2020-2026 Mercedes GLA SUV Light and sight -> Changing bulbs (only for vehicles with halogen headlamps) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Light and sight -> Changing bulbs (only for vehicles with halogen headlamps) for Your Mercedes GLA SUV Second Generation (2020-2026)

Climate
R
If changes are made to the temperature set-
ting in the vehicle, the colour of the ambient
lighting will change briey.
Greeting
R
When you get into the vehicle, a special colour
animation will play.
Switching the interior lighting switch-o delay
time on/o
Multimedia system:
4
©
5
Settings
5
Lights
5
Interior/exterior lighting
5
Interior lighting delayed switch off
#
Activate or deactivate Interior lighting
delayed switch off
.
If this function is active, the interior lighting
will be switched on for a short time aer the
end of the journey.
Changing bulbs (only for vehicles with halogen
headlamps)
Notes on changing bulbs
&
WARNING Risk of burns from hot compo-
nent parts whilst replacing a bulb
Bulbs, lamps and plugs can become very hot
during operation.
When replacing a bulb, you could burn your-
self on these component parts.
#
Allow the component parts to cool down
before replacing the bulb.
R
Do not use an illuminant if it has been drop-
ped or if its glass has been scratched. The illu-
minant may otherwise explode.
R
Do not touch the glass bulb with your bare
hands.
R
Protect illuminants from moisture and do not
allow them to come into contact with liquids.
Overview of the bulbs to be changed
Halogen headlamps
1
High beam: H7 55 W bulb
2
Low beam: H7 55 W bulb
222
Light and sight
F247 0074 02
Changing the front bulbs (vehicles with halogen
headlamps)
▌Fitting/removing the cover in the front wheel
arch
Requirements:
R
The lighting system is switched o.
R
The appropriate front wheel is turned inwards.
#
To remove: turn cover 1 to the le and
remove it from the wheel arch liner.
#
To t: insert cover 1 into the wheel arch liner
and turn it to the right until it engages.
▌Replacing illuminants in the halogen headlamp
&
WARNING Risk of burns from hot compo-
nent parts whilst replacing a bulb
Bulbs, lamps and plug connectors can
become very hot during operation.
When replacing a bulb, you could burn your-
self on these component parts.
#
Allow the component parts to cool down
before replacing the bulbs.
Requirements
R
Low beam: an H7 55 W illuminant is available.
R
High beam: an H7 55 W illuminant is available.
1
Low beam housing cover
2
High beam housing cover
%
When the bonnet is open, you can reach
housing cover 2.
#
Switch the lighting system o.
#
Remove the cover in the front wheel arch
(/ page 223).
#
Turn the relevant housing cover anti-clockwise
and remove it.
#
Turn the socket anti-clockwise and remove it.
#
Pull the illuminant out of the socket.
Light and sight
223
F247 0074 02

Related Topics

Popular Owner Manuals