Get Opening and closing -> Side windows Guide for Mercedes B Class SUV Second Generation (2011-2017)

Pull the tailgate down using handle :.

Allow the tailgate to drop into the lock.

If necessary, lock the vehicle with the &

button on the SmartKey or with KEYLESS-GO.

Tailgate emergency release

General notes

The tailgate swings upwards and to the rear

when opened. Therefore, make sure that

there is sufficient clearance above and behind

the tailgate.

The opening dimensions of the tailgate can be

found in the "Vehicle data" section

(Y page 286).

If the tailgate can no longer be unlocked:

using the SmartKey, or

using the remote operating switch in the door

control panel:

Use the emergency release on the inside of the

tailgate.

You can reach the emergency release via the

cargo compartment.

Opening

Remove cargo compartment cover

(Y page 213).

Fold the rear seat backrest forwards

(Y page 211).

Take the mechanical key out of the SmartKey

(Y page 68).

Insert mechanical key ; into opening : in

the trim and push it in.

Open the tailgate.

Insert the mechanical key into the SmartKey

(Y page 68).

Side windows

Important safety notes

WARNING

While opening the side windows, body parts

could become trapped between the side win-

dow and the door frame as the side window

moves. There is a risk of injury.

Make sure that nobody touches the side win-

dow during the opening procedure. If some-

body becomes trapped, release the switch or

pull the switch to close the side window again.

WARNING

While closing the side windows, body parts in

the closing area could become trapped. There

is a risk of injury.

When closing make sure that no parts of the

body are in the closing area. If somebody

becomes trapped, release the switch or press

the switch to open the side window again.

WARNING

If children operate the side windows they

could become trapped, particularly if they are

left unsupervised. There is a risk of injury.

Activate the override feature for the rear side

windows. When leaving the vehicle, always

take the SmartKey with you and lock the vehi-

cle. Never leave children unsupervised in the

vehicle.

Side window reversing feature

The side windows are equipped with an auto-

matic reversing feature. If a solid object blocks

or restricts a side window from traveling

upwards during the automatic closing process,

the side window opens again automatically. Dur-

ing the manual closing process, the side window

only opens again automatically after the corre-

sponding switch is released. The automatic

reversing feature is only an aid and is no substi-

tute for your attention when closing a side win-

dow.

Side windows

Opening and closing

WARNING

The reversing feature does not react:

to soft, light and thin objects, e.g. small fin-

gers

while resetting

This means that the reversing feature cannot

prevent someone being trapped in these sit-

uations. There is a risk of injury.

Make sure that no body parts are in close

proximity during the closing procedure. If

someone becomes trapped, press the switch

to open the side window again.

Opening and closing the side win-

dows

The switches for all side windows are located on

the driver's door. There is also a switch on each

door for the corresponding side window.

The switches on the driver's door take prece-

dence.

Front left

;

Front right

Rear right

Rear left

Turn the SmartKey to position 1 or 2 in the

ignition lock (Y page 109).

To open manually: press and hold the cor-

responding switch.

To open fully: press the switch beyond the

point of resistance and release it.

Automatic operation is started.

To close manually: pull the corresponding

switch and hold it.

To close fully: pull the switch beyond the

point of resistance and release it.

Automatic operation is started.

To interrupt automatic operation: press/

pull the corresponding switch again.

If you press/pull the switch beyond the

point of resistance, automatic operation is

started in the corresponding direction. You

can stop automatic operation by pressing/

pulling the switch again.

You can continue to operate the side win-

dows after switching off the drive system or

removing the SmartKey. This function is avail-

able for up to five minutes or until the driver's

or front-passenger door is opened.

When the override feature for the side win-

dows is activated (Y page 58), the side win-

dows cannot be operated from the rear.

Convenience opening

Vehicles with KEYLESS-GO or the Exclusive

package: you can ventilate the vehicle before

you start driving.

The SmartKey can also be used to carry out the

following functions simultaneously:

unlock the vehicle

open the side windows

The convenience opening feature can only be

operated using the SmartKey.

The "convenience opening" feature is also avail-

able when the vehicle is unlocked.

Vehicles with the Exclusive package but

without KEYLESS-GO: for the following

operations, point the tip of the SmartKey at

the door handle on the driver's door. The

SmartKey must be close to the driver's door

handle.

Vehicles with KEYLESS-GO: the SmartKey

must be in close proximity to the vehicle.

Press and hold the % button until the side

windows reach the desired position.

To interrupt convenience opening: release

the % button.

Side windows

Opening and closing

Convenience closing feature

Important safety notes

WARNING

When using the convenience closing feature,

parts of the body could be trapped in the clos-

ing area when a side window is being closed.

There is a risk of injury.

Observe the complete closing procedure

when the convenience closing feature is oper-

ating. Make sure that no body parts are in

close proximity during the closing procedure.

Vehicles with KEYLESS-GO or the Exclusive

package: when you lock the vehicle, you can

close the side windows at the same time.

Notes on the automatic reversing feature for

the side windows (Y page 75).

Using the SmartKey

Vehicles with the Exclusive package but

without KEYLESS-GO: for the following

operations, point the tip of the SmartKey at

the door handle on the driver's door. The

SmartKey must be close to the driver's door

handle.

Vehicles with KEYLESS-GO: the SmartKey

must be in close proximity to the vehicle.

Press and hold the & button until the side

windows are fully closed.

To interrupt convenience closing: release

the & button.

Using KEYLESS-GO

The driver's door and the door at which the han-

dle is used, must both be closed. The SmartKey

must be outside the vehicle. The gap between

the SmartKey and the corresponding door han-

dle should not be greater than 3 ft (1 m).

Touch recessed sensor surface : on the

door handle until the side windows are fully

closed.

Make sure you only touch recessed sensor

surface :.

Make sure that all the side windows are

closed.

To interrupt convenience closing: release

recessed sensor surface : on the door han-

dle.

Resetting the side windows

If a side window can no longer be closed fully,

you must reset it.

Close all the doors.

Turn the SmartKey to position 1 or 2 in the

ignition lock (Y page 109).

Pull the corresponding switch on the door

control panel until the side window is com-

pletely closed (Y page 76).

Hold the switch for an additional second.

If the side window opens again slightly:

Immediately pull the corresponding switch on

the door control panel until the side window is

completely closed (Y page 76).

Hold the switch for an additional second.

If the respective side window remains closed

after the button is released, then it has been

set correctly. If this is not the case, repeat the

steps above again.

Side windows

Opening and closing

Problems with the side windows

WARNING

If you close a side window again immediately after it has been blocked or reset, the side window

closes with increased or maximum force. The reversing feature is then not active. Parts of the

body could be trapped in the closing area in the process. This poses an increased risk of injury or

even fatal injury.

Make sure that no parts of the body are in the closing area. To stop the closing process, release

the switch or push the switch again to reopen the side window.

Problem

Possible causes/consequences and MM Solutions

A side window cannot be

closed because it is

blocked by objects, e.g.

leaves in the window

guide.

Remove the objects.

Close the side window.

A side window cannot be

closed and you cannot

see the cause.

If a side window is obstructed during closing and reopens again

slightly:

Immediately after the window blocks, pull the corresponding switch

again until the side window has closed.

The side window is closed with increased force.

If a side window is obstructed again during closing and reopens again

slightly:

Immediately after the window blocks, pull the corresponding switch

again until the side window has closed.

The side window is closed without the automatic reversing feature.

Side windows

Opening and closing

Opening and closing -> Side windows for Your Mercedes B Class SUV Second Generation (2011-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals