Get Light and visibility -> Windshield wiper and windshield washer Guide for Mercedes GLC Class SUV First Generation (2015-2021)

Light and visibility 137

Switching the rear window wiper on/off

4

5

° Continuous wiping, slow

¯ Continuous wiping, fast

Windshield wiper and windshield washer

system

Switching the windshield wipers on/off

#

Turn the combination switch to the correct

position 1 - 5.

#

Single wipe/washing: push the button on

the combination switch in the direction of

arrow 1.

R

í Single wipe

R

î Wipes with washer fluid

1

2

3

4

ô Wipes with washer fluid

° Switches on intermittent wiping

g Switches off intermittent wiping

ô Wipes with washer fluid

1

2

3

g Windshield wipers off

Ä Intermittent wiping, normal

Å Intermittent wiping, frequent

138 Light and visibility

#

Hold the wiper arm with one hand. With the

other hand, turn the wiper blade in the direc‐

tion of arrow 1 away from the wiper arm as

far as it will go.

Slide catch 2 in the direction of arrow 3

until it engages in the removal position.

Turn è switch 1 to the correct position

Within around 15 seconds, press the î

button on the combination switch for approx‐

imately three seconds (/ page 137).

The wiper arms will move into the replace‐

ment position.

1 - 4.

The è symbol will appear on the instru‐

ment cluster when the rear window wiper is

switched on.

#

Removing the wiper blades

#

Changing the windshield wiper blades

Remove the wiper blade from the wiper arm

in the direction of arrow 4.

Fold the wiper arms away from the wind‐

shield.

&

WARNING Risk of becoming trapped if

the windshield wipers are switched on

while wiper blades are being replaced

If the windshield wipers begin to move while

you are changing the wiper blades, you can

be trapped by the wiper arm.

#

Always switch off the windshield wipers

and the ignition before changing the

wiper blades.

Moving the wiper arms to the replacement

position

#

Switch the ignition on and switch off again

immediately.

Light and visibility 139

#

Installing the wiper blades

Fold the wiper arms back onto the wind‐

shield.

Switch on the ignition.

Press the î button on the combination

switch (/ page 137).

The wiper arms will move into the original

position.

Remove protective film 1 from the mainte‐

nance display on the tip of the newly instal‐

led wiper blades.

#

If the color of the maintenance display changes

from black to yellow, the wiper blades should be

replaced.

% The duration until the color changes varies

depending on the usage conditions.

Maintenance display

Replacing the rear window wiper blade

&

WARNING Risk of becoming trapped if

the windshield wipers are switched on

while wiper blades are being replaced

If the windshield wipers begin to move while

you are changing the wiper blades, you can

be trapped by the wiper arm.

#

Insert the new wiper blade into the wiper

arm in the direction of arrow 1.

#

Always switch off the windshield wipers

#

Slide catch 2 in the direction of arrow 3

until it engages in the locking position.

Make sure that the wiper blade is seated cor‐

rectly.

and the ignition before changing the

wiper blades.

#

Removing the wiper blade

#

Switch the ignition off.

140 Light and visibility

#

Installing the wiper blade

Fold the wiper arm from the replacement

position back onto the rear window.

Mirrors

Operating the outside mirrors

&

WARNING Risk of injury from adjusting

the vehicle settings while the vehicle is in

motion

You could lose control of the vehicle in the

following situations:

R

if you adjust the driver's seat, the head

restraint, the steering wheel or the mirror

while the vehicle is in motion

if you fasten your seat belt while the vehi‐

cle is in motion

#

Fold wiper arm 2 away from the rear win‐

dow until it engages in the replacement posi‐

tion.

Unclip wiper blade 1 from wiper arm 2

and remove it in the direction of arrow 3.

R

#

Position wiper blade 1 with both lugs 3 on

holder 2 on the wiper arm.

#

Before starting the engine: adjust the

#

driver's seat, the head restraint, the

steering wheel or the mirror and fasten

your seat belt.

#

Push wiper blade 1 in the direction of arrow

4 until it engages in holder 2.

Make sure that wiper blade 1 is seated cor‐

rectly.

#

Light and visibility -> Windshield wiper and windshield washer for Your Mercedes GLC Class SUV First Generation (2015-2021)

Related Topics

Light and visibility