#
Switching intermittent wiping on/o: press
button 2.
The è symbol will appear on the driver's
display when the rear window wiper is
switched on.
Replacing the windscreen wiper blades
&
WARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
#
Always switch o the windscreen wipers
and vehicle before changing the wiper
blades.
Moving the wiper arms into the replacement posi-
tion
#
Switch the vehicle on and then o again
immediately.
#
Within around 15 seconds, press and hold the
î button on the combination switch for
approximately three seconds (/ page 224).
The wiper arms will move into the replacement
position.
%
Check the condition of the wiper blades regu-
larly and replace them in the event of visible
damage or ongoing smearing.
#
Observe the information about the service
indicator.
Service indicator
#
Remove protective lm 1 from the service
indicators on the tips of the newly tted wiper
blades.
When the colour of the service indicators changes
from black to yellow, replace the wiper blades.
%
The time until the colour changes varies
depending on the usage conditions.
Light and sight
225
F247 0072 02
English 
