2025-2026 Mercedes CLA 4 Door Driving and parking -> DYNAMIC SELECT User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving and parking -> DYNAMIC SELECT for Your Mercedes CLA 4 Door Third Generation (2025-2026)

R
If the windshield is dirty in the vicinity of the
multifunction camera.
R
If the multifunction camera is fogged up, dam-
aged or obscured.
R
If road signs are hard to detect, e.g. due to
dirt, snow or insucient lighting, or because
they are obscured.
R
If the information in the navigation system's
digital map is incorrect or out of date.
R
If signs are ambiguous, e.g. road signs in road-
works or in adjacent lanes.
R
If the radar sensors are dirty or obscured.
R
When you drive on roads with steep uphill or
downhill gradients.
R
If there are narrow vehicles in front, such as
bicycles or motorcycles.
DYNAMIC SELECT
Function of DYNAMIC SELECT
*
NOTE Mercedes-AMG vehicles
#
Observe the notes in the Supplement.
You could otherwise fail to recognize
dangers.
DYNAMIC SELECT makes the quick selection of a
drive program possible in accordance with the
current driving situation or the desired vehicle
characteristics. You can select from the following
drive programs.
%
Depending on the engine and equipment, the
vehicle has dierent drive programs.
The drive program selected appears in the driver's
display.
=
Individual
R
Individual settings (/ page 149)
C
Sport
R
The maximum drive output is available
R
Sporty driving
R
Sporty, but with an emphasis on stability
R
Enables a sporty driver to adopt a more active
driving style
R
Only suitable for good road conditions, a dry
road surface and a clear stretch of road
A
Comfort
R
Comfortable and economical driving
R
Balance between traction and stability
R
Recommended for all road conditions
;
Eco
R
Particularly economical driving
R
Balance between traction and stability
R
Recommended for all road conditions
%
The ESP
®
settings in drive programs ;
and A are designed for stability. Therefore,
choose one of these drive programs espe-
cially when transporting roof loads, in trailer
operation and when the vehicle is fully loaded
or fully occupied.
148
Driving and parking
Depending on the drive program, the following
systems will change their characteristics:
R
Drive
-
engine and transmission management
-
Active Distance Assist DISTRONIC
-
availability of Glide mode
R
ESP
®
R
Vehicles with adaptive damping adjustment:
suspension
R
Steering
Selecting the drive program
#
Press DYNAMIC SELECT button 1 as many
times as necessary until the selected drive
program is displayed in the driver's display.
or
#
Press DYNAMIC SELECT button 1 and select
the drive program in the DYNAMIC SELECT
menu on the central display.
Conguring DYNAMIC SELECT in the multimedia
system
Multimedia system:
4
©
5
Settings
5
Vehicle
5
DYNAMIC SELECT
Setting drive program I
#
Select = Individual.
#
Select and set a category.
%
A sporty ESP mode can be set in conjunction
with a sporty suspension mode.
Switching the reset display on/o
#
Switch Request at Start on or o.
%
This function must be activated for each user
prole separately. Only when this function is
activated will the drive program and ECO
start/stop setting for the previous journey be
saved for the respective user prole.
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an additional
Driving and parking
149
prompt appears asking if the function should
remain deactivated.
%
The prompt appears only if the previously
active settings deviate from the standard set-
tings.
Function o: the next time the vehicle is started
the A drive program is set automatically. The
ECO start/stop function is activated automati-
cally.
Displaying vehicle data
Multimedia system:
4
©
5
Info
#
Select Vehicle.
The vehicle data is displayed.
Displaying engine data
Multimedia system:
4
©
5
Info
#
Select Engine.
The engine data is displayed.
%
The actual maximum values that can be ach-
ieved for engine output and engine torque
may deviate from the certied values within
the country-specic guidelines for permissible
tolerances (basis: UN-ECE No. 85 or country-
specic guidelines).
Variables that can inuence this are, for
example:
R
Sea level
R
Fuel quality
R
Outside temperature
R
Operating temperature of the engine
Adjust your driving style accordingly.
The p warning lamp in the driver's display
is on until the engine has reached operating
temperature.
%
The values displayed serve only as orienta-
tion. The values for engine output and engine
torque shown in the media display may devi-
ate from the actual values.
%
The p warning lamp to show the power
output limitation aer starting the vehicle is
not available in all vehicle models.
Calling up the fuel consumption indicator
Multimedia system:
4
©
5
Info
#
Select Consumption.
The current and average fuel consumption will
be displayed.
Automatic transmission
DIRECT SELECT lever
▌Function of the DIRECT SELECT lever
&
WARNING Risk of accident due to incor-
rect gearshiing
If the engine speed is higher than the idle
speed and you engage the transmission posi-
tion h or k, the vehicle may accelerate
sharply.
#
If you engage the transmission position
h or k when the vehicle is at a stand-
still, always depress the brake pedal
150
Driving and parking

Related Topics

Popular Owner Manuals