2016-2019 Mercedes GLE SUV Lights and windscreen wipers -> Replacing bulbs (vehicles with halogen headlamps) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lights and windscreen wipers -> Replacing bulbs (vehicles with halogen headlamps) for Your Mercedes GLE SUV First Generation (2016-2019)

Replacing bulbs (vehicles with halogen headlamps)123The light clusters are an important aspect ofOverview of bulb replacement - bulbvehicle safety. You must therefore make suretypesthat these function correctly at all times. Havethe headlamp setting checked can replace the following bulbs. The detailsfor the bulb types can be found in the bulbs (vehicles with halo-gen headlamps)Important safety notesG WARNINGBulbs, lamps and plug connectors canbecome very hot during use. When replacing abulb, you could burn yourself on these com-ponents. There is a risk of these components to cool down beforeHalogen headlampsLights and windscreen wipersreplacing the bulb.: Dipped-beam headlamp: H7 55 W; Main-beam headlamp: H7 55 WDo not use a bulb if it has been dropped or if its= Turn signal: W 5 W BVglass tube has been bulb may explode if:R you touch itFitting/removing the cover on theR it is hotfront wheel archR you drop itR you scratch itUse bulbs only in closed lamps that have beendesigned for this purpose. Fit only spare bulbs ofthe same type and the specified on the glass tube reduce the service lifeof the bulbs. Do not touch the glass tube withyour bare hands. If necessary, clean the glasstube when cold with alcohol or spirit and rub itoff with a lint-free bulbs from moisture during not allow bulbs to come into contact must remove the cover from the front wheelReplace only the bulbs listed ( Y page 123).housing before you can change the front the bulbs that you cannot replace yourselfX To remove: switch off the at a qualified specialist workshop.X Turn the front wheel you require assistance replacing bulbs, con-sult a qualified specialist workshop.X Remove securing pin ; using a suitable the new bulb still does not light up, consult aX Slide cover : up and remove specialist workshop.X To fit: insert cove
Replacing bulbs (vehicles with halogen headlamps)
123
The light clusters are an important aspect of
Overview of bulb replacement - bulb
vehicle safety. You must therefore make sure
types
that these function correctly at all times. Have
the headlamp setting checked regularly.
You can replace the following bulbs. The details
for the bulb types can be found in the legend.
Replacing bulbs (vehicles with halo-
gen headlamps)
Important safety notes
G WARNING
Bulbs, lamps and plug connectors can
become very hot during use. When replacing a
bulb, you could burn yourself on these com-
ponents. There is a risk of injury.
Allow these components to cool down before
Halogen headlamps
Lights and windscreen wipers
replacing the bulb.
: Dipped-beam headlamp: H7 55 W
; Main-beam headlamp: H7 55 W
Do not use a bulb if it has been dropped or if its
= Turn signal: W 5 W BV
glass tube has been scratched.
The bulb may explode if:
R you touch it
Fitting/removing the cover on the
R it is hot
front wheel arch
R you drop it
R you scratch it
Use bulbs only in closed lamps that have been
designed for this purpose. Fit only spare bulbs of
the same type and the specified voltage.
Marks on the glass tube reduce the service life
of the bulbs. Do not touch the glass tube with
your bare hands. If necessary, clean the glass
tube when cold with alcohol or spirit and rub it
off with a lint-free cloth.
Protect bulbs from moisture during operation.
Do not allow bulbs to come into contact with
liquids.
You must remove the cover from the front wheel
Replace only the bulbs listed ( Y page 123).
housing before you can change the front bulbs.
Have the bulbs that you cannot replace yourself
X To remove: switch off the lights.
replaced at a qualified specialist workshop.
X Turn the front wheel inwards.
If you require assistance replacing bulbs, con-
sult a qualified specialist workshop.
X Remove securing pin ; using a suitable tool.
If the new bulb still does not light up, consult a
X Slide cover : up and remove it.
qualified specialist workshop.
X To fit: insert cover : again and slide it down
Headlamps and lights are an important aspect of
until it engages.
vehicle safety. You must therefore make sure
X Insert securing pin ;.
that these function correctly at all times. Have
the headlamp setting checked regularly.
Z
Windscreen wipers124X Remove the bulb from bulb holder ;.Dipped-beam headlampsX Insert the new bulb into bulb holder ;.X Simultaneously press bulb holder ; and pulllever = downwards (headlamp on the left-hand side when viewed in the direction oftravel) or upwards (headlamp on the right-hand side when viewed in the direction oftravel).X Press on housing cover : and turn it to signalsX Remove the cover in the front wheel arch( Y page 123).X Turn housing cover : anti-clockwise andremove and windscreen wipersX Turn bulb holder ; anti-clockwise and pullout.X Pull the bulb out of bulb holder ;.X Insert new bulb into bulb holder ;.X Insert bulb holder ; and turn it clockwise.X Press on housing cover : and turn it to theright.X Replace the cover in the front wheel archX Switch off the lights.( Y page 123).X Open the bonnet.X Turn housing cover : anti-clockwise andremove -beam headlampsX Turn bulb holder ; anti-clockwise and pullout.X Pull the bulb out of bulb holder ;.X Insert new bulb into bulb holder ;.X Insert bulb holder ; and turn it clockwise.X Press on housing cover : and turn it to wipersSwitching the windscreen wipers on/offX Switch off the lights.X Open the bonnet.! Do not operate the windscreen wipers whenX Turn housing cover : anti-clockwise andthe windscreen is dry, as this could damageremove wiper blades. Moreover, dust that has col-lected on the windscreen can scratch theX Pull lever = upwards (headlamp on the left-glass if wiping takes place when the wind-hand side when viewed in the direction ofscreen is ) or downwards (headlamp on the right-hand side when viewed in the direction oftravel) and remove bulb holder ;.
Windscreen wipers
124
X Remove the bulb from bulb holder ;.
Dipped-beam headlamps
X Insert the new bulb into bulb holder ;.
X Simultaneously press bulb holder ; and pull
lever = downwards (headlamp on the left-
hand side when viewed in the direction of
travel) or upwards (headlamp on the right-
hand side when viewed in the direction of
travel).
X Press on housing cover : and turn it to the
right.
Turn signals
X Remove the cover in the front wheel arch
( Y page 123).
X Turn housing cover : anti-clockwise and
remove it.
Lights and windscreen wipers
X Turn bulb holder ; anti-clockwise and pull
out.
X Pull the bulb out of bulb holder ;.
X Insert new bulb into bulb holder ;.
X Insert bulb holder ; and turn it clockwise.
X Press on housing cover : and turn it to the
right.
X Replace the cover in the front wheel arch
X Switch off the lights.
( Y page 123).
X Open the bonnet.
X Turn housing cover : anti-clockwise and
remove it.
Main-beam headlamps
X Turn bulb holder ; anti-clockwise and pull
out.
X Pull the bulb out of bulb holder ;.
X Insert new bulb into bulb holder ;.
X Insert bulb holder ; and turn it clockwise.
X Press on housing cover : and turn it to the
right.
Windscreen wipers
Switching the windscreen wipers on/
off
X Switch off the lights.
X Open the bonnet.
! Do not operate the windscreen wipers when
X Turn housing cover : anti-clockwise and
the windscreen is dry, as this could damage
remove it.
the wiper blades. Moreover, dust that has col-
lected on the windscreen can scratch the
X Pull lever = upwards (headlamp on the left-
glass if wiping takes place when the wind-
hand side when viewed in the direction of
screen is dry.
travel) or downwards (headlamp on the right-
hand side when viewed in the direction of
travel) and remove bulb holder ;.

Related Topics

Popular Owner Manuals