1990-2018 Mercedes G Class SUV On-board computer and displays -> Menus and submenus User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

On-board computer and displays -> Menus and submenus for Your Mercedes G Class SUV Third Generation (1990-2018)

A
Outside temperature or speed
(Y page 215)
B
Time
C
Transfer case position (Y page 193)
X
To show menu bar ?: press the =
or ; button on the steering wheel.
Menu bar ? disappears after a few seconds.
Text field = shows the selected menu or
submenu as well as display messages.
For further information on displaying the
transmission position, see (Y page 146).
i
You can set the time using the audio
system or COMAND, see the separate
operating instructions.
The following messages may appear in the
multifunction display:
Z
Upshift indicator (Y page 151)
¯
Cruise control (Y page 168)
LIMLIM
SPEEDTRONIC (Y page 174)
¤
ECO start/stop function (AMG
vehicles) (Y page 141)
LOWLOW
RANGERANGE
LOW RANGE off-road gear
(Y page 194)
ë
HOLD function (Y page 188)
Menus and submenus
Menu overview
Press the = or ; button on the
steering wheel to call up the menu bar and
select a menu.
Operating the on-board computer
(Y page 206).
Depending on the equipment installed in the
vehicle, you can call up the following menus:
R
TripTrip menu (Y page 208)
R
NaviNavi menu (navigation instructions)
(Y page 209)
R
AudioAudio menu (Y page 211)
R
TelTel menu (telephone) (Y page 212)
R
DriveAssistDriveAssist menu (assistance)
(Y page 213)
R
Serv.Serv. menu (Y page 214)
R
Sett.Sett. menu (Y page 214)
R
AMGAMG menu in AMG vehicles (Y page 217)
Trip menu
Standard display
X
Press and hold the % button on the
steering wheel until the
TripTrip menu with
trip odometer : and odometer ; is
shown.
Trip computer "From start" or "From
reset"
Example: trip computer "From Start"
:
Distance
;
Time
=
Average speed
?
Average fuel consumption
X
Press the = or ; button on the
steering wheel to select the
TripTrip menu.
X
Press 9 or : to select
From StartFrom Start
or From ResetFrom Reset.
The values in the
From StartFrom Start submenu are
calculated from the start of a journey whilst
the values in the
From ResetFrom Reset submenu are
208
Menus and submenus
On-board computer and displays
calculated from the last time the submenu
was reset (Y page 209).
The
From StartFrom Start trip computer is
automatically reset when:
R
The ignition has been switched off for more
than four hours.
R
999 hours have been exceeded.
R
9,999 miles have been exceeded.
The
From ResetFrom Reset trip computer is
automatically reset if the value exceeds
9,999 hours or 99,999 miles.
Displaying the range and current fuel
consumption
:
Approximate range
;
Current fuel consumption (not for AMG
vehicles)
X
Press the = or ; button on the
steering wheel to select the
TripTrip menu.
X
Press the 9 or : button to select the
current fuel consumption (not for AMG
vehicles) and the approximate range.
The approximate range that can be covered
depends on the fuel level and your current
driving style. If there is only a small amount
of fuel left in the fuel tank, the display shows
a vehicle being refueled C instead of the
range.
Digital speedometer
:
Digital speedometer
X
Press the = or ; button on the
steering wheel to select the
TripTrip menu.
X
Press the 9 or : button to select the
digital speedometer.
Resetting values
Example: resetting the trip computer "From Start"
X
Press the = or ; button on the
steering wheel to select the
TripTrip menu.
X
Press the 9 or : button to select the
function that you wish to reset.
X
Press the a button.
X
Press the : button to select
YesYes and
press the a button to confirm.
You can reset the values of the following
functions:
R
Trip odometer
R
"From Start" trip computer
R
"From Reset" trip computer
Navigation system menu
Displaying navigation instructions
In the NaviNavi menu, the multifunction display
shows navigation instructions.
Menus and submenus
209
On-board computer and displays
Z
For more information, see the separate
operating instructions.
X
Switch on COMAND (see the separate
operating instructions).
X
Press the = or ; button on the
steering wheel to select the
NaviNavi menu.
Route guidance not active
:
Direction of travel
;
Current street
Route guidance active
No change of direction announced
:
Distance to the destination
;
Distance to the next change of direction
=
Current street
?
Symbol "follow the road's course"
Change of direction announced without a
lane recommendation
:
Road into which the change of direction
leads
;
Distance to change of direction and visual
distance display
=
Change-of-direction icon
When a change of direction has been
announced, you will see visual distance
display ; next to the symbol for change of
direction =. This shortens from the bottom
to the top of the display as you approach the
point of the announced change of direction.
Change of direction announced with a
lane recommendation
:
Road into which the change of direction
leads
;
Distance to change of direction and visual
distance display
=
Lane recommendation
?
New lane during a change of direction
A
Uninterrupted lane
B
Change-of-direction icon
On multilane roads, the system can display
lane recommendation = for the next change
of direction. During the change of direction,
additional lanes may be displayed.
Lane recommendations are only displayed if
the relevant data is available on the digital
map.
210
Menus and submenus
On-board computer and displays
Other status indicators of the
navigation system
R
O: you have reached the destination or an
intermediate destination.
R
New Route...New Route... or Calculating RouteCalculating Route:
calculating a new route
R
Off MapOff Map or OffOff MappedMapped RoadRoad: the vehicle
position is outside the area of the digital
map (off-map position).
R
No RouteNo Route: no route could be calculated to
the selected destination.
Audio menu
Selecting a radio station
:
Waveband
;
Station frequency with memory position
i
Station ; is displayed with the station
frequency or station name. The memory
position is only displayed along with
station ; if this has been stored.
X
Switch on COMAND and select Radio; see
the separate operating instructions.
X
Press the = or ; button on the
steering wheel to select the
AudioAudio menu.
X
To select a stored station: briefly press
the 9 or : button.
X
To select a station from the station
list: press and briefly hold the 9
or : button.
If no station list is received:
X
To select a station using the station
search: press and briefly hold the 9
or : button.
i
For information on switching waveband
and storing stations; see the separate
operating instructions.
i
SIRIUS XM satellite radio functions like a
normal radio.
For more information on satellite radio
operation, see the separate operating
instructions.
Operating audio devices or media
Display CD/DVD changer (example)
:
Current CD in the CD/DVD changer
;
Current title
Audio data from various audio devices or
media can be played, depending on the
equipment installed in the vehicle.
X
Switch on COMAND and select the audio
player or medium (see the separate
operating instructions).
X
Press the = or ; button on the
steering wheel to select the
AudioAudio menu.
X
To select the next/previous track:
briefly press the 9 or : button.
X
To select a track from the track list
(rapid scrolling): press and hold the
9 or : button until desired
track ; has been reached.
If you press and hold 9 or :, the
rapid scrolling speed is increased. Not all
audio drives or data carriers support this
function.
If track information is stored on the audio
device or medium, the multifunction display
will show the number and title of the track.
The current track does not appear in audio
AUX mode (Auxiliary audio mode: external
audio source connected).
Menus and submenus
211
On-board computer and displays
Z
Video DVD operation
Display CD/DVD changer (example)
:
Current DVD in the CD/DVD changer
;
Current scene
X
Switch on COMAND and select video DVD;
see the separate operating instructions.
X
Press the = or ; button on the
steering wheel to select the
AudioAudio menu.
X
To select the next/previous scene:
briefly press the 9 or : button.
X
To select a scene from the scene list
(rapid scrolling): press and hold the
9 or : button until desired
scene ; has been reached.
Telephone menu
Introduction
G
WARNING
The driver's attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the
telephone while driving, please use the hands-
free device and only use the telephone when
road, weather and traffic conditions permit.
Some jurisdictions prohibit the driver from
using a mobile phone while driving a vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle covers
a distance of 44 feet (approximately 14 m)
every second.
X
Switch on the mobile phone (see the
separate operating instructions).
X
Switch on COMAND (see the separate
operating instructions).
X
Establish a Bluetooth
®
connection to
COMAND; see the separate operating
instructions.
X
Press the = or ; button on the
steering wheel to select the
TelTel menu.
