1990-2018 Mercedes G Class SUV Stowage and features -> Features User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Stowage and features -> Features for Your Mercedes G Class SUV Third Generation (1990-2018)

The roof is not suited for transporting loads.
Do not use the roof rails or other accessories
which are mounted on the roof.
Features
Cup holder
Important safety notes
G
WARNING
In order to help prevent spilling liquids on
vehicle occupants and/or vehicle equipment,
only use containers that fit into the cup
holder. Use lids on open containers and do
not fill containers to a height where the
contents, especially hot liquids, could spill
during braking, vehicle maneuvers, or in an
accident. Liquids spilled on vehicle occupants
may cause serious personal injury. Liquids
spilled on vehicle equipment may cause
damage not covered by the Mercedes-Benz
Limited Warranty.
When not in use, keep the cup holder closed.
An open cup holder may cause injury to you
or others when contacted during braking,
vehicle maneuvers, or in an accident.
Keep in mind that objects placed in the cup
holder may come loose during braking,
vehicle maneuvers, or in an accident and be
thrown around in the vehicle interior. Objects
thrown around in the vehicle interior may
cause an accident and/or serious personal
injury.
Cup holder on the center console
X
Fold cup holder : all the way up.
Cup holders in the rear compartment
!
Ensure that you remove all containers
from the cup holder in the rear before
folding the seat backrest and the seat
cushion of the rear bench seat forwards.
:
Cup holders
Sun visors
Overview of sun visors
G
WARNING
Do not use the vanity mirror while driving.
Keep the vanity mirrors in the sun visors
closed while the vehicle is in motion.
Reflected glare can endanger you and others.
:
Sun visor
;
Bracket
=
Mirror cover
?
Mirror light
262
Features
Stowage and features
Vanity mirror in the sun visor
:
Sun visor
;
Bracket
=
Mirror cover
?
Mirror light
Mirror lights ? will only function if sun
visor : is clipped into bracket ;.
X
Fold down sun visor :.
X
Fold up mirror cover =.
Mirror lights ? are switched on
automatically.
Glare from the side
:
Sun visor
;
Bracket
=
Mirror cover
?
Mirror light
X
Fold down sun visor :.
X
Pull sun visor : from bracket ;.
X
Swing sun visor : to the side.
Stowage compartment/ashtray
Stowage compartment/ashtray in the
center console
:
Cover
;
Insert
i
On new vehicles, insert ; is stored in the
glove box. Install the insert before using the
ashtray.
X
To open: press cover : and then release
it.
The ashtray opens.
X
To remove the insert: make sure that the
engine is switched off and that the parking
brake has been applied to secure the
vehicle against rolling away.
X
Move the selector lever to N.
X
Press down cover :.
Insert ; is released.
X
Pull insert ; upwards and remove it.
X
To install the insert: install insert ; from
above.
X
Push insert ; down.
Insert ; audibly engages.
X
To close: close cover : fully.
i
The ashtray is lit up if the low-beam
headlamps are on.
Features
263
Stowage and features
Z
Ashtray in the rear compartment
X
To open: fold cover ; out in the direction
of the arrow.
X
To remove the insert: press retaining
lug : and pull insert = upwards and out.
X
To install the insert: install insert = from
above.
X
To close: close cover ; fully.
Cigarette lighter
G
WARNING
When leaving the vehicle, always remove the
SmartKey from the ignition lock. Always take
the SmartKey with you and lock the vehicle.
Do not leave children unattended in the
vehicle, even if they are secured in a child
restraint system, or with access to an
unlocked vehicle. A child's unsupervised
access to a vehicle could result in an accident
and/or serious personal injury. The children
could:
R
injure themselves on parts of the vehicle
R
be seriously or fatally injured through
excessive exposure to extreme heat or cold
R
injure themselves or cause an accident with
vehicle equipment that can be operated
even if the SmartKey is removed from the
ignition lock or removed from the vehicle,
such as seat adjustment, steering wheel
adjustment, or the memory function
If children open a door, they could injure other
persons or get out of the vehicle and injure
themselves or be injured by following traffic.
Do not expose the child restraint system to
direct sunlight. The child restraint system's
metal parts, for example, could become very
hot, and the child could be burned on these
parts.
G
WARNING
Never touch the heating element or sides of
the lighter; they are extremely hot. Hold the
knob only.
Make sure any children traveling with you do
not injure themselves or start a fire with the
hot cigarette lighter.
!
