2019-2024 Mercedes G Class SUV Instrument display and on-board computer User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instrument display and on-board computer for Your Mercedes G Class SUV Fourth Generation (2019-2024)

Notes on the instrument display and on-board
computer
&
WARNING Risk of accident if the instru-
ment display fails
If the instrument display has failed or is mal-
functioning, function restrictions in systems
relevant to safety cannot be detected.
The operating safety of your vehicle may be
impaired.
#
Drive on carefully.
#
Have the vehicle checked immediately at
a qualied specialist workshop.
&
WARNING Risk of distraction from infor-
mation systems and communications
equipment
If you operate information systems and com-
munication devices integrated in the vehicle
when driving, you could be distracted from the
trac situation. This could also cause you to
lose control of the vehicle.
#
Only operate this equipment when the
trac situation permits.
#
If you cannot be sure of this, stop the
vehicle whilst paying attention to road
and trac conditions and operate the
equipment with the vehicle stationary.
*
NOTE Mercedes-AMG vehicles
#
Observe the notes in the Supplement.
You could otherwise fail to recognize
dangers.
You must observe the legal requirements for the
country in which you are currently driving when
operating the on-board computer.
The on-board computer shows only display mes-
sages and warnings from specic systems on the
instrument display. You must therefore ensure
that your vehicle is always safe to operate.
If the operating safety of your vehicle is impaired,
park the vehicle immediately and in accordance
with the trac conditions. Contact a qualied
specialist workshop.
Instrument display and on-board computer
201
Overview of instrument display
1
Speedometer
The segments on the speedometer indicate
the status of the following systems: cruise
control / Active Distance Assist DISTRONIC
2
Outside temperature
3
Instrument display (example: standard display
for trip): service / assistance / trip / naviga-
tion / radio / media / telephone / designs
4
Time
5
Area for additional values (example: tachome-
ter): tachometer / navigation / ECO display /
consumption / G-meter / date
The fuel supply will be interrupted to protect
the engine when the red mark on the tachom-
eter (overrevving range) is reached.
6
Coolant temperature display
During normal operating conditions, coolant
temperature display is permitted to rise to the
red mark.
7
Selected transmission position
8
Fuel level and fuel ller ap location indicator
9
Selected drive program
202
Instrument display and on-board computer
Overview of buttons on the steering wheel
1
P Back/Home button (press and hold),
on-board computer
2
Touch Control, on-board computer
3
Control panel for cruise control or Active Dis-
tance Assist DISTRONIC
4
Control panel for the multimedia system
£ Voice Control System (/ page 205)
5
ò Main menu, multimedia system
6
Touch Control multimedia system
7
G Back button (multimedia system)
8
Brightness control to adjust the lighting in the
Instrument Display and in the control ele-
ments of the vehicle interior
Operating the on-board computer
Observe the legal requirements for the country in
which you are currently driving when operating
the on-board computer.
The on-board computer is operated using the le-
hand Touch Control and the le-hand back/home
button.
When the on-board computer is being operated,
dierent acoustic signals will sound as operating
feedback, e.g. when you reach the end of a list.
The following menus are available:
R
Service
R
DriveAssist
R
Trip
R
Navigation
R
Radio
R
Media
R
Phone
R
Designs
%
You can nd information about the possible
settings and selections on the menus in the
Digital Operator's Manual.
The menus can be called up from the menu bar
on the instrument display.
Instrument display and on-board computer
203
#
To call up the menu bar: press the le-hand
back button until the menu bar is displayed.
%
Vehicles without Active Distance Assist
DISTRONIC: press the ò button to call up
the menu bar of the on-board computer.
#
To scroll on the menu bar: swipe to the le or
right on the le-hand Touch Control.
#
To call up a menu, submenu or possible set-
tings on the menu, or conrm a selection or
setting: press the le-hand Touch Control.
#
To scroll through displays or lists on the
menu, or select display content, a function,
an entry or a display: swipe upwards or down-
wards on the le-hand Touch Control.
#
To exit a submenu: press the le-hand back
button.
Displaying full-screen menus
You can display the following menus full-screen on
the instrument display:
R
DriveAssist
R
Trip
#
On the corresponding menu, use the le-hand
Touch Control to scroll to the end of the list.
#
Press the le-hand Touch Control.
The selected menu will be displayed full-
screen.
Overview of displays on the instrument display
Displays on the instrument display:
Z
Gearshi recommendation (/ page 144)
ë
Active Parking Assist activated
(/ page 193)
é
Parking Assist PARKTRONIC switched o
(/ page 190)
h
Cruise control (/ page 167)
ç
Active Distance Assist DISTRONIC
(/ page 169)
æ
Active Brake Assist (/ page 175)
Ã
Active Lane Keeping Assist (/ page 177)
è
ECO start/stop function (/ page 135)
+
O-road gear (/ page 146)
Ì
On-road position (/ page 146)
ë
HOLD function (/ page 165)
_
Adaptive Highbeam Assist (/ page 109)
Vehicles with Trac Sign Assist: Detected instruc-
tions and trac signs (/ page 175).
For an overview of the indicator and warning
lamps, see (/ page 440).
204
Instrument display and on-board computer

Related Topics

Popular Owner Manuals