2014-2021 Mercedes C Class 4 Door Seats and stowing -> Sockets User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seats and stowing -> Sockets for Your Mercedes C Class 4 Door Fourth Generation (2014-2021)

Seats and stowing 115  
#
#
#
Secure the roof luggage rack to the fastening  
points beneath covers 1.  
Comply with the installation instructions of  
the roof luggage rack manufacturer.  
Secure the load on the roof luggage rack.  
Sockets  
Using the 12 V socket  
Requirements:  
Example: 12 V socket in the stowage compartment  
in the front centre console  
R
Only devices up to a maximum of 180 W  
(15 A) are permissible.  
#
Fold up socket cap 1.  
Depending on the vehicle equipment, the vehicle  
has the following 12 V sockets:  
#
Insert the plug of the device.  
If you have connected a device to the 12 V  
socket, leave the cover of the stowage compart‐  
ment open.  
R
In the stowage compartment in the front  
centre console  
NOTE Damage to the covers  
*
The covers may be damaged and scratched  
when being opened.  
R
In the stowage compartment in the centre  
console of the rear passenger compartment  
#
Do not use metallic or hard objects.  
#
Carefully fold covers 1 upwards in the  
direction of the arrow.  
116 Seats and stowing  
Using the 230 V socket in the rear passenger  
compartment  
&
DANGER Risk of fatal injury due to incor‐  
rect handling of the socket  
You could receive an electric shock in partic‐  
ular:  
&
DANGER Risk of fatal injury due to dam‐  
aged connecting cables or sockets  
R
if you reach into the socket.  
if you insert unsuitable devices or objects  
into the socket.  
You could receive an electric shock if the  
connecting cable or the 230 V power socket  
is pulled out of the trim or is damaged or  
wet.  
R
#
Do not reach into the socket.  
Only connect suitable devices to the  
socket.  
#
Use only connecting cables that are dry  
and free of damage.  
#
#
When the ignition is switched off, make  
sure that the 230 V power socket is dry.  
Requirements:  
#
Immediately have the 230 V power  
R
Devices are equipped with a suitable plug  
which conforms to the standards specific to  
the country you are in.  
A device up to a maximum of 150 W (0.65 A)  
is used.  
socket checked or replaced at a quali‐  
fied specialised workshop if it is dam‐  
aged or has been pulled out of the trim.  
#
#
Open flap 3.  
Insert the plug of the device into 230 V  
socket 1.  
R
#
Never plug the connecting cable into a  
230 V power socket that is damaged or  
has been pulled out of the trim.  
When the on-board electrical system voltage  
is sufficient, indicator lamp 2 lights up.  
R
Do not use multiple socket outlets.  

Related Topics

Popular Owner Manuals