The 12 V socket in the cigarette lighter
can be used for accessories (up to a
maximum of 180 W), as long as they have
the standard socket type for cigarette
lighters.
Note that the socket in the cigarette lighter
can be damaged when connecting
accessories, for example by:
R
frequent insertion and removal
R
sockets that do not fit correctly
A damaged socket can cause the cigarette
lighter to stop working.
X
Press in cigarette lighter :.
Cigarette lighter : will pop out
automatically when the heating element is
red-hot.
264
Features
Stowage and features
12 V sockets
General notes
!
If you are simultaneously using all three
sockets in the vehicle, make sure that you
do not exceed the maximum current draw
of 45 A. Otherwise, you will overload the
fuses.
The sockets can be used for accessories with
a maximum current draw of 180 W (15 A)
each, e.g. bulbs or chargers for mobile
phones.
If you use the sockets for long periods when
the engine is switched off, the battery may
discharge.
X
Turn the SmartKey to position 2 in the
ignition lock.
Socket in the front-passenger footwell
X
Lift up the cover of the socket.
i
The cigarette lighter socket can be also
used (Y page 264). This is the case even if
the SmartKey has been removed from the
ignition lock.
Socket in the rear compartment
The socket is located on the center console
in the rear compartment.
X
Lift up the cover of the socket.
Socket in the cargo compartment
The socket is located in the cargo
compartment on the left-hand side, when
viewed in the direction of travel, next to the
rear door.
X
Lift up the cover of the socket.
115 V socket
G
WARNING
The 115 VAC power socket operates on high
voltage. Use the 115 V AC power socket in
the vehicle with the same caution and care
that you would take with power sockets at
home. Keep fluids away from the 115 V AC
power socket. Do not use liquids or sharp
tools to clean the power socket. Keep the
cover of the 115 V AC power socket closed
Features
265
Stowage and features
Z
when not in use. Otherwise, you could suffer
an electric shock and be seriously or even
fatally injured.
G
WARNING
Any device that you connect must have a
suitable plug and meet U.S. standards. Never
pull at a cable to disconnect a plug from a
115 V AC power socket. Never use a damaged
connection cable. The 115 V AC power socket
must never be connected to another 115 V
AC power source. Do not use a converter with
an earthed plug for the 115 V AC power
socket. This could cause serious injury to you
and/or other people.
G
WARNING
If the 115 V AC power socket is damaged or
pulled out of the trim, do not use or touch the
115 V AC power socket. The use of a 115 V
AC power socket that has been damaged or
pulled out of the trim could cause serious
injury to you or others.
115 V power socket : provides an AC
voltage of 115 V so that small electronic
devices can be connected. These devices,
such as games consoles, chargers and
laptops, should not consume more than a
maximum of 150 W altogether.
Requirements for operation of these devices:
R
the 12 V sockets in the rear compartment
and the cargo compartment are
operational (Y page 265).
R
the plug of the electronic device is plugged
into 115 V power socket :.
R
the on-board power supply is within a
permissible voltage range.
R
the electronic device's maximum power
output does not exceed 150 W.
X
Open flap =.
X
Switch on the ignition.
X
Insert the plug of the electronic device into
115 V power socket :.
Indicator lamp ; lights up.
If indicator lamp ; does not light up,
please read the section on malfunctions.
X
To turn off: disconnect the plug from
115 V power socket :.
Ensure that you do not pull on the cord.
X
Close flap =.
Possible causes of malfunctions:
R
the on-board power supply is not within a
permissible voltage range.
R
the temperature of the DC/AC converter is
temporarily too high.
R
some small electronic devices have a
constant nominal power of less than
150 W, but a very high switch-on current.
In that case, there is a possibility that these
devices will not function properly as 115 V
socket : is not able to provide a high
enough current.
X
If indicator lamp ; still does not light up,
contact a qualified specialist workshop.
mbrace
Important safety notes
!
You must have a license agreement to
activate the mbrace service. Ensure that
your system is activated and ready for use,
266
Features
Stowage and features
and press the E MB Info call button to
register. If one of these steps is not carried
out, it may not be possible to activate the
system.
If you have questions about the activation,
contact one of the following telephone
hotlines:
R
USA: Response Center at
1-888-990-9007
R
Canada: Customer Service at
1-888-923-8367
USA only: shortly after successfully
registering with the mbrace service a user ID
and password will be sent to you by post. You
can use this password to log onto the mbrace
area under "Owners Online" at
.
The mbrace system is available if:
R
it has been activated and is operational.
Activation requires an available mobile
phone network, a valid SIM card and a
subscription to a security service.
R
the battery is sufficiently charged.
R
the corresponding mobile phone network
is available for transmitting data to the
Customer Center.
i
Determining the location of the vehicle on
a map is only possible if there is sufficient
GPS reception and the vehicle position can
be forwarded to the Customer Center.
The mbrace system
To adjust the volume during an mbrace call,
proceed as follows:
X
Press the W or X button on the
multifunction steering wheel.
or
X
Use the COMAND volume control.
The mbrace system provides three different
services:
R
automatic and manual emergency call
R
Roadside Assistance call
R
MB Info call
USA only: you can find further information
and a description of all available features
under "Owners Online" at
System self-test
G
WARNING
A malfunction in the system has been
detected if one of the following conditions
occurs:
R
the indicator lamp in the SOS button does
not light up during the system self-
diagnosis.
R
the indicator lamp in the º Roadside
Assistance button does not light up during
the system self-diagnosis.
R
the indicator lamp in the E information
button does not light up during the system
self-diagnosis.
R
the indicator lamp in the SOS button,
º Roadside Assistance button or E
information button continues to be lit red
after the system self-diagnosis.
R
the
TeleTele AidAid inoperativeinoperative or TeleTele AidAid
not activated
not activated message appears on the
multifunction display after the system self-
diagnosis.
If a malfunction is indicated as outlined above,
the system may not operate as expected. In
the event of an emergency, assistance must
be summoned by other means.
Have the system checked at the nearest
authorized Mercedes-Benz Center or contact
the following service hotlines:
R
USA: Response Center at
1-888-990-9007
R
Canada: Customer Service at
1-888-923-8367
After you have switched on the ignition, the
system carries out a self-diagnosis.
Features
267
Stowage and features
Z
Emergency call
Important safety notes
G
WARNING
If the indicator lamp in the SOS button is
flashing continuously and there was no voice
connection to the Response Center
established, then the mbrace system could
not initiate an emergency call (e.g. the
relevant cellular phone network is not
available).
The message
Call FailedCall Failed appears in the
multifunction display for approximately
10 seconds.
Should this occur, assistance must be
summoned by other means.
!
You must have a license agreement to
activate the mbrace service. Ensure that
your system is activated and ready for use,
and press the E MB Info call button to
register. If one of these steps is not carried
out, it may not be possible to activate the
system.
If you have questions about the activation,
contact one of the following telephone
hotlines:
R
USA: Response Center at
1-888-990-9007
R
Canada: Customer Service at
1-888-923-8367
An emergency call is dialed automatically if
an air bag or Emergency Tensioning Device is
triggered.
i
An automatically dialed mbrace
emergency call cannot be canceled.
An emergency call can also be initiated
manually.
As soon as the emergency call has been
initiated, the indicator lamp in the SOS button
flashes. The
Connecting CallConnecting Call message
appears on the multifunction display.
COMAND is muted.
Once the connection has been made, the
Call ConnectedCall Connected message appears in the
multifunction display.
All important information on the emergency
is provided, for example:
R
Current location of the vehicle (as
determined by the GPS system)
R
Vehicle model
R
Vehicle color
R
Vehicle identification number
A short time after the emergency call is
initiated, a voice connection is automatically
established between the Response Center
and the vehicle occupants. If the vehicle
occupants are able to respond, the Response
Center will attempt to obtain more detailed
information on the emergency.
i
If there is no response from the vehicle
occupants, an ambulance is immediately
sent to the vehicle.
Making an emergency call
G
WARNING
If you feel at any way in jeopardy when in the
vehicle (e.g. smoke or fire in the vehicle,
vehicle in a dangerous road location), please
do not wait for voice contact after you have
pressed the SOS button. Carefully leave the
vehicle and move to a safe location. The
Response Center will automatically contact
local emergency officials with the vehicle's
approximate location if they receive an
automatic SOS signal and cannot make voice
contact with the vehicle occupants.
268
Features
Stowage and features
X
To initiate an emergency call
manually: press cover : briefly to open.
X
Press SOS button ; briefly.
The indicator lamp in SOS button ;
flashes until the emergency call is
concluded.
X
Wait for the voice connection with the
Response Center.
X
After the emergency call, close cover :.
Roadside Assistance button
X
Open the stowage compartment under the
armrest (Y page 258).
X
Press Roadside Assistance button : for
more than two seconds.
A call to a Mercedes-Benz Roadside
Assistance Representative is initiated.
Indicator lamp ; in Roadside Assistance
button : flashes while the call is active.
The
ConnectingConnecting CallCall message appears in
the multifunction display and the COMAND
system is muted.
If a connection can be made, the
CallCall
Connected
Connected message appears in the
multifunction display.
If a mobile phone network is available and
there is sufficient GPS reception, the mbrace
system transmits data to the Response
Center, for example:
R
Current location of the vehicle
R
Vehicle identification number
R
Vehicle model
R
Vehicle color
i
The COMAND display shows that an
mbrace call is active. You can switch to the
navigation menu during the call by pressing
the NAVI button on COMAND. Voice output
is not available.
A voice connection is established between
the Mercedes-Benz Roadside Assistance
Representative and the vehicle occupants.
The Mercedes-Benz Roadside Assistance
Representative either sends a qualified
Mercedes-Benz technician or makes
arrangements for your vehicle to be
transported to the nearest authorized
Mercedes-Benz Center. You may be charged
for services such as repair work and/or
towing. Further details are available in your
mbrace manual.
X
Describe the type of assistance needed.
i
If the indicator lamp in Roadside
Assistance button : is flashing
continuously and no voice connection with
the Response center has been established,
then the mbrace system has not been able
to initiate a Roadside Assistance call (e.g.
the relevant mobile phone network is not
available). The
Call FailedCall Failed message
appears in the multifunction display.
X
To end a call: press the ~ button on the
multifunction steering wheel.
or
X
Press the corresponding button for ending
a phone call on COMAND.
i
Sign and drive services
1
: you are not
charged for services such as jump-starting,
providing a few gallons of fuel for a fuel tank
that has been run dry or changing a faulty
tire with the vehicle's own spare wheel.
1
USA only.
Features
269
Stowage and features
Z
MB Info call button
X
Open the stowage compartment under the
armrest (Y page 258).
X
Press Roadside Assistance button : for
more than two seconds.
A call to a Mercedes-Benz Roadside
Assistance Representative is initiated.
Indicator lamp ; in Roadside Assistance
button : flashes while the call is active.
The
ConnectingConnecting CallCall message appears in
the multifunction display and the COMAND
system is muted.
If a connection can be made, the
CallCall
Connected
Connected message appears in the
multifunction display.
If a mobile phone network is available and
there is sufficient GPS reception, the mbrace
system transmits data to the Response
Center, for example:
R
Current location of the vehicle
R
Vehicle identification number
R
Vehicle model
R
Vehicle color
i
The COMAND display shows that an
mbrace call is active. You can switch to the
navigation menu during the call by pressing
the NAVI button on COMAND. Voice output
is not available.
A voice connection between the Response
Center and the vehicle occupants is
established. You can obtain information on
how to operate your vehicle's systems, on the
location of the nearest authorized Mercedes-
Benz Center, and on further products and
services offered by Mercedes-Benz USA.
You can find further information on the
mbrace system at
2
Log in under "Owners
Online".
i
If the indicator lamp in MB Info call
button : is flashing continuously and no
voice connection with the Response center
has been established, then the mbrace
system has not been able to initiate an MB
Info call (e.g. the relevant mobile phone
network is not available). The
CallCall
Failed
Failed message appears in the
multifunction display.
X
To end a call: press the ~ button on the
multifunction steering wheel.
or
X
Press the corresponding button for ending
a phone call on COMAND.
Call priority
When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergency
call can still be initiated. In this case, an
emergency call has the highest priority and
takes precedence over all other active calls.
The indicator lamp of the respective button
flashes until the call is ended. An emergency
call can only be terminated by the Response
Center. All other calls can be ended by
pressing the ~ button on the
multifunction steering wheel or the
corresponding COMAND button for ending a
telephone call.
i
When an mbrace call has been initiated,
COMAND is muted. The mobile phone is no
longer connected to COMAND. However, if
you want to use your mobile phone, we
recommend that you do this only when the
vehicle is stationary and in a safe location.
2
USA only.
270
Features
Stowage and features
Downloading destinations in COMAND
Destination Download gives you access to a
database with over ten million points of
interest (POIs) which can be downloaded onto
the navigation system of your vehicle. If you
know the destination, you can download the
address or obtain the location of points of
interest (POIs) or important destinations in
the surrounding area.
You are prompted to confirm route guidance
to the address entered.
i
Information on the components and
operating principles of the COMAND
system can be found in the separate
COMAND operating instructions.
X
Select
YesYes with the = or ; button
on COMAND.
X
Confirm with the 9 button on COMAND.
The system calculates the route and
subsequently starts the route guidance with
the address entered.
i
If you select NoNo, the address can be stored
in the address book.
i
The Destination Download function is
available if the corresponding mobile
phone network is available and data
transfer is possible.
Search & Send
"Search & Send" is a destination entry
service. You can find further information on
"Search & Send" in the separate COMAND
operating instructions.
Vehicle remote opening
If you have unintentionally locked your
vehicle (e.g. the SmartKey is inside the
vehicle) and a replacement key is not
available:
X
Contact the following service hotlines:
R
USA: Response Center at
1-888-990-9007
R
Canada: Customer Service at
1-888-923-8367
You will be asked for your password.
X
Return to your vehicle at the time arranged
with the Response Center.
X
Press the release button on the door handle
of the rear door for at least 20 seconds until
the indicator lamp in the SOS button
(Y page 268) flashes.
The
Connecting CallConnecting Call message appears
on the multifunction display.
Alternatively, the vehicle can be opened via
the Internet in the "Owner's Online" section
using your identification number and
password
3
.
i
Vehicle remote opening is only possible if
the corresponding mobile phone network
is accessible.
The SOS button flashes and the
ConnectingConnecting CallCall message appears in the
multifunction display to confirm that the
command for vehicle remote unlocking has
been received.
If the lock cylinder on the rear door is
pressed for longer than 20 seconds before
receiving authorization for remote
unlocking from the Response center, you
must wait 15 minutes before you can press
the lock cylinder on the rear door again.
Vehicle remote closing
The remote closing feature can be used when
you have forgotten to lock the vehicle and you
are no longer nearby. The vehicle can then be
locked by the Mercedes-Benz Customer
Assistance Center.
The vehicle can be remotely locked within
four days of the ignition being turned off.
X
Contact the following service hotlines:
3
USA only.
Features
271
Stowage and features
Z
R
USA: Mercedes-Benz Customer
Assistance Center at 1-800-FOR-
MERCedes (1-800-367-6372) or
1-888-990-9007
R
Canada: Customer Service at
1-888-923-8367
You will be asked for your PIN.
The next time you are inside the vehicle and
you switch on the ignition, the
Tele AidTele Aid
Doors Locked Remotely
Doors Locked Remotely message appears
in the multifunction display.
USA only: alternatively, the vehicle can be
locked via:
R
the Internet, under the "Owners Online"
section
R
the telephone application (e.g. iPhone
®
,
Blackberry)
To do this, you will need your identification
number and password.
i
The vehicle remote closing feature is
available when the relevant mobile phone
network is available and data connection is
possible.
Stolen vehicle recovery service
If your vehicle has been stolen:
X
Contact the police.
The police will issue an incident report. This
report has a number.
X
Forward this number to the Response
Center together with your PIN.
The Response Center will then attempt to
covertly contact the mbrace system. The
Response Center contacts you and the
local law enforcement authority if the
vehicle is located. However, only the law
enforcement agency is informed of the
location of the vehicle.
i
If the anti-theft alarm system is active for
longer than 30 seconds, mbrace is
automatically connected with the
Customer Assistance center.
Vehicle remote malfunction diagnosis
With the vehicle remote malfunction
diagnosis (Vehicle Health Check), the
Customer Assistance center can provide
improved support for problems with your
vehicle. During an existing call, vehicle data
is transferred to the Customer Assistance
center. The customer service representative
can use the received data to decide what kind
of assistance is required. You are then, for
example, guided to the nearest Mercedes-
Benz Service center or a recovery vehicle is
called.
If vehicle data needs to be transferred during
an MB Info call or a Roadside Assistance call,
this is initiated by the Customer Assistance
center. You will see the
RoadsideRoadside
Assistance Connected
Assistance Connected message in the
COMAND display. If the vehicle remote
malfunction diagnosis is able to be started,
the
Request for vehicle diagnosisRequest for vehicle diagnosis
received. Start vehicle diagnosis?
received. Start vehicle diagnosis?
message appears in the display.
X
Press
YesYes to confirm the message.
X
If the
Vehicle Diagnosis: PleaseVehicle Diagnosis: Please
start ignition
start ignition message appears: turn
the SmartKey to position 2 in the ignition
lock.
X
If the
Please follow thePlease follow the
instructions
instructions receivedreceived byby phonephone andand
move your vehicle into a safemove your vehicle into a safe
positionposition message appears: follow the
instructions of the customer service
representative.
The message in the display disappears.
If you select
CancelCancel, the vehicle remote
malfunction diagnosis is canceled
completely.
The vehicle operating state check begins.
Meanwhile, the
Vehicle diagnosisVehicle diagnosis
activated
activated message appears.
When the check is finished, the
SendingSending
vehicle diagnosis data... (Voicevehicle diagnosis data... (Voice
connection may be interruptedconnection may be interrupted
duringduring datadata transfer)transfer) message appears.
272
Features
Stowage and features
The vehicle data can now be sent to the
Customer Assistance center.
X
Press
OKOK to confirm the message.
The voice connection with the Customer
Assistance center is terminated.
The
Vehicle Diagnosis:Vehicle Diagnosis:
Transferring data...
Transferring data... message
appears.
The vehicle data is sent to the Customer
Assistance center.
Depending on what the customer service
representative agreed with you, the voice
connection is re-established after the transfer
is complete. If necessary, you will be
contacted at a later time by another means,
e.g. by e-mail or phone.
Further functions of the vehicle remote
malfunction diagnosis include, for example:
R
transfer of service data to the Customer
Assistance center. If a service is overdue,
the COMAND display shows a message
about various special offers at your
workshop.
R
monthly status information e-mail on oil
level, air pressure, maintenance, brakes,
etc. If applicable, you will receive
information on special offers in the e-mail.
USA only: this information can also be
called up under "Owners Online" at
Information on the data stored in the vehicle
(Y page 25).
Information on Roadside Assistance
(Y page 22).
Downloading routes
Downloading routes allows you to transfer
and save predefined routes in the navigation
system. To do this, an SD memory card must
be inserted into the COMAND system. If no
SD memory card is inserted, you must insert
the card into the card slot on the COMAND
system before saving.
A route can be prepared and sent either by a
customer service representative or via the
mbrace portal on the Internet. Each route can
include up to 20 way points. When a route has
been received by the navigation system, the
'Route name' has been saved to'Route name' has been saved to
memory card. Do you want to startmemory card. Do you want to start
route guidance?route guidance? message appears on the
COMAND display. The route is saved to the
SD memory card.
X
To start route guidance: select
YesYes.
An overview of the route is shown in the
display.
i
If you select NoNo, the saved route can be
called up later in the navigation menu.
X
Select
StartStart.
Route guidance is started.
i
Downloaded and saved data can be called
up again in COMAND. Further information
can be found in the "COMAND", "Online
and Internet services" and "Download
destination/route" sections.
Speed alert
You can define the upper speed limit, which
must not be exceeded by the vehicle. If this
selected speed is exceeded by the vehicle, a
message will be sent to the Customer
Assistance center. The Customer Assistance
center then forwards this information to you.
You can select the way in which you receive
this information beforehand. Possible options
include text message, e-mail or an automated
call.
The data which is sent to the Customer
Assistance center contains the following
information:
R
the location where the speed limit was
exceeded
R
the time at which the speed limit was
exceeded
R
the selected speed limit which was
exceeded
Features
273
Stowage and features
Z
Geo fencing
Geo fencing allows you to select areas which
the vehicle should not enter or leave. You will
be informed if the vehicle crosses the
boundaries of the selected areas. You can
select the way in which you receive this
information beforehand. Possible options
include text message, e-mail or an automated
call.
The area can be determined as either a circle
or a polygon with a maximum of ten corners.
You can specify up to ten areas
simultaneously. Different settings are
possible for each area.
USA only: these settings can be called up
under "Owners Online" at
Alternatively, you can trigger an MB Info call
and inform the customer service
representative that you wish to activate geo
fencing.
Currently inactive areas can be activated by
text message.
Triggering the vehicle alarm
With this function, you can trigger the
vehicle's panic alarm via text message. An
alarm sounds and the exterior lighting
flashes. Depending on the setting, the panic
alarm lasts five or ten seconds. Afterwards,
the alarm switches off.
Brush guard (USA only)
G
WARNING
The brush guard is designed solely to enhance
the appearance of the vehicle and help
protect grille and headlamps from minor
mishaps, either on or off road.
Since the safety characteristics are limited in
the event of an accident, brush guard are not
intended to prevent injury or damage in the
event of an accident. Also observe state and
local regulations on installation and use.
Raise and lower the brush guard in an open
space with plenty of room.
i
If you wish to remove the brush guard,
contact a qualified specialist workshop.
Garage door opener
Important safety notes
G
WARNING
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent
potential harm or damage. When
programming a garage door opener, the door
moves up or down. When programming a gate
operator, the gate opens or closes.
Do not use the integrated remote control with
any garage door opener that lacks safety stop
and reverse features as required by U.S.
federal safety standards (this includes any
garage door opener model manufactured
before April 1, 1982). A garage door that
cannot detect an object - signaling the door
to stop and reverse - does not meet current
U.S. federal safety standards.
When programming a garage door opener,
park vehicle outside the garage.
Do not run the engine while programming the
integrated remote control. Inhalation of
exhaust gas is hazardous to your health. All
exhaust gas contains carbon monoxide (CO),
and inhaling it can cause unconsciousness
and possible death. All exhaust gas contains
carbon monoxide (CO), and inhaling it can
cause unconsciousness and possible death.
You can use the HomeLink
®
garage door
opener integrated into the rear-view mirror to
operate up to three different gate/garage
door opener systems.
274
Features
Stowage and features
i Certain garage door drives are
incompatible with the integrated garage
door opener. If you have difficulty
programming the integrated garage door
opener, contact an authorized Mercedes-
Benz Center. You can also contact the
following service hotlines:
R
USA: Mercedes-Benz Customer
Assistance Center at
1-800-FOR-MERCedes
R
Canada: Customer Service at
1-800-387-0100
i
USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
i
Canada only:
This device complies with the RSS-210
Rules of Industry Canada. Operation is
subject to the following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
Programming the remote control
Programming
G
WARNING
Only press the button on the integrated
garage door opener if there are no persons or
objects present within the sweep of the
garage door. Persons could otherwise be
injured as the door moves.
Integrated remote control in the rear-view mirror
:
Indicator lamp
;=?
Transmitter buttons
A
Garage door remote control
B
Transmitter button on the garage
door remote control
Garage door remote control A is not part of
the garage door opener.
i
To achieve the best result, insert new
batteries in garage door remote control
A of your garage door drive before
programming.
X
Delete the memory of the integrated
remote control (Y page 278) before
programming it for the first time.
X
Turn the SmartKey to position
2(Y page 139) in the ignition lock.
X
Press and hold transmitter button ;, =
or ?.
After a short time, indicator lamp : will
start flashing. It flashes approximately
once per second.
i
Indicator lamp : flashes immediately
the first time that the transmitter button is
programmed. If this transmitter button has
already been programmed, indicator
lamp : will only start flashing at a rate of
once a second after 20 seconds have
elapsed.
X
Continue to hold the transmitter button.
Features
275
Stowage and features
Z
X
Point transmitter button A of garage door
remote control B towards the transmitter
buttons on the rear-view mirror at a
distance of 2 to 12 inches (5 to 30 cm).
i
The distance between garage door
remote control A and the integrated
garage door opener depends on the system
of the garage door drive. Several attempts
might be necessary. You should test every
position for at least 20 seconds before
trying another position.
X
Keep transmitter button B on garage door
remote control A pressed until indicator
lamp : starts to flash rapidly.
The programming has been successful if
indicator lamp : flashes rapidly.
X
Release transmitter buttons ;, = or ?
on the integrated remote control and
transmitter button B on the garage door
remote control.
If indicator lamp : goes out after
approximately 20 seconds and has not
flashed rapidly:
X
Release transmitter buttons ;, = or ?
on the integrated remote control and
transmitter button B on the garage door
remote control.
X
Repeat the procedure for the other
transmitter buttons. When doing so, vary
the distance between the garage door's
remote control and the transmitter buttons
in the rear-view mirror.
i
If the garage door system works with a
rolling code, you must synchronize the
remote control integrated in the rear-view
mirror with the garage door system
receiver after programming.
You will find further information in the
garage door opening system's operating
instructions, e.g. the sections on
"Synchronizing the transmitter" or
"Registering a new transmitter". You can
also call the hotline mentioned above.
Synchronizing the rolling code
Integrated remote control in the rear-view mirror
:
Indicator lamp
;=?
Transmitter buttons
A
Garage door remote control
B
Transmitter button on the garage
door remote control
Your vehicle must be within reach of the
garage door or exterior gate drive. Make sure
that neither your vehicle nor any persons/
objects are present within the sweep of the
door or gate.
Observe the safety notes when performing
the rolling code synchronization
(Y page 274).
X
Turn the SmartKey to position
2(Y page 139) in the ignition lock.
X
Press the programming button of the door
or gate drive (see the door or gate drive
operating instructions, e.g. under
"Programming of additional remote
controls").
i
Usually, you now have 30 seconds to
initiate the next step.
X
Press previously programmed button ;,
= or ? of the integrated garage door
opener until the door closes.
The rolling code synchronization is then
complete.
Notes on programming the remote
control
Canadian radio frequency laws require a
"break" (or interruption) of the transmission
276
Features
Stowage and features
signals after broadcasting for a few seconds.
Therefore, these signals may not last long
enough for the integrated remote control to
recognize the signal during programming.
Comparable with Canadian law, American
garage door openers also have a built-in
"interruption".
If you live in Canada or have difficulties
programming the garage door opener
(regardless of where you live) when using the
programming steps, proceed as follows:
Integrated remote control in the rear-view mirror
:
Indicator lamp
;=?
Transmitter buttons
A
Garage door remote control
B
Transmitter button on the garage
door remote control
X
Keep the transmitter button (;, = or ?)
depressed until the integrated remote
control has been set up successfully.
X
At the same time, press transmitter button
B of the garage door remote control for
two seconds, then release it for two
seconds, then press it again for two
seconds.
X
Repeat this sequence on transmitter
button B of the garage door remote
control until the frequency signal has been
saved.
X
If the setup procedure is successful,
indicator lamp : flashes once slowly and
goes out after a few seconds.
X
Continue with the other programming
steps (see above).
Problems when programming
Integrated remote control in the rear-view mirror
:
Indicator lamp
;=?
Transmitter buttons
A
Garage door remote control
B
Transmitter button on the garage
door remote control
If you have problems when programming the
integrated remote control, please note the
following:
R
Check the transmitter frequency of garage
door remote control A (which can usually
be found on the back of the remote
control).
The integrated remote control is
compatible with devices that have units
which operate in the frequency range of
280 to 390 MHz.
R
Replace the batteries in garage door
remote control A. This increases the
probability of garage door remote control
A sending a strong and more precise
signal to the integrated remote control on
the rear-view mirror.
R
When programming, hold garage door
remote control A at varying distances and
angles from the transmitter button which
you are programming. Try various angles at
a distance between 2and 12 inches (5to
30 cm) or at the same angle but at varying
distances.
R
If there is another garage door remote
control for the same device, perform the
programming steps again using that garage
Features
277
Stowage and features
Z
door opener. Before performing these
steps, make sure that new batteries have
been inserted in the garage door remote
control.
R
Align the antenna cable of the garage door
opener unit. This can improve signal
reception/transmission.
Opening/closing the garage door
:
Indicator lamp
;=?
Transmitter buttons
A
Garage door remote control
B
Transmitter button on the garage
door remote control
Once programmed, the integrated remote
control will assume the function of the garage
door system's remote control. Please also
read the operating instructions for the garage
door system.
X
Turn the SmartKey to position
2(Y page 139) in the ignition lock.
X
Press transmitter button ;, = or ? on
the integrated remote control in the rear-
view mirror that is programmed to operate
the garage door.
Garage door system with fixed code:
indicator lamp : lights up continuously.
Garage door system with rolling code:
indicator lamp : flashes briefly and then
lights up for approximately two seconds.
This is repeated for up to 20 seconds.
i
The transmitter will transmit a signal for
as long as the transmitter button is being
pressed. The transmission will be halted
after a maximum of 20 seconds and
indicator lamp : will flash. Press the
transmitter button again, if necessary.
Clearing the remote control memory
:
Indicator lamp
;=?
Transmitter buttons
A
Garage door remote control
B
Transmitter button on the garage
door remote control
X
Turn the SmartKey to position
2(Y page 139) in the ignition lock.
X
Press and hold transmitter buttons ;
and ? for approximately 20 seconds until
indicator lamp : flashes rapidly.
The memory is cleared.
i
You should clear the remote control
memory before selling the vehicle.
Floormat on the driver's side
G
WARNING
Whenever you are using a floormat, make sure
there is enough clearance and that the
floormat is securely fastened.
The floormat should always be securely
fastened using the fastening equipment.
Before driving off, check that the floormat is
securely in place and adjust it if necessary. A
loose floormat could slip and hinder proper
functioning of the pedals.
Do not place several floormats on top of each
other as this may impair pedal movement.
278
Features
Stowage and features
X
Slide the seat backwards.
X
To install: place the floormat in the
footwell.
X
Press studs : onto retainers ;.
X
To remove: pull the floormat out of
retainers ;.
X
Remove the floormat.
Features
279
Stowage and features
Z
280

Related Topics

Stowage and features
Useful information Loading guidelines Stowage areas

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot