Get Light and visibility -> Exterior lighting Guide for Mercedes CLA 4 Door Second Generation (2019-2024)

The exterior lighting (except standing and parking

lights) will switch o automatically when the driv-

er's door is opened.

Observe the notes on surround lighting

(/ page 119).

Aututomatic dromatic driving lights functioniving lights function

When the vehicle is switched on, the parking

lamps, low beam and daytime running lamps are

switched on automatically depending on the ambi-

ent light.

WARNINGARNING Risk of accident when the low

beam is switched o in poor visibility

When the light switch is set to Ã, the low

beam may not be switched on automatically if

there is fog, snow or other causes of poor visi-

bility such as spray.

In such cases, turn the light switch to

The automatic driving lights are only an aid. You

are responsible for vehicle lighting.

Switc

Switching thing the rhe rear fear fog lights on orog lights on or oo

RReqequiruirements:ements:

The light switch is in the L or Ã posi-

tion.

Press the R button.

Please observe the country-specic laws on the

use of rear fog lamps.

OperOperating tating the combination switche combination switch fh for tor the lightshe lights

High beam

Turn signal light, right

High-beam asher

Turn signal light, le

Use the combination switch to activate the

desired function.

Light and visibility

115

SwitcSwitching on high beamhing on high beam

Turn the light switch to the L or Ã

position.

Push the combination switch in the direction

of arrow 1.

When the high beam is activated, the L

indicator lamp for low beam will be deactiva-

ted and replaced by the K indicator lamp

for high beam.

Switc

Switchinghing oo high beamhigh beam

Push the combination switch in the direction

of arrow 1 or pull it in the direction of arrow

High-beam

High-beam asherasher

Pull the combination switch in the direction of

arrow 3.

Tururn signal lightn signal light

TTo indicato indicatee brbriey:iey: push the combination

switch briey to the point of resistance in the

direction of arrow 2 or 4.

The corresponding turn signal light will ash

three times.

TTo indicato indicate continuouslye continuously:: push the combina-

tion switch beyond the point of resistance in

the direction of arrow 2 or 4.

Vehicles with Active Lane Change Assist:

A turn signal indicator activated by the

driver may continue to operate for the

duration of the lane change.

If the driver indicated directly beforehand

but a lane change was not immediately

possible, the turn signal indicator may acti-

vate automatically.

AActivctivating/deactivating/deactivating tating the hazarhe hazard wd wararning lightsning lights

Press button 1.

The hazard warning lights will switch on automati-

cally if:

The airbag has been deployed.

116116

Light and visibility

CorCornernering lighting light

CorCornernering light functioning light function

The cornering light improves the illumination of

the road over a wide angle in the turning direc-

tion, enabling better visibility on tight curves, for

example. It can be activated only when the low

beam is switched on.

The function is active in the following cases:

At speeds below 25 mph (40 km/h) when the

turn signal light is switched on or the steering

wheel is turned

At speeds between 25 mph (40 km/h) and

43 mph (70 km/h) and when the steering

wheel is turned

Roundabout and intoundabout and interersection function:section function: the corner-

ing light will be activated on both sides based on

an evaluation of the vehicle's current GPS posi-

tion. It will remain active until aer the vehicle has

le the roundabout or the intersection.

AActivctive headlame headlampsps

AActivctive headlame headlamps functionps function

The headlamps follow the steering move-

ments.

Relevant areas are better illuminated during a

journey.

The functions are active when the high beam is

switched on.

AAdapdaptivtive Highbeam Assiste Highbeam Assist

AAdapdaptivtive Highbeam Assise Highbeam Assist functiont function

WARNINGARNING Risk of accident despite Adap-

tive Highbeam Assist

Adaptive Highbeam Assist does not react to:

Road users without lights, e.g. pedestrians

Road users with poor lighting, e.g. cyclists

Road users whose lighting is obstructed,

e.g. by a barrier

On very rare occasions, Adaptive Highbeam

Assist may fail to recognize other road users

with their own lighting, or may recognize them

too late.

In these, or in similar situations, the automatic

high beam will not be deactivated or will be

Light and visibility

117

activated despite the presence of other road

users.

Always observe the road and trac con-

ditions carefully and switch o the high

beam in good time.

Adaptive Highbeam Assist cannot take into

account road, weather or trac conditions.

Detection may be restricted in the following

cases:

In poor visibility, e.g. fog, heavy rain or snow

If there is dirt on the sensors or the sensors

are obscured

Adaptive Highbeam Assist is only an aid. You are

responsible for adjusting the vehicle's lighting to

the prevailing light, visibility and trac conditions.

Adaptive Highbeam Assist automatically switches

between the following types of light:

Low beam

High beam

At speeds greater than 19 mph (30 km/h):

If no other road users are detected, the high

beam will switch on automatically.

The high beam will switch o automatically in the

following cases:

At speeds below 16 mph (25 km/h)

If other road users are detected

If street lighting is sucient

The system's optical sensor is located behind

the windshield near the overhead control

panel.

Switc

Switching Ahing Adapdaptivtive Highbeam Assise Highbeam Assistt on/oon/o

SwitcSwitching onhing on

Turn the light switch to the Ã position.

Switch on the high beam using the combina-

tion switch.

If Adaptive Highbeam Assist is activated,

the _ indicator lamp will light up on the

central display section of the instrument dis-

play.

Switc

Switchinghing oo

Switch o the high beam using the combina-

tion switch.

118118

Light and visibility

SeSetting ttting the ehe extxtererior lightingior lighting switcswitch-oh-o deladelay timey time

RReqequiruirements:ements:

The light switch is in the Ã position.

Multimedia system:

Settings

Light

Exterior Lighting Delay

Set the switch-o delay time.

When the vehicle engine is switched o, the

exterior lighting will be activated for the set

time.

SwitcSwitching thing the surrhe surround lightingound lighting on/oon/o

Multimedia system:

Settings

Light

Locator Lighting

When Locator Lighting is active, the exterior light-

ing lights up for 40 seconds aer the vehicle is

unlocked. When you start the vehicle, the sur-

round lighting is deactivated and the automatic

driving lights are activated.

Activate or deactivate the function.

IntIntererior lightingior lighting

AAdjusdjusting tting the inthe intererior lightingior lighting

FFrront ovont overerhead contrhead control panelol panel

p Front le reading lamp

| Automatic interior lighting control

c Front interior lighting

u Rear interior lighting

p Front right reading lamp

TTo switco switchh on/o:on/o: press button 1 – 5

accordingly.

ContrControl panel in tol panel in the grhe grab handleab handle

p Rear reading lamp

TTo switco switchh on/o:on/o: press button 1.

AAdjusdjusting tting the ambient lightinghe ambient lighting

Multimedia system:

Comfort

Ambient Lighting

SeSetting ttting the colorhe color

Select Color.

Set the desired color.

Light and visibility

119

Light and visibility -> Exterior lighting for Your Mercedes CLA 4 Door Second Generation (2019-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals