the windscreen wipers back on.
The windscreen wipers are inoperative
The windscreen wiper drive is malfunctioning.
X
Select another wiper speed on the combi-
nation switch.
X
Have the windscreen wipers checked at a
qualified specialist workshop.
The spray nozzles are misaligned
The windscreen washer fluid from the spray
nozzles no longer hits the centre of the wind-
screen. The spray nozzles are misaligned.
X
Have the spray nozzles adjusted at a quali-
fied specialist workshop.
Windscreen wipers
111
Lights and windscreen wipers
Z
112

Related Topics

Popular Owner Manuals