You will see one of the following display
messages in the multifunction display:
R
Phone READYPhone READY or the name of the network
provider: the mobile phone has found a
network and is ready to receive.
R
Phone No ServicePhone No Service: there is no network
available or the mobile phone is searching
for a network.
Accepting a call
Example: incoming call
If someone calls you when you are in the
TelTel menu, a display message appears in the
multifunction display.
X
Press the 6 button on the steering
wheel to accept an incoming call.
You can accept a call even if you are not in
the
TelTel menu.
Rejecting or ending a call
X
Press the ~ button on the steering
wheel.
You can end or reject a call even if you are not
in the
TelTel menu.
212
Menus and submenus
On-board computer and displays
Dialing a number from the phone book
X
Press the = or ; button on the
steering wheel to select the
TelTel menu.
X
Press the 9, : or a button to
switch to the phone book.
X
Press the 9 or : button to select the
desired name.
or
X
To begin rapid scrolling: press and hold
the 9 or : button for longer than
one second.
Rapid scrolling stops when you release the
button or reach the end of the list.
X
If only one telephone number is stored
for a name: press the 6 or a button
to start dialing.
or
X
If there is more than one number for a
particular name: press the 6 or a
button to display the numbers.
X
Press the 9 or : button to select the
number you want to dial.
X
Press the 6 or a button to start
dialing.
or
X
To exit the telephone book: press the
~ or % button.
Redialing
The on-board computer saves the last names
or numbers dialed in the redial memory.
X
Press the = or ; button on the
steering wheel to select the
TelTel menu.
X
Press the 6 button to switch to the
redial memory.
X
Press the 9 or : button to select the
desired name or number.
X
Press the 6 or a button to start
dialing.
or
X
To exit the redial memory: press the
~ or % button.
Assistance menu
Introduction
In the DriveAssistDriveAssist menu, you have the
following options:
R
show the distance display (Y page 213)
R
activate/deactivate Blind Spot Assist or
Active Blind Spot Assist (Y page 213)
Showing the distance display
X
Press = or ; on the steering wheel
to select the
DriveAssistDriveAssist menu.
X
Press the 9 or : button to select
Distance DisplayDistance Display.
X
Press the a button.
The DISTRONIC PLUS distance display
appears in the multifunction display
(Y page 182).
Activating/deactivating Blind Spot
Assist
X
Press = or ; on the steering wheel
to select the
DriveAssistDriveAssist menu.
X
Press the 9 or : button to select
Blind Spot AsstBlind Spot Asst.
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
For further information about Blind Spot
Assist, see (Y page 185).
Menus and submenus
213
On-board computer and displays
Z
Maintenance menu
Example: service menu
In the
Serv.Serv. menu, you have the following
options:
R
calling up display messages (Y page 220)
R
checking the tire pressure electronically
(Y page 321)
R
calling up when a service is due
(Y page 287)
Settings menu
Introduction
Example: settings menu
In the
Sett.Sett. menu, you have the following
options:
R
changing the instrument cluster settings
(Y page 214)
R
changing the light settings (Y page 215)
R
changing the vehicle settings
(Y page 216)
R
changing the convenience settings
(Y page 216)
R
restoring the factory settings
(Y page 217)
Instrument cluster
Selecting the unit of measurement for
distance
The
Display Unit Speed-/Odometer:Display Unit Speed-/Odometer:
function allows you to choose whether
certain displays appear in kilometers or miles
in the multifunction display.
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X
Press the = or ; button on the
steering wheel to select the
Sett.Sett. menu.
X
Press the : or 9 button to select the
Inst. ClusterInst. Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/Odometer:Display Unit Speed-/Odometer:
function.
You will see the selected setting:
kmkm or
milesmiles.
X
Press the a button to save the setting.
The selected unit of measurement for
distance applies to:
R
Vehicles with instrument cluster in
kilometers: digital speedometer in the
TripTrip menu
R
the odometer and the trip odometer
R
the trip computer
R
the current consumption and the range
R
the navigation instructions in the
NaviNavi
menu
R
cruise control
R
SPEEDTRONIC
R
DISTRONIC PLUS
R
the service interval display
214
Menus and submenus
On-board computer and displays
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X
Press the = or ; button on the
steering wheel to select the
Sett.Sett. menu.
