X
Make sure that the SmartKey is in
position 2 in the ignition lock.
X
With the exterior mirror on the front-
passenger side activated, use adjustment
button = to adjust the exterior mirror. In
the exterior mirror, the rear wheel and the
curb should be visible.
X
Press memory button M ? and one of the
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position
setting
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Adjust the exterior mirror on the front-
passenger side using button ;.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of 9mph
(15 km/h)
R
if you press button : for the exterior
mirror on the driver's side
Memory function
Storing settings
G
WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic
conditions by the seat moving of its own
accord, and as a result cause an accident.
With the memory function, you can store up
to three different settings, e.g. for three
differentpeople.
The following settings are stored as a single
memory preset:
R
position of the seat, backrest and head
restraint
R
driver's side: steering wheel position
R
driver's side: position of the exterior
mirrors on the driver's and front-passenger
sides
X
Adjust the seat (Y page 96).
X
On the driver's side, adjust the steering
wheel (Y page 102)and the exteriormirrors
(Y page 103).
X
Briefly press the M memory button and
thenpress storage position button 1, 2 or
3 withinthree seconds.
The settings are stored in the selected
preset position. Atone sounds when the
settings have been completed.
Calling up astoredsetting
!
If you want to move the seat from the fully
reclined position to a stored seat position,
first raise the backrest. The seat could
otherwise be damaged.
X
Press and hold the relevant storage
position button 1, 2 or 3 until the seat,
steering wheel and exteriormirrors are in
the stored position.
106
Memory function
Seats, steering wheel and mirrors
English 
