2011-2017 Mercedes B Class SUV Lights and windshield wipers -> Exterior lighting User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lights and windshield wipers -> Exterior lighting for Your Mercedes B Class SUV Second Generation (2011-2017)

Exterior lighting
General notes
For reasons of safety, Mercedes-Benz recom-
mends that you drive with the lights switched on
even during the daytime. In some countries,
operation of the headlamps varies due to legal
requirements and self-imposed obligations.
Setting the exterior lighting
Setting options
Exterior lighting can be set using the:
R
light switch
R
combination switch (Y page 88)
R
on-board computer (Y page 166)
Light switch
Operation
1 W
Left-hand standing lamps
2 X
Right-hand standing lamps
3 T
Parking lamps, license plate and
instrument cluster lighting
4 Ã
Automatic headlamp mode, controlled
by the light sensor
5L
Low-beam/high-beam headlamps
B R
Rear fog lamp
If you hear a warning tone when you leave the
vehicle, the lights may still be switched on.
X
Turn the light switch to the à position.
The exterior lighting (except the parking/stand-
ing lamps) switches off automatically if you:
R
remove the SmartKey from the ignition lock
R
open the driver's door with the SmartKey in
position 0 in the ignition lock
Automatic headlamp mode
à is the favored light switch setting. The light
setting is automatically selected according to
the brightness of the ambient light (exception:
poor visibility due to weather conditions such as
fog, snow or spray):
R
SmartKey in position 1 in the ignition lock: the
parking lamps are switched on/off automat-
ically depending on the brightness of the
ambient light.
R
With the drive system running: if you have
switched on the
Daytime Running LightsDaytime Running Lights
function in the on-board computer, the day-
time running lamps or the parking lamps and
low-beam headlamps are switched on or off
automatically depending on the brightness of
the ambient light.
X
To switch on the automatic headlamp
mode: turn the light switch to the à posi-
tion.
G
WARNING
When the light switch is set to Ã, the low-
beam headlamps may not be switched on
automatically if there is fog, snow or other
causes of poor visibility due to the weather
conditions such as spray. There is a risk of an
accident.
In such situations, turn the light switch to
L.
The automatic headlamp feature is only an aid.
The driver is responsible for the vehicle's light-
ing at all times.
The daytime running lamps improve the visibility
of your vehicle during the day. To do this, the
daytime running lamps function must be
switched on using the on-board computer
(Y page 166).
If the drive system is switched on and you turn
the light switch to T or L, the manual
settings take precedence over the daytime run-
ning lamps.
Low-beam headlamps
Even if the light sensor does not detect that it is
dark, the parking lamps and low-beam head-
lamps come on when the ignition is switched on
and the light switch is set to the L position.
This is a particularly useful function in the event
of rain and fog.
Exterior lighting
87
Lights and windshield wipers
Z
X
To switch on the low-beam headlamps:
turn the SmartKey in the ignition lock to posi-
tion 2 or start the drive system.
X
Turn the light switch to L.
The green L indicator lamp in the instru-
ment cluster lights up.
Rear fog lamp
The rear fog lamp improves visibility of your
vehicle for the traffic behind in the event of thick
fog. Please take note of the country-specific
regulations for the use of rear fog lamps.
X
To switch on the rear fog lamp: turn the
SmartKey in the ignition lock to position 2 or
start the drive system.
X
Turn the light switch to L or Ã.
X
Press the R button.
The yellow R indicator lamp in the instru-
ment cluster lights up.
X
To switch off the rear fog lamp: press the
R button.
The yellow R indicator lamp in the instru-
ment cluster goes out.
Parking lamps
!
If the battery charge level is very low, the
parking lamps or standing lamps are switched
off automatically in order to preserve energy
to start the drive system. Always park your
vehicle safely and sufficiently lit according to
legal standards. Avoid using the parking
lamps T for periods of several hours.
Where possible, switch the right-hand X
or left-hand W standing lamp on.
X
To switch on: turn the light switch to T.
The green T indicator lamp in the instru-
ment cluster lights up.
Standing lamps
Switching on the standing lamps ensures the
corresponding side of the vehicle is illuminated.
X
To switch on the standing lamps: the
SmartKey should not be in the ignition lock or
it should be in position 0.
X
Turn the light switch to W (left-hand side of
the vehicle) or X (right-hand side of the
vehicle).
Combination switch
X
To indicate briefly: press the combination
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
X
To indicate: press the combination switch
beyond the pressure point in the direction of
arrow ; or ?.
X
To switch on the high-beam headlamps:
turn the light switch to L or Ã.
X
Press the combination switch beyond the
pressure point in the direction of arrow :.
The high-beam headlamps only switch on in
the à position if the low-beam headlamps
are on.
The blue K indicator lamp in the instru-
ment cluster lights up when the high-beam
headlamps are switched on.
X
To switch off the high-beam head-
lamps:move the combination switch back to
its normal position.
The blue K indicator lamp in the instru-
ment cluster goes out.
X
To switch on the high-beam flasher: pull
the combination switch in the direction of
arrow =.
88
Exterior lighting
Lights and windshield wipers
Hazard warning lamps
X
To switch on the hazard warning lamps:
press button :.
All turn signals flash. If you now switch on a
turn signal using the combination switch, only
the turn signal lamp on the corresponding
side of the vehicle will flash.
X
To switch off the hazard warning lamps:
press button :.
The hazard warning lamps automatically switch
on if:
R
an air bag is deployed or
R
the vehicle decelerates rapidly from a speed
of above 45 mph (70 km/h) and comes to a
standstill
The hazard warning lamps switch off automati-
cally if the vehicle reaches a speed of above
6 mph (10 km/h) again after a full brake appli-
cation.
The hazard warning lamps still operate if the
ignition is switched off.
Cornering light function
The cornering light function improves the illu-
mination of the road over a wide angle in the
direction you are turning, enabling better visi-
bility in tight bends, for example. It can only be
activated when the low-beam headlamps are
switched on.
Active:
R
if you are driving at speeds below 25 mph
(40 km/h) and switch on the turn signal or
turn the steering wheel
R
if you are driving at speeds between 25 mph
(40 km/h) and 45 mph (70 km/h) and turn
the steering wheel
The cornering lamp may remain lit for a short
time, but is automatically switched off after no
more than three minutes.
Headlamps fogged up on the inside
Certain climatic and physical conditions may
cause moisture to form in the headlamp. This
moisture does not affect the functionality of the
headlamp.
Interior lighting
Overview of interior lighting
Front overhead control panel
:
p Switches the left-hand front reading
lamp on or off
;
c Switches the front interior lighting on
=
v Switches the rear interior lighting on or
off
?
| Switches the front interior lighting/
automatic interior lighting control off
A
p Switches the right-hand front reading
lamp on or off
B
Switches the automatic interior lighting con-
trol on
Interior lighting
89
Lights and windshield wipers
Z

Related Topics

Popular Owner Manuals