X
Press the : or 9 button to select the
Instr. ClusterInstr. Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display:Permanent Display: function.
You will see the selected setting:
OutsideOutside
Temperature
Temperature or Speedometer [mph]Speedometer [mph].
X
Press the a button to save the setting.
i
Speed is displayed in mph.
Lights
Setting the daytime running lamps
i
This function is not available in Canada.
X
Press the = or ; button on the
steering wheel to select the
Sett.Sett. menu.
X
Press the : or 9 button to select the
LightsLights submenu.
X
Press a to confirm.
X
Press : or 9 to select the
DaytimeDaytime
Running Lights
Running Lights function.
If the
Daytime Running Lights:Daytime Running Lights: have
been switched on, the cone of light and the
W symbol in the multifunction display
are shown in red.
X
Press the a button to save the setting.
Further information on daytime running
lamps (Y page 99).
Surround lighting and exterior lighting
delayed switch-off
X
Press the = or ; button on the
steering wheel to select the
Sett.Sett. menu.
X
Press the : or 9 button to select the
LightsLights submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Surround LightingSurround Lighting function.
When the
Surround LightingSurround Lighting function is
activated, the cone of light in the
multifunction display is shown in red.
X
Press the a button to save the setting.
Deactivating delayed switch-off of the
exterior lighting temporarily:
X
Before leaving the vehicle, turn the
SmartKey to position 0(Y page 139) in the
ignition lock.
X
Turn the SmartKey to position 2 in the
ignition lock (Y page 139).
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
If you have activated the
SurroundSurround
Lighting
Lighting function and the light switch is set
to Ã, the following functions are activated
when it is dark:
R
Surround lighting: the exterior lighting
remains lit for 40 seconds after unlocking
with the SmartKey. If you start the engine,
the surround lighting is switched off and
automatic headlamp mode is activated
(Y page 100).
R
Exterior lighting delayed switch-off: the
exterior lighting remains lit for
60 seconds after the engine is switched off.
If you close all the doors and the trunk lid,
the exterior lighting goes off after
15 seconds.
i
Depending on your vehicle's equipment,
when the surround lighting and delayed
switch-off exterior lighting are on, the
following light up:
R
Parking lamps
R
Front fog lamps
R
Low-beam headlamps
R
Daytime running lamps
R
Side marker lamps
R
Surround lighting in the exterior mirrors
Menus and submenus
215
On-board computer and displays
Z
Activating/deactivating the interior
lighting delayed switch-off
If you activate the
Interior LightingInterior Lighting
Delay
Delay function, the interior lighting remains
on for 20 seconds after you remove the
SmartKey from the ignition lock.
X
Press the = or ; button on the
steering wheel to select the
Sett.Sett. menu.
X
Press the : or 9 button to select the
LightsLights submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Interior Lighting DelayInterior Lighting Delay function.
When the
Interior Lighting DelayInterior Lighting Delay
function is activated, the vehicle interior is
displayed in red in the multifunction
display.
X
Press the a button to save the setting.
Vehicle
Activating/deactivating the automatic
door locking mechanism
If you activate the
Automatic Door LockAutomatic Door Lock
function, the vehicle is centrally locked above
a speed of around 9 mph (15 km/h).
X
Press the = or ; button on the
steering wheel to select the
Sett.Sett. menu.
X
Press the : or 9 button to select the
VehicleVehicle submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Automatic Door LockAutomatic Door Lock function.
When the
AutomaticAutomatic DoorDoor LockLock function
is activated, the vehicle doors are displayed
in red in the multifunction display.
X
Press the a button to save the setting.
For further information on the automatic
locking feature, see (Y page 75).
Activating/deactivating the acoustic
locking verification signal
If you switch on the
AcousticAcoustic LockLock function,
an acoustic signal sounds when you lock the
vehicle.
X
Press the = or ; button on the
steering wheel to select the
Sett.Sett. menu.
X
Press : or 9 to select the
VehicleVehicle
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Acoustic LockAcoustic Lock function.
If the
AcousticAcoustic LockLock function is activated,
the & symbol in the multifunction
display lights up red.
X
Press the a button to save the setting.
Convenience
Activating/deactivating the EASY-
ENTRY/EXIT feature
G
WARNING
You must make sure no one can become
trapped or injured by the moving steering
wheel when the easy-entry/exit feature is
activated.
To stop steering wheel movement, move
steering wheel adjustment lever or press one
of the memory position buttons.
Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could open the driver's door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
X
Press the = or ; button on the
steering wheel to select the
Sett.Sett. menu.
X
Press the : or 9 button to select the
ConvenienceConvenience submenu.
X
Press a to confirm.
216
Menus and submenus
On-board computer and displays
X
Press : or 9 to select the
EasyEasy
Entry/Exit:
Entry/Exit: function.
If the
Easy Entry/ExitEasy Entry/Exit function is
activated, the vehicle steering wheel is
displayed in red in the multifunction
display.
X
Press the a button to save the setting.
Further information on the EASY-ENTRY/EXIT
feature (Y page 92).
Switching the fold-in mirrors with the
locking feature on/off
When you activate the
Auto. MirrorAuto. Mirror
Folding
Folding function, the exterior mirrors are
folded in when the vehicle is locked. If you
unlock the vehicle and then open a door, the
exterior mirrors fold out again.
X
Press the = or ; button on the
steering wheel to select the
Sett.Sett. menu.
X
Press the : or 9 button to select the
ConvenienceConvenience submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Auto.Auto.
Mirror Folding
Mirror Folding function.
If the
Auto. Mirror FoldingAuto. Mirror Folding function is
activated, the vehicle's exterior mirror is
displayed in red in the multifunction
display.
X
Press the a button to save the setting.
:
To fold the exterior mirrors in or out
If you have switched the
Auto. MirrorAuto. Mirror
FoldingFolding on and you fold the exterior mirrors
in using button :, they will not fold out
automatically (Y page 93).
You can then only fold out the exterior mirrors
using button :.
Restoring the factory settings
X
Press the = or ; button on the
steering wheel to select the
Sett.Sett. menu.
X
Press the : or 9 button to select the
Factory SettingFactory Setting submenu.
X
Press a to confirm.
The
Reset All Settings?Reset All Settings? message
appears.
X
Press the : or 9 button to select
NoNo or YesYes.
X
Press a to confirm the selection.
If you select
YesYes, the multifunction display
shows a confirmation message.
For safety reasons, the
Daytime RunningDaytime Running
Lights
Lights function in the LightsLights submenu is
only reset if the vehicle is stationary.
AMG menu in AMG vehicles
AMG displays
:
Digital speedometer
;
Gear indicator
=
Upshift indicator
?
Engine oil temperature
A
Coolant temperature
B
Status indicator for ECO start/stop
function (Y page 141)
X
Press = or ; on the steering wheel
to select the
AMGAMG menu.
Upshift indicator UPUP = indicates that the
engine has reached the overrevving range
when in the manual gearshift program.
Menus and submenus
217
On-board computer and displays
Z
Upshift indicator UPUP = fades out other
messages until you have shifted up.
If the engine oil temperature is below 176 ‡
(80 †), the oil temperature is shown in blue.
Avoid driving at full engine output during this
time.
SETUP
:
Drive program (
CC/SS+SS+/MM)
;
ESP
®
mode (
ONON/OFFOFF)
=
Suspension tuning (
SPORTSPORT/COMFORTCOMFORT)
SETUP shows the drive program, the ESP
®
(Electronic Stability Program) mode and the
SPORT handling mode.
X
Press = or ; on the steering wheel
to select the
AMGAMG menu.
X
Press the 9 button repeatedly until
SETUP is displayed.
RACETIMER
Displaying and starting RACETIMER
G
WARNING
The RACETIMER feature is only for use on
roads and in conditions where high speed
driving is permitted. Racing on public roads is
prohibited under all circumstances. The driver
is and must always remain responsible for
following posted speed limits.
:
Lap
;
RACETIMER
You can start the RACETIMER when the
engine is running or if the SmartKey is in
position 2(Y page 139) in the ignition lock.
X
Press = or ; on the steering wheel
to select the
AMGAMG menu.
X
Press the 9 button repeatedly until the
RACETIMER is shown.
X
To start: press the a button to start the
RACETIMER.
Displaying the intermediate time
X
Press the = or ; button to select
Interm. TimeInterm. Time.
X
Press a to confirm.
The intermediate time is displayed for five
seconds.
Starting a new lap
:
RACETIMER
;
Fastest lap time (best lap)
=
Lap
X
Press a to confirm
New LapNew Lap.
218
Menus and submenus
On-board computer and displays
i
It is possible to store a maximum of
sixteen laps. The 16th lap can only be
completed with
Finish LapFinish Lap.
Stopping the RACETIMER
X
Press the % button on the steering
wheel.
X
Press a to confirm
YesYes.
The RACETIMER is interrupted if you stop the
vehicle and turn the SmartKey to position
1(Y page 139) in the ignition lock. If you turn
the SmartKey to position 2 or
3(Y page 139) and then press a to
confirm
StartStart, timing is continued.
Resetting the current lap
X
Stop the RACETIMER (Y page 219).
X
Press = or ; to select
Reset LapReset Lap.
X
Press a to reset the lap time to "0".
Deleting all laps
If you switch off the engine, the RACETIMER
is reset to "0" after 30 seconds. All laps are
deleted.
You cannot delete individual stored laps. If
you have stopped 16 laps, the current lap
does not have to be reset.
X
Reset the current lap (Y page 219).
X
Press a to confirm
ResetReset.
Reset Race Timer?Reset Race Timer? appears in the
multifunction display.
X
Press the : button to select
YesYes and
press the a button to confirm.
All laps are deleted.
Overall statistics
:
RACETIMER overall evaluation
;
Total time driven
=
Average speed
?
Distance covered
A
Maximum speed
This function is shown if you have stored at
least one lap and stopped the RACETIMER.
X
Press = or ; on the steering wheel
to select the
AMGAMG menu.
X
Press the 9 button repeatedly until the
overall evaluation is shown.
Lap statistics
:
Lap
;
Lap time
=
Average lap speed
?
Lap length
A
Top speed during lap
Menus and submenus
219
On-board computer and displays
Z
This function is only available if you have
stored at least two laps and have stopped the
RACETIMER.
X
Press = or ; on the steering wheel
to select the
AMGAMG menu.
X
Press the 9 button repeatedly until the
lap evaluation is shown.
Each lap is shown in a separate submenu.
The fastest lap is indicated by flashing
symbol :.
X
Press the 9 or : button to select a
different lap evaluation.
Display messages
Introduction
General notes
Display messages appear in the multifunction
display.
Display messages with graphic displays may
be shown in simplified form in the Operator's
Manual and may differ from the messages
shown in the multifunction display.
Please respond in accordance with the
display messages and follow the additional
notes in this Operator's Manual.
Certain display messages are accompanied
by an audible warning tone or a continuous
tone.
When you stop and park the vehicle, please
observe the notes on:
R
HOLD function (Y page 188)
R
Parking (Y page 156)
Hiding display messages
X
Press the a or % button on the
steering wheel to hide the display message.
The display message is cleared.
Display messages with a high priority are
shown in red.
You cannot hide display messages of the
highest priority. The multifunction display
shows these messages continuously until the
causes for the messages have been
remedied.
Message memory menu
The on-board computer saves certain display
messages. You can call up the display
messages in the message memory.
X
Press the = or ; button on the
steering wheel to select the
Serv.Serv. menu.
If there are display messages, the
multifunction display shows
2 Messages2 Messages,
for example.
X
Press the 9 or : button to select the
entry, e.g.
2 Messages2 Messages.
X
Press a to confirm.
X
Press the 9 or : button to scroll
through the display messages.
When the ignition is switched off, all display
messages are deleted, apart from some high-
priority display messages. Once the causes of
the high-priority display messages have been
rectified, the corresponding display
messages are also deleted.
220
Display messages
On-board computer and displays

Related Topics

On-board computer and displays
Useful information Important safety notes Displays and operation Display messages Warning and indicator lamps in the instrument cluster

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot