1990-2018 Mercedes G Class SUV Driving and parking -> Off-road driving systems User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving and parking -> Off-road driving systems for Your Mercedes G Class SUV Third Generation (1990-2018)

Activating/deactivating the rear view
camera
:
Rear view camera
X
To activate: make sure that the SmartKey
is in position 2 in the ignition lock.
X
Make sure that the rear view camera
function is selected in COMAND (see the
separate operating instructions for
COMAND).
X
Engage reverse gear.
The area behind the vehicle is shown with
guide lines and "Reverse parking"
function : in the COMAND display.
To deactivate: the rear view camera is
deactivated if you:
R
shift the transmission to position P
R
drive forward ten meters
R
shift the transmission from R to another
position after 15 seconds
R
drive forwards at a speed of over 5 mph
(10 km/h)
Off-road driving systems
Transfer case
General notes
The vehicle has permanent all-wheel drive.
Power is always transmitted to both axles.
For further information on driving off-road,
see (Y page 164).
Shift ranges
G
WARNING
If you do not wait for the transfer case gear
change process to complete, the transfer
case could remain in the neutral position. The
power transmission to the driven wheels is
then interrupted. There is a danger of the
vehicle rolling away unintentionally. There is
a risk of an accident.
Wait until the transfer case shift process is
completed.
Do not turn off the engine while changing gear
and do not shift the automatic transmission
to another gear.
HIGH
RANGE
Position for all normal on-
road driving conditions
LOW
RANGE
Low-range position for
driving off-road.
Also for use on steep uphill
or downhill gradients,
especially when towing a
trailer.
The vehicle travels around
half the speed of on-road
driving range HIGH RANGE.
The tractive power is
correspondingly higher.
Off-road driving systems
193
Driving and parking
Z
Shifting the transfer case
Important safety notes
G
WARNING
When the transfer case is in the neutral
position, power transmission to the driven
wheels is interrupted. As a result, the vehicle
could roll away. There is a risk of an accident.
Secure the vehicle with the parking brake, and
on uphill or downhill gradients, also secure it
with a device such as a wheel chock.
Always wait for the gear change process from
HIGH RANGE to LOW RANGE and from
LOW RANGE to HIGH RANGE to complete.
Do not turn off the engine while changing gear
and do not shift the automatic transmission
to another gear.
General notes
:
Current shift range
:
Indicator lamp
;
LOW RANGE button
Switching on the off-road gear ratio
!
Only carry out the gear selection if:
R
the engine is running.
R
the vehicle is rolling.
R
the automatic transmission is in selector
lever position N.
R
you are driving no faster than 25 mph
(40 km/h).
You could otherwise damage the transfer
case.
i
AMG vehicles: to shift the transfer case
to LOW RANGE, deactivate the ECO start/
stop function (Y page 142).
X
Press LOW RANGE button ;.
When the shift procedure is complete, the
LOW RANGELOW RANGE transfer case position appears
in the multifunction display.
Indicator lamp : lights up.
X
Shift the transmission to position D.
Switching off the off-road gear ratio
G
WARNING
When the transfer case is in the neutral
position, power transmission to the driven
wheels is interrupted. As a result, the vehicle
could roll away. There is a risk of an accident.
Secure the vehicle with the parking brake, and
on uphill or downhill gradients, also secure it
with a device such as a wheel chock.
!
Only carry out the gear selection if:
R
the engine is running.
R
the vehicle is rolling.
R
the automatic transmission is in selector
lever position N.
R
you are driving no faster than 43 mph
(70 km/h).
194
Off-road driving systems
Driving and parking
You could otherwise damage the transfer
case.
X
Press button ;.
When the shift procedure is complete, the
HIGHHIGH RANGERANGE transfer case position appears
in the multifunction display.
Indicator lamp : goes out.
If the gear change is not completed, the
following messages could appear in the
display:
R
TC shift Conditions Not FulfilledTC shift Conditions Not Fulfilled
You have not met one or more shift
conditions.
R
TC NEUTRAL OnTC NEUTRAL On
The transfer case has canceled the gear
change process and is in N. Transfer case
position
NN appears in the multifunction
display.
R
TC shift CanceledTC shift Canceled
The transfer case has not performed the
gear change process.
X
Carry out the gear change process again.
Make sure to meet all conditions for
changing gears.
R
TC Malfunction Visit WorkshopTC Malfunction Visit Workshop
There is a malfunction in the transfer case.
X
Do not shift the transfer case.
X
Have the vehicle checked as soon as
possible at a qualified specialist workshop.
Shifting to neutral
G
WARNING
When the transfer case is in the neutral
position, power transmission to the driven
wheels is interrupted. As a result, the vehicle
could roll away. There is a risk of an accident.
Secure the vehicle with the parking brake, and
on uphill or downhill gradients, also secure it
with a device such as a wheel chock.
X
Turn the SmartKey to position 2 in the
ignition lock (Y page 139).
X
Apply the parking brake.
X
Depress the brake pedal.
X
Move the selector lever to position
N(Y page 145).
X
Press and hold LOW RANGE button ; for
approximately 10 seconds.
When the shift procedure is complete, the
TC In NeutralTC In Neutral message appears in the
multifunction display for 5 seconds.
If the gear change is not completed, the
following messages could appear in the
display (Y page 233).
i
If the transfer case is in Neutral, the
SmartKey is in the ignition lock and you
open the driver's door, the
TC InTC In
Neutral
Neutral message appears in the
multifunction display. If you then release
the parking brake, a warning tone will
sound.
Differential locks
General notes
G
WARNING
When the differential locks are engaged, ABS,
4ETS, ESP
®
and BAS are deactivated. As a
result, the wheels could lock when braking
and the braking distance is increased. There
is a risk of an accident.
Disengage the differential locks immediately
on firm surfaces with good grip.
!
In order to avoid damage to the transfer
case, you must operate the vehicle on a
dynamometer (1-axle dynamometer) only
if:
R
the axle not driven on is jacked up
or
R
the corresponding propeller shaft is
disconnected and the transfer case
differential lock is engaged.
Otherwise, the transfer case can be
damaged.
Off-road driving systems
195
Driving and parking
Z
Differential locks improve the traction of the
vehicle.
Your vehicle is equipped with a differential
lock each for:
R
the transfer case: this controls the balance
between the front and rear axles.
R
the rear axle: this controls the balance
between the wheels on the rear axle.
R
the front axle: this controls the balance
between the wheels on the front axle.
Information on differential and
differential locks
When the vehicle drives around a curve, the
wheels on the outside of the curve must cover
a greater distance. Therefore, the wheels turn
more rapidly than on the inside. The
differential, a transmission in the drive train,
compensates for these different rotational
speeds, making cornering possible.
The disadvantage of a differential is that more
power is transferred to the wheels that have
the least grip. An example: a wheel of a driven
axle is on a snow-covered surface and
therefore does not have any traction. The
differential causes this wheel to be subjected
to the strongest driving force, as the flow of
force takes the path of least resistance. The
opposite wheel on this axle, however, which
stands on firm ground and could therefore
allow propulsion, receives no driving power.
4ETS compensates for this disadvantage.
4ETS provides good steerability by
automatically braking the spinning wheel.
4ETS provides the wheel on the firm surface
with more drive force, which in turn provides
propulsion.
ESP® and 4ETS are traction systems that are
ideal for road driving and suitable for light off-
road driving. The LOW RANGE off-road gear
also improves off-road capability.
Moreover, the more difficult conditions in off-
road driving require further measures such as
locking one or several differentials. Your
vehicle is equipped with three differential
locks:
R
a central differential lock for the transfer
case,
R
a differential lock for the front axle and
R
a differential lock for the rear axle.
Each differential lock can be engaged with the
respective switch on the center console. If
the transfer case differential is disabled, the
front and rear wheels turn at the same speed.
If the differential for the rear axle is locked,
both rear wheels turn at the same speed,
regardless of their individual torques. Please
note that activating the differential locks
severely restricts the vehicle's steerability.
Please note that the functions of the
differential are absolutely necessary for
driving on paved roads. The differential locks
must never be engaged when driving on
paved roads. Otherwise, the vehicle may not
be steerable and you could lose control of the
vehicle. The differential locks must therefore
only be engaged when driving off-road. You
may only engage the differential locks if the
functions of the 4ETS and ESP
®
driving
systems and the LOW RANGE off-road gear
are insufficient.
i
The differential locks are only available in
the LOW RANGE off-road gear.
Engaging the differential locks
Important safety notes
G
WARNING
When differential locks are engaged on a firm,
high-grip surface, the vehicle's steerability is
greatly impaired. In particular, engaging the
differential locks when cornering could lead
to you losing control of the vehicle. There is a
risk of an accident.
Disengage the differential locks immediately
on firm surfaces with good grip.
G
WARNING
When the differential locks are engaged, ABS,
4ETS, ESP
®
and BAS are deactivated. As a
result, the wheels could lock when braking
196
Off-road driving systems
Driving and parking
and the braking distance is increased. There
is a risk of an accident.
Disengage the differential locks immediately
on firm surfaces with good grip.
!
Only engage the differential locks when:
R
you are driving at walking pace.
R
the driven wheels are not spinning.
R
you are not driving on a firm road surface.
General notes
The switches are located on the center
console.
:
Function indicator lamps (red)
;
Differential lock for the front axle
=
Differential lock for the transfer case
?
Differential lock for the rear axle
A
Activation indicator lamps (yellow)
Engage the differential locks:
R
off-road
R
to deactivate ABS, 4ETS, ESP
®
and BAS
while off-road
R
when fording
For further information on driving off-road,
see (Y page 164).
i
You can only engage the differential locks
if the transfer case is in the LOW RANGE
off-road driving position (Y page 193).
i
You can activate the differential locks in
the following order =, ?, ;.
Differential lock for the transfer case
X
To engage: switch the transfer case to the
LOW RANGE off-road driving position
(Y page 194).
X
Press switch =.
When the transfer case is in the LOW
RANGE off-road driving position, the yellow
activation indicator lamp below switch =
lights up.
The å warning lamp in the instrument
panel lights up.
When the differential is locked, the red
function indicator lamp above switch =
lights up.
In the multifunction display you see the:
ABS not available DifferentialABS not available Differential
LockedLocked message.
The å!÷ warning lamps in the
instrument cluster light up.
The differential lock for the transfer case is
engaged.
4ETS, ESP
®
, BAS and ABS are deactivated.
The vehicle's ability to steer is severely
restricted. Drive carefully and accelerate
gently for optimum traction.
i
You can now engage the differential lock
for rear axle ? and the differential lock for
front axle ; as required.
Differential lock for the rear axle
X
To engage: press switch ?.
Yellow activation indicator lamp A lights
up first, followed by red function indicator
lamp : of switch ?.
The differential lock for the rear axle is
engaged.
Differential lock for the front axle
X
To engage: press switch ;.
First, the yellow activation indicator lamp
lights up, followed by the red function
indicator lamp.
Off-road driving systems
197
Driving and parking
Z
The differential lock for the front axle is
engaged.
Disengaging the differential locks
You can disengage the differential locks in the
following order: ;, ?, =.
X
To simultaneously disengage all
differential locks: press switch =.
Yellow activation indicator lamps A and
red function indicator lamps : go out.
After approximately three seconds of
normal driving, ABS, 4ETS, ESP
®
and BAS
are activated.
The
ABSABS notnot availableavailable DifferentialDifferential
Locked
Locked message disappears in the
multifunction display and the å, !
and ÷ warning lamps in the instrument
cluster go out.
X
Shift the transfer case to the HIGH
RANGE on-road position (Y page 194).
i
If red function indicator lamps : do not
go out after disengaging the differential
locks, bring the vehicle to a standstill in
accordance with the traffic conditions.
Then continue driving, as the load change
can release the differential locks.
Towing a trailer
Notes on towing a trailer
Important safety notes
G
WARNING
If you rest your foot on the brake pedal while
driving, the braking system can overheat. This
increases the stopping distance and can even
cause the braking system to fail. There is a
risk of an accident.
Never use the brake pedal as a footrest. Never
depress the brake pedal and the accelerator
pedal at the same time.
G
WARNING
When the vehicle/trailer combination begins
to lurch, you could lose control of it. The
vehicle/trailer combination could even
rollover. There is a risk of an accident.
On no account should you attempt to
straighten up the vehicle/trailer combination
by increasing the speed. Reduce vehicle
speed and do not countersteer. Apply the
brake as necessary.
G
WARNING
If you install a ball coupling other than the one
delivered with the vehicle, the trailer tow hitch
and the rear axle may be overloaded. This
applies especially if the ball coupling in
question is longer or angled differently. This
could seriously impair the driving
characteristics and the trailer can come
loose. There is a risk of an accident.
Only install the ball coupling delivered with
the vehicle or a ball coupling that is designed
to meet your trailer towing requirements. Do
not modify the ball coupling or the trailer tow
hitch.
G
WARNING
If the ball coupling is not installed correctly or
not secured with the bolt provided and the
corresponding spring cotter, the trailer may
come loose. There is a risk of an accident.
Always install and secure the ball coupling as
described. Before every journey, ensure that
the ball coupling is secured with the bolt and
the corresponding spring cotter.
Please observe the manufacturer's operating
instructions for the trailer coupling if a
detachable trailer coupling is used.
You will find the applicable permissible
values, which must not be exceeded, in the
vehicle documents. You will find the values
approved by the manufacturer on the vehicle
identification plates and those for the towing
vehicle in the "Technical data" section
(Y page 342).
198
Towing a trailer
Driving and parking

Related Topics

Popular Owner Manuals