2005-2010 Mercedes B Class SUV On-board computer and displays -> Menus and submenus User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

On-board computer and displays -> Menus and submenus for Your Mercedes B Class SUV First Generation (2005-2010)

Menus and submenus
Menu overview
Function
:
Trip menu (Y page 193)
;
Navi menu (navigationinstructions) (Y page 194)
=
Audio menu (Y page 195)
?
Tel menu (telephone) (Y page 196)
A
Assist. menu (assistance) (Y page 198)
B
Service menu (Y page 200)
R
calls up display messages (Y page 205)
R
tyre pressure loss warning (Y page 297)
R
ASSYST PLUS service interval display (Y page 266)
C
Settings menu (Y page 200)
The numberofmenus shown depends on the optional equipment in the vehicle.
The
Audio, Navi and Tel menus differ slightly in vehicles with Audio 20 and in vehicles with
COMAND Online. The examples given in this Owner's Manual apply to vehicles equipped with
COMAND Online.
192
Menus and submenus
On-board computer and displays
Trip menu
Standard display
X
Press and hold the % button on the
steering wheel until the
Trip menu with
trip meter : and total distance
recorder ; is shown.
Trip computer "From start" or "From
reset"
Example: "From start" trip computer
:
Distance
;
Time
=
Average speed
?
Average fuel consumption
X
Press the = or ; button on the steer-
ing wheel to select the
Trip
menu.
X
Press the 9 or : button to select
From start or From reset.
The values in the
From start submenu are
calculated fromthe start of a journey whilst
the values in the
From reset
submenu are
calculated from the last time the submenu
was reset (Y page 194).
The
From start trip computer is automati-
cally reset when:
R
the ignition has been switched off for more
than four hours.
R
999 hours have been exceeded.
R
9,999 kilometres have been exceeded.
The
From reset
trip computer is automati-
cally reset if the value exceeds 9,999 hours
or 99,999 kilometres.
Displaying the range and current fuel
consumption
:
Approximate range
;
Current fuel consumption
X
Press the = or ; button on the steer-
ing wheel to select the
Trip menu.
X
Press the 9 or : button to select
current fuel consumption ; and approxi-
mate range :.
Approximate range : is calculated accord-
ing to the current driving style and the amount
of fuel in the tank. If there is only a small
amount of fuel left in the fuel tank, the display
shows a vehicle being refuelled C instead
of range :.
Digital speedometer
:
Shift recommendation
;
Digital speedometer
X
Press the = or ; button on the steer-
ing wheel to select the
Trip menu.
X
Press the 9 or : button to select
digital speedometer ;.
For further information on gearshift recom-
mendations, see (Y page 134).
Menus and submenus
193
On-board computer and displays
Z
i
If the gearshift recommendation is shown
in the multifunction display, it is not shown
in the status bar.
Resets values
Example: resetting the trip computer "From start"
You can reset the values of the following func-
tions:
R
trip meter
R
trip computer "From start"
R
trip computer "From reset"
X
Press the = or ; button on the steer-
ing wheel to select the
Trip
menu.
X
Press the 9 or : button to select the
function that you wish to reset.
X
Press a.
X
Press the : button to select
Yes
and
press the a button to confirm.
Navigation menu
Displaying navigation instructions
X
Switch on Audio 20 with Becker
®
MAP
PILOT or COMAND Online (see the sepa-
rate operating instructions).
X
Press the = or ; button on the steer-
ing wheel to select the
Navi menu.
In the
Navi menu, the multifunction display
shows navigation instructions. For more
information, see the separate operating
instructions.
Route guidance not active
:
Direction of travel
;
Current street
Activated route guidance
No change of direction announced
:
Distance to the destination
;
Distance to the next change of direction
=
Current street
?
Symbol "follow the road's course"
Change of direction announced without a
lane recommendation
:
Road to which the change of direction
leads
;
Distance to change of direction and visual
distance display
=
Change-of-direction icon
When a change of direction has been
announced, you will see visualdistance dis-
play ; next to the symbol for change of
direction =.This shortens from the bottom
194
Menus and submenus
On-board computer and displays
to the top of the display as you approach the
point of the announced change of direction.
Change of direction announced with a
lane recommendation
:
Road to which the change of direction
leads
;
Distance to change of directionand visual
distance display
=
Lane recommendation
?
New lane during a change of direction
A
Lane continues through change of direc-
tion
B
Change-of-direction icon
On multi-lane roads, lane recommendation
= may be shown for the next change of
direction. During the change of direction,
additional lanes may be displayed.
Lane recommendations are only displayed if
the relevant data is availableonthe digital
map.
Other status indicators of the naviga-
tion system
R
O:you have reached the destination or an
intermediate destination.
R
New route... or Calculating route:
calculating a new route
R
Off map or Off road:the vehicle position
is outside the area of the digital map (off-
map position).
R
No route
:no route could be calculated to
the selected destination.
Audio menu
Selecting aradio station
:
Waveband
;
Channel frequency with memory position
i
The memory position is only displayed
along with station ; if this has been
stored.
X
Switch on Audio 20 or COMAND Online
(see the separate operating instructions)
and select Radio.
X
Press the = or ; button on the steer-
ing wheel to select the
Audio
menu.
X
To selectastoredstation: briefly press
the 9 or : button.
X
To select a station from the station
list: press and briefly hold the 9
or : button.
If no stationlist is received:
X
To select astation using the station
search: press and briefly hold the 9
or : button.
i
For information on changing waveband
and storing stations, see the separate oper-
ating instructions.
i
DAB radio mode (Digital Audio Broadcast-
ing); see the separate operating instruc-
tions.
Menus and submenus
195
On-board computer and displays
Z
Audio player or audio media operation
Example: CD changer display
:
Current CD in the CD changer
;
Current track
Audio data from various audio devices or
media can be played, depending on the equip-
ment fitted in the vehicle.
X
Switch on Audio 20 or COMAND Online and
select the audio device or medium (see the
separate operating instructions).
X
Press the = or ; buttononthe steer-
ing wheel to select the
Audio
menu.
X
To selectthe next/previous track:
briefly press the 9 or : button.
X
To select a track from the track list
(rapid scrolling): press and hold the
9 or : button until desired
track ; has been reached.
If you press and hold the 9 or : but-
ton, the rapid scrolling speed is increased.
Not all audio devices or media support this
function.
If track information is stored on the audio
device or medium, the multifunction display
will show the numberand title of the track.
The current trackdoes not appear in audio
AUX mode (Auxiliary audio mode: external
audio source connected).
Video DVD operation
Example: DVD changer display
:
Current DVD in the DVD changer
;
Current scene
X
Switch on COMAND Online and select
video DVD (see the separate operating
instructions).
X
Press the = or ; button on the steer-
ing wheel to select the
Audio
menu.
X
To select the next or previous scene:
briefly press the 9 or : button.
X
To select ascene from the scene list
(rapid scrolling): press and hold the
9 or : buttonuntil desired
scene ; has been reached.
Telephone menu
Introduction
G
WARNING
Observe the legal requirements of the country
in which you are currently driving regarding
the use of mobile phones in the vehicle.
If it is permitted to use mobile phones while
the vehicle is in motion, you should only use
them when the road and traffic conditions
allow. Otherwise, you may be distracted from
the traffic conditions, cause an accident and
injure yourselfand others.
X
Switch on the mobile phone and Audio 20
or COMAND Online (see the separate oper-
ating instructions).
X
Place a mobile phone in the mobile phone
bracket (Y page 258) or establishaBlue-
tooth
®
connection with Audio 20 or
196
Menus and submenus
On-board computer and displays
COMAND Online (see the separate operat-
ing instructions).
X
Press the = or ; buttononthe steer-
ing wheel to select the
Tel menu.
You will see one of the following display mes-
sages in the multifunction display:
R
Please enter PIN:the mobile phone has
been placed in the mobile phone bracket
and the PIN has not been entered.
When you enter your PIN via the mobile
phone, LINGUATRONIC, Audio 20 or
COMAND Online, the mobile phone
searches for a network.
R
Telephone ready
or the name of the net-
work provider: the mobile phone has found
a network and is ready to receive.
R
Telephone No service: there is no net-
work available or the mobile phone is
searching for a network.
i You can obtain further information about
suitable mobile phones and connecting
mobile phones via Bluetooth
®
:
R
in any Mercedes Benz Service Centre
R
on the Internet at
Accepting acall
Example: incoming call
X
Press the 6 button on the steering
wheel to acceptanincoming call.
If someone calls you when you are in the
Tel menu, a display message appears in the
multifunctiondisplay.
You can accept a call even if you are not in
the Tel
menu.
Rejecting or ending acall
X
Press the ~ button on the steering
wheel.
You can end or reject a call even if you are not
in the
Tel menu.
Dialling anumber from the phone book
X
Press the = or ; button on the steer-
ing wheel to select the
Tel menu.
X
Press the 9, : or a button to call
up the phone book.
X
Press the 9 or : button to select the
desired name.
To start scrolling rapidly,press and hold the
9 or : button for longer than one
second.
Rapid scrolling stops when you release the
button or reach the end of the list.
X
If onlyone telephone number is stored
for a name: press the 6 or a button
to start dialling.
or
X
If there is more than one number for a
particular name: press the 6 or a
button to display the numbers.
X
Press the 9 or : button to select the
number you want to dial.
X
Press the 6 or a button to start dial-
ling.
or
X
If you do not want to make a call: press
the ~ or % button.
Redialling
The on-board computer saves the last names
or numbers dialled in the redial memory.
X
Press the = or ; button on the steer-
ing wheel to select the
Tel menu.
X
Press the 6 button to switch to the
redial memory.
X
Press the 9 or : button to select the
desired name or number.
Menus and submenus
197
On-board computer and displays
Z
X
Press the 6 or a button to start dial-
ling.
or
X
If you do not want to make a call: press
the ~ or % button.
Assistance menu
Introduction
In the Assist. menu, you have the following
options:
R
show Speed Limit Assist and activate/
deactivate its message function
R
show distance display
R
activate/deactivate ESP
®
R
activate/deactivate the distance warning
signal
R
activate/deactivate ATTENTION ASSIST
R
activate/deactivate Blind Spot Assist
R
activate/deactivate Lane Keeping Assist
Speed Limit Assist
Displaying Speed Limit Assist
X
Press the = or ; button on the steer-
ing wheel to select the
Assist.
menu.
X
Press the 9 or : button to select
Speed Lim. Asst..
X
Press a.
Under certain conditions (Y page 176),
detected speed limits are shown in the mul-
tifunction display.
Activating/deactivating the Speed Limit
Assist message function
X
Press the = or ; button on the steer-
ing wheel to select the
Assist. menu.
X
Press the 9 or : button to select
Speed Lim. Asst..
X
Press the a button.
The multifunction display shows Speed
Limit Assist.
X
Press the : button.
The currentselection is displayed.
X
To activate or deactivate: press a.
If the Speed Limit Assist message function
is activated, a detected speed limit is auto-
matically displayed for five seconds. Other
items in the multifunction display are not
shown during this time.
If Speed Limit Assist is operational and the
message function is activated, the multifunc-
tion display shows the Ä symbol when the
ignition is switched on.
Showing the distance display
X
Press the = or ; button on the steer-
ing wheel to select the
Assist. menu.
X
Press the 9 or : button to select
Distance display.
X
Press a.
The DISTRONIC PLUS distance display
appears in the multifunction display
(Y page 157).
Deactivating/activating ESP
®
G
WARNING
If the ÷ warning lamp in the instrument
cluster flashes, proceed as follows:
R
Under no circumstances should you deac-
tivate ESP
®
.
R
When pulling away, only depress the accel-
erator pedal as far as is necessary.
R
Adapt your driving style to the prevailing
road and weather conditions.
198
Menus and submenus
On-board computer and displays
The vehicle may otherwise begin to skid.
If you drive too fast, ESP
®
cannot reduce the
risk of an accident. ESP
®
cannot override the
laws of physics.
G
WARNING
If the å warning lamp in the instrument
cluster lights up when the engine is running,
ESP
®
is deactivated or is unavailable due to a
malfunction. The risk that your vehicle may
start to skid then increases in certain situa-
tions.
Always adapt your driving style to the prevail-
ing road and weather conditions.
For further information about ESP
®
, see
(Y page 66).
X
Start the engine.
X
Press = or ; on the steering wheel
to select the
Assist.
menu.
X
Press 9 or : to select
ESP.
X
Press the a button.
X
To deactivate: press a again.
The å warning lamp in the instrument
cluster comes on.
X
To activate: press a again.
The å warning lamp in the instrument
cluster goes out.
Activating/deactivating the distance
warning signal
X
Press the = or ; button on the steer-
ing wheel to select the
Assist.
menu.
X
Press 9 or : to select
Dist.
warn‐
ing.
X
Press the a button.
The currentselection is displayed.
X
To activate/deactivate: press a
again.
When the distance warning signal is activa-
ted, the multifunction display shows the
Ä symbol if the HOLD function is not acti-
vated (Y page 162).
Vehicles with Active Parking Assist: if
PARKTRONIC is activated and you are driving
at a speed under 35 km/h, the j Active
Parking Assist symbol is shown instead of the
Ä symbol (Y page 166).
For further information on the distance warn-
ing signal, see (Y page 63).
Activating/deactivating ATTENTION
ASSIST
X
Press the = or ; button on the steer-
ing wheel to select the
Assist. menu.
X
Press the 9 or : button to select
Attention Asst.
X
Press a.
The currentselection is displayed.
X
To activate/deactivate: press a
again.
When ATTENTION ASSIST(Ypage 175) is
activated, the À symbol appears in the
multifunction display when the ignition is on.
Activating/deactivating Blind Spot
Assist
X
Press the = or ; button on the steer-
ing wheel to select the
Assist. menu.
X
Press the 9 or : button to select
Blind Spot Asst..
X
Press a.
The currentselection is displayed.
X
To activate/deactivate: press a
again.
For further information about Blind Spot
Assist, see (Y page 177).
Activating/deactivating Lane Keeping
Assist
X
Press the = or ; button on the steer-
ing wheel to select the
Assist.
menu.
X
Press the 9 or : button to select
Lane Keep. Asst.
Menus and submenus
199
On-board computer and displays
Z
X
Press a.
The currentselection is displayed.
X
Press the a button to confirm.
X
Press : or 9 to set
Off, Standard
or Adaptive.
X
Press the a button to save the setting.
If Lane Keeping Assist is activated
(Y page 180)and the ignition is switched on,
the à symbol appears in the multifunction
display.
Service menu
In the Service menu, you have the following
options:
R
call up display messages (Y page 205)
R
restarting the tyre pressure loss warning
system (Y page 297)
R
calls up when a service is due
(Y page 266)
Settings menu
Introduction
In the Settings menu, you have the following
options:
R
change the instrument cluster settings
R
change the light settings
R
change the vehicle settings
R
change the convenience settings
R
restore the factory settings
Instrument cluster
Selecting the unitofmeasurement for dis-
tance
You can determine whether the multifunction
display shows some messages in miles or kil-
ometres.
X
Press the = or ; button on the steer-
ing wheel to selectthe
Settings
menu.
X
Press the : or 9 button to select the
Inst. cluster submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Display unit Speed-/odometer: func-
tion.
You will see the selected setting:
km or
miles
.
X
Press the a button to save the setting.
The selected unit of measurement for dis-
tance applies to:
R
the digital speedometer in the
Trip
menu
R
the total distance recorder and the trip
meter
R
the trip computer
R
the current consumption and the range
R
the navigation instructions in the
Navi
menu
R
cruise control
R
SPEEDTRONIC
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Switching the additional speedometer
on/off
Only vehicles with manual transmission have
this function.
X
Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X
Press the : or 9 button to select the
Inst. cluster submenu.
200
Menus and submenus
On-board computer and displays
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Dig. speedo [mph] function.
You will see the selected setting:
on or
off.
X
Press the a button to save the setting.
i
Speed is displayed in mph.
i
Vehicles for the United Kingdom: this
function is not available.
The
Dig. speedo [mph] function allows you
to choose whether the status area in the mul-
tifunction display always shows the speed in
mph instead of the outside temperature.
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X
Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X
Press the : or 9 button to select the
Inst. cluster submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Permanent display: function.
You will see the selected setting:
outside
temperature or Dig. speedom [mph].
X
Press the a button to save the setting.
i
Speed is displayed in mph.
i
Vehicles for the United Kingdom: this
function is not available.
Lights
Switching the daytime driving lights on/
off
X
Switch off the engine.
X
Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X
Press the : or 9 button to select the
Light submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Daytime driving lights: function.
You will see the selected setting:
on or
off
.
X
Press the a button to save the setting.
Further information on daytime driving lights
(Y page 97).
Switching the Intelligent Light System
on/off
X
Press the = or ; button on the steer-
ing wheel to select the
Settings
menu.
X
Press the : or 9 button to select the
Light submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Intell. Light System: function.
You will see the selected setting:
on or
off.
X
Press the a button to save the setting.
When you activate the
Intell. Light Sys‐
tem: function, you activatethe following:
R
motorway mode
R
active light function
R
cornering light function
R
extended range foglamps
If you set the dipped-beamheadlamps for
driving on the right/left (Y page 201), the
multifunction display shows the
Intell.
Light System: System inoperative
Inactive for left-side traffic or
Intell.
Light System: System inoper‐
ative Inactive for right-side traf‐
fic display message instead of the Intell.
Light System: function in the Light sub-
menu.
Setting the dipped-beam headlamps for
driving on the left/right
X
Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X
Press the : or 9 button to select the
Light submenu.
X
Press the a button to confirm.
Menus and submenus
201
On-board computer and displays
Z
X
Press : or 9 to select the
Dipped
headl. Setting for: function.
You will see the selected setting:
Right-
side traffic or Left-side traffic.
X
Press the a button to save the setting.
When you change the setting, conversion
does not take place until the next time the
vehicle is stationary.
This function is only available on vehicles with
the Intelligent Light System.
You can use this function to switch between
symmetrical and asymmetrical dipped beam
(Y page 96).
If you set the dipped-beam headlamps for
driving on the right/left, then motorway
mode and the extended range foglamps are
not available.
You can also have the dipped-beam head-
lamps set for driving on the right/left at a
qualified specialist workshop, e.g. a
Mercedes-Benz Service Centre.
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X
Press the : or 9 button to select the
Light submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Adaptive Main-beam Assist:
function.
You will see the selected setting:
Activa‐
ted or Deactivated.
X
Press the a button to save the setting.
Activating/deactivating the surround
lighting and exterior lighting delayed
switch-off
If you have activated the
Surround light‐
ing: function and the light switch is set to
Ã, the following functions are activated
when it is dark:
R
Surround lighting: the exterior lighting
remains lit for 40 seconds after unlocking
with the key. If you start the engine, the
surround lighting is switched off and auto-
matic headlamp mode is activated
(Y page 97).
R
Exterior lighting delayed switch-off: the
exterior lighting remains lit for 60seconds
after the engine is switched off. If you close
all the doors and the tailgate, the exterior
lighting goes off after 15 seconds.
X
Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X
Press the : or 9 button to select the
Light submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Surround lighting:
function.
You will see the selected setting:
on
or
off.
X
Press the a button to save the setting.
Deactivating delayed switch-off of the exte-
rior lighting temporarily:
X
Before leaving the vehicle, turn the key to
position 0 in the ignition lock.
X
Turn the key to position 2 in the ignition
lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
i
Depending on your vehicle's equipment,
when the surround lighting and delayed
switch-off exterior lighting are on, the fol-
lowing light up:
R
side lamps
R
foglamps
R
dipped-beam headlamps
R
daytime driving lights
R
surround lighting in the exterior mirrors
Activating/deactivating the interior light-
ing delayed switch-off
If you activate the
Interior lighting
delay sw. off: function, the interior light-
202
Menus and submenus
On-board computer and displays
ing remains on for 20 seconds after you
remove the key from the ignition lock.
X
Press the = or ; button on the steer-
ing wheel to selectthe
Settings menu.
X
Press the : or 9 button to select the
Light submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Interior lighting delay sw. off:
function.
You will see the selected setting:
on
or
off.
X
Press the a button to save the setting.
Vehicle
Setting permanent SPEEDTRONIC
X
Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X
Press the : or 9 button to select the
Vehicle submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Limit
speed (winter tyres): function.
You will see the current setting.
X
Press the a button to confirm.
X
Press the : or 9 button to adjust
permanent SPEEDTRONIC in increments of
ten (
230 km/h to 160 km/h). The Off set-
ting switches permanent SPEEDTRONIC
off.
X
Press the a button to store the entry.
You can set permanent SPEEDTRONIC
(Y page 154) using the
Limit speed (win‐
ter tyres): function.
Switching the automatic locking feature
on/off
X
Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X
Press the : or 9 button to select the
Vehicle submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Automatic door locks: function.
You will see the selected setting:
on or
off
.
X
Press the a button to save the setting.
If you select the
Automatic door locks:
function, the vehicle is centrally locked above
a speed of around 15 km/h.
i
For further information on the automatic
locking feature, see (Y page 77).
Activating/deactivating the acoustic
locking confirmation
If you switch on the
Acoustic Lock feed‐
back function, an acoustic signal sounds
when you lock the vehicle.
X
Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X
Press the : or 9 button to select the
Vehicle submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Acoustic Lock feedback function.
You will see the selected setting:
Activa‐
ted or Deactivated.
X
Press the a button to save the setting.
Activating/deactivating the radar sensor
system
X
Press the = or ; button on the steer-
ing wheel to select the
Settings menu.
X
Press the : or 9 button to select the
Vehicle submenu.
X
Press the a button to confirm.
X
Press the 9 or : button to select
Radar sensor (See Owner's Man.)
.
You will see the selected setting:
on
or
off.
X
Press the a button to save the setting.
i
You must deactivate the radar sensor sys-
tem in certain countries and near radio
telescope facilities. For further informa-
tion, see (Y page 320).
Menus and submenus
203
On-board computer and displays
Z
If the radarsensor system is switched off,
Blind Spot Assist is deactivated
(Y page 177).
Convenience
Switching the belt adjustment on/off
X
Press the = or ; button on the steer-
ing wheel to select the
Settings
menu.
X
Press the : or 9 button to select the
Convenience submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Belt adjustment: function.
You will see the selected setting:
Activa‐
ted or Deactivated.
X
Press the a button to save the setting.
For further information on belt adjustment,
see (Y page 45).
Switching on/off the fold in mirrors when
locking function
X
Press the = or ; button on the steer-
ing wheel to select the
Settings
menu.
X
Press the : or 9 button to select the
Convenience submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Fold mirrors in when locking: func-
tion.
You will see the selected setting:
on or
off.
X
Press the a button to save the setting.
If you switch on the
Fold mirrors in when
locking: function, the exterior mirrors fold
in when you lock the vehicle. When you
unlock the vehicle and then open the driver's
or front-passenger door, the exterior mirrors
fold out again.
If you have switched the function on and you
fold the exterior mirrorsinusing the button
on the door (Y page 92), they will not fold out
automatically. The exterior mirrors can then
only be folded out using the button on the
door.
Resetting to factory settings
X
Press the = or ; button on the steer-
ing wheel to select the
Settings
menu.
X
Press the : or 9 button to select the
Factory setting submenu.
X
Press the a button to confirm.
The
Reset all settings? message
appears.
X
Press the : or 9 button to select
No or Yes.
X
Press the a button to confirm the selec-
tion.
If you have selected
Yes, the multifunction
display shows a confirmation message.
For safety reasons, not all functions are reset:
the
Limit speed (winter tyres): func-
tion in permanent SPEEDTRONIC can only be
set in the
Vehicle
submenu. If you want to
reset the
Daytime driving lights: in the
Light submenu, you must turn the key in the
ignition lock to position 1.
204
Menus and submenus
On-board computer and displays

Related Topics

On-board computer and displays
Useful information Important safety notes Displays and operation Display messages Warning and indicator lamps in the instrument cluster

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot