2019-2024 Mercedes G Class SUV Seats and stowing -> Seats User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seats and stowing -> Seats for Your Mercedes G Class SUV Fourth Generation (2019-2024)

#
Use the grab handles only to stabilize the
seating position or to assist in getting in
and out of the seat.
Seats
Adjusting the front seat electrically
&
WARNING Risk of becoming trapped if the
seat is adjusted by children
Children could become trapped if they adjust
the seats, particularly if they are unattended.
#
When leaving the vehicle, always take the
key with you and lock the vehicle.
#
Never leave children unattended in the
vehicle.
You can adjust the seats when the vehicle is
switched o.
&
WARNING Risk of becoming trapped when
adjusting the seat
When you adjust a seat, you or other vehicle
occupants could become trapped, e.g. on the
seat guide rail.
#
When adjusting a seat, make sure that
no one has any part of their body within
the sweep of the seat.
Observe the safety notes on "Airbags" and "Chil-
dren in the vehicle".
&
WARNING Risk of accident due to adjust-
ing the vehicle settings while the vehicle is
in motion
You could lose control of the vehicle in the fol-
lowing situations in particular:
R
If you adjust the driver's seat, the head
restraint, the steering wheel or the mirror
while the vehicle is in motion
R
If you fasten your seat belt while the vehi-
cle is in motion
#
Before starting the vehicle: in particular,
adjust the driver's seat, head restraint,
steering wheel and mirror, and fasten
your seat belt.
&
WARNING Risk of becoming trapped if the
seat height is adjusted carelessly
If you adjust the seat height carelessly, you or
other vehicle occupants could be trapped and
thereby injured.
Children in particular could accidentally press
the electrical seat adjustment buttons and
become trapped.
#
While moving the seats, make sure that
hands or other body parts do not get
under the lever assembly of the seat
adjustment system.
Seats and stowing
81
&
WARNING Risk of injury due to head
restraints not being installed or being
adjusted incorrectly
If head restraints have not been installed or
have not been adjusted correctly, there is an
increased risk of injury in the head and neck
area, e.g. in the event of an accident or when
braking.
#
Always drive with the head restraints
installed.
#
Before driving o, make sure for every
vehicle occupant that the center of the
head restraint supports the back of the
head at about eye level.
Do not interchange the head restraints of the
front and rear seats. Otherwise, you will not be
able to adjust the height and angle of the head
restraints correctly.
Adjust the head restraint fore-and-a position so
that it is as close as possible to the back of your
head.
&
WARNING Risk of injury or death due to
an incorrect seat position
The seat belt does not oer the intended level
of protection if you have not moved the seat
backrest to an almost vertical position.
In particular, you could slip beneath the seat-
belt and become injured.
#
Adjust the seat properly before begin-
ning your journey.
#
Always ensure that the seat backrest is
in an almost vertical position and that
the shoulder belt is routed across the
center of your shoulder.
1
Head restraint height
2
Seat backrest inclination
3
Seat height
4
Seat cushion length
5
Seat cushion inclination
6
Seat fore-and-a position
#
Save the settings with the memory function
(/ page 90).
82
Seats and stowing
Head restraints
▌Adjusting the front seat luxury head restraints
manually
&
WARNING Risk of accident due to adjust-
ing the vehicle settings while the vehicle is
in motion
You could lose control of the vehicle in the fol-
lowing situations in particular:
R
If you adjust the driver's seat, the head
restraint, the steering wheel or the mirror
while the vehicle is in motion
R
If you fasten your seat belt while the vehi-
cle is in motion
#
Before starting the vehicle: in particular,
adjust the driver's seat, head restraint,
steering wheel and mirror, and fasten
your seat belt.
&
WARNING Risk of injury due to incorrectly
adjusted head restraints
If head restraints have not been adjusted cor-
rectly, there is an increased risk of injury in
the head and neck area, e.g. in the event of an
accident or sudden braking.
#
Before driving o, make sure for every
vehicle occupant that the center of the
head restraint supports the back of the
head at about eye level.
Adjust the head restraint fore-and-a position so
that it is as close as possible to the back of your
head.
#
To adjust the side bolsters of the head
restraint: pull or push right or le side bolster
2.
#
To move forwards: pull the head restraint for-
wards.
#
To move backwards: press release knob 1
and push the head restraint backwards.
Seats and stowing
83
▌Adjusting the head restraints of the rear seats
manually
#
To raise: pull the head restraint up.
#
To lower: press release knob 1 in the direc-
tion of the arrow and push the head restraint
down.
Adjusting the angle of the rear head restraints
You can adjust only the two outer head restraints.
#
Pull or push the bottom edge of the head
restraint forwards or backwards until the
desired position has been reached.
▌Installing/removing the rear seat head
restraints
Removing
#
Release the rear seat backrest and fold it for-
wards slightly (/ page 94).
#
Pull the head restraint upwards as far as it will
go.
#
Push release knob 1 in the direction of the
arrow and pull out the head restraint.
Installing
#
Insert the head restraint such that the notches
on the bar are on the le when viewed in the
direction of travel.
#
Push the head restraint down until it engages.
#
Fold the rear seat backrest back until it
engages.
Conguring the seat settings
Multimedia system:
4
Vehicle
5
a
Seats
#
Select Driver's Seat or Passenger Seat.
Adjusting the backrest side bolsters
#
Select Side Bolsters.
#
Adjust the air cushions.
84
Seats and stowing
Adjusting the seat contour in the lumbar region of
the seat backrest (lumbar)
#
Select Lumbar.
#
Adjust the air cushions.
Memory function
#
Save the seat settings with the memory func-
tion (/ page 90).
Setting automatic adjustment of the lateral sup-
port (active multicontour seat)
Multimedia system:
4
Vehicle
5
a
Seats
With this function, the lateral support of the active
multicontour seat is automatically adjusted to the
driving and cornering dynamics of the vehicle.
#
Select Driver's Seat or Passenger Seat.
#
Select Dynamic Seat.
#
Select setting: Off, Level 1 or Level 2.
Overview of massage and workout programs
Massage programs
The following programs can be selected:
R
Hot Relaxing Back
R
Hot Relaxing Shoulder
R
Activating Massage
R
Classic Massage
R
Wave Massage
R
Mobilizing Massage
Active Workout
The Act. Workout Back program requires your
active cooperation. Alternating between tensing
and releasing helps to improve blood ow to your
muscles. Press against a pressure point as soon
as you feel it.
Selecting a massage program for the front seats
Multimedia system:
4
Vehicle
5
a
Seats
#
Select Driver's Seat or Passenger Seat.
#
Select Massage.
#
Select a massage program.
The massage program will run for approx-
imately 8 to 18 minutes, depending on the set-
ting.
#
To set the massage intensity: switch High
Intensity
on O or o ª.
Resetting the seat and massage settings
Multimedia system:
4
Vehicle
5
a
Seats
5
Reset
#
Select Yes or No.
%
Only the currently selected seat is reset.
Switching the seat heating on/o
&
WARNING Risk of burns due to repeatedly
switching on the seat heating
Repeatedly switching on the seat heating can
cause the seat cushion and seat backrest pad-
ding to become very hot.
Seats and stowing
85
In particular, the health of persons with limited
temperature sensitivity or a limited ability to
react to high temperatures may be aected or
they may even suer burn-like injuries.
#
Do not repeatedly switch on the seat
heating.
To protect against overheating, the seat heating
may be temporarily deactivated aer it has been
switched on repeatedly.
*
NOTE Damage to the seats caused by
objects or documents when the seat heat-
ing is switched on
When the seat heating is switched on, over-
heating may occur due to objects or docu-
ments placed on the seats, e.g. seat cushions
or child seats. This could cause damage to the
seat surface.
#
Make sure that no objects or documents
are on the seats when the seat heating is
switched on.
Requirements
R
The power supply is switched on.
#
Press button 1 repeatedly until the desired
heating level is set.
Depending on the heating level, up to three
indicator lamps will light up. If all indicator
lamps are o, the seat heating is switched o.
%
The seat heating will automatically switch
down from the three heating levels aer 8, 18
and 35 minutes until the seat heating is
switched o.
86
Seats and stowing

Related Topics

Popular Owner Manuals