2016-2019 Mercedes GLE SUV Seats, steering wheel and mirrors User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seats, steering wheel and mirrors for Your Mercedes GLE SUV First Generation (2016-2019)

Seats104R you have a good overview of traffic conditionsCorrect driver's seat positionR the seat belt is pulled snugly against the bodyand must be routed across the centre of yourG WARNINGshoulder and across your hips in the pelvicYou could lose control of the vehicle whileareadriving if you:Further related subjects:R Electric seat adjustment ( Y page 105)R adjust the driver's seat, steering wheel ormirrorsR Adjusting the steering wheel mechanically( Y page 110) or electrically ( Y page 111).R fasten the seat beltR Fastening the seat belt correctly ( Y page 48).There is a risk of an accident.R Adjusting the rear-view mirror and exteriorAdjust the driver's seat, head restraint, steer-mirrors ( Y page 113).ing wheel and mirrors and fasten your seatR Vehicles with memory function: storing thebelt before starting the , steering wheel, exterior mirror andSeats, steering wheel and mirrorsHead-up Display settings with the memoryfunction ( Y page 115).SeatsImportant safety notesG WARNINGIf children adjust the seats, they couldbecome trapped, especially if they are unat-tended. There is a risk of leaving the vehicle, always take the keywith you and lock the vehicle. Never leavechildren unattended in the seats can be adjusted when there is no keyin the ignition the following when adjusting steeringG WARNINGwheel :, seat belt ; and driver's seat =:When adjusting a seat, you or another vehicleR you are as far away from the driver's airbag aspossibleoccupant could become trapped by the guideR you are sitting in an upright positionrail of the seat, for instance. There is a risk ofinjury.R your thighs are gently supported by the seatcushionMake sure that no one has any part of theirR your legs are not entirely stretched and youbody within the sweep of the seat whencan depress the pedals properlyadjusting it.R the back of your head is supported at eye levelby the centre of the head restraintObserve the safety notes on "Airbags"R you c
Seats
104
R you have a good overview of traffic conditions
Correct driver's seat position
R the seat belt is pulled snugly against the body
and must be routed across the centre of your
G WARNING
shoulder and across your hips in the pelvic
You could lose control of the vehicle while
area
driving if you:
Further related subjects:
R Electric seat adjustment ( Y page 105)
R adjust the driver's seat, steering wheel or
mirrors
R Adjusting the steering wheel mechanically
( Y page 110) or electrically ( Y page 111).
R fasten the seat belt
R Fastening the seat belt correctly ( Y page 48).
There is a risk of an accident.
R Adjusting the rear-view mirror and exterior
Adjust the driver's seat, head restraint, steer-
mirrors ( Y page 113).
ing wheel and mirrors and fasten your seat
R Vehicles with memory function: storing the
belt before starting the engine.
seat, steering wheel, exterior mirror and
Seats, steering wheel and mirrors
Head-up Display settings with the memory
function ( Y page 115).
Seats
Important safety notes
G WARNING
If children adjust the seats, they could
become trapped, especially if they are unat-
tended. There is a risk of injury.
When leaving the vehicle, always take the key
with you and lock the vehicle. Never leave
children unattended in the vehicle.
The seats can be adjusted when there is no key
in the ignition lock.
Observe the following when adjusting steering
G WARNING
wheel :, seat belt ; and driver's seat =:
When adjusting a seat, you or another vehicle
R you are as far away from the driver's airbag as
possible
occupant could become trapped by the guide
R you are sitting in an upright position
rail of the seat, for instance. There is a risk of
injury.
R your thighs are gently supported by the seat
cushion
Make sure that no one has any part of their
R your legs are not entirely stretched and you
body within the sweep of the seat when
can depress the pedals properly
adjusting it.
R the back of your head is supported at eye level
by the centre of the head restraint
Observe the safety notes on "Airbags"
R you can hold the steering wheel with your
( Y page 49) and "Children in the vehicle"
arms slightly bent
( Y page 59).
R you can move your legs freely
R you can see all the displays on the instrument
cluster clearly
Seats105G WARNINGis in an almost vertical position and that theshoulder section of your seatbelt is routedYou could lose control of the vehicle whileacross the centre of your if you:R adjust the driver's seat, steering wheel or! To avoid damage to the seats and the seatmirrorsheating, observe the following information:R fasten the seat beltR do not spill any liquids on the seats. If liquidis spilled on the seats, dry them as soon asThere is a risk of an the driver's seat, head restraint, steer-R if the seat covers are damp or wet, do noting wheel and mirrors and fasten your seatswitch on the seat heating. The seat heat-belt before starting the should also not be used to dry the seats.R clean the seat covers as recommended;G WARNINGsee "Interior care".Seats, steering wheel and mirrorsIf you adjust the seat height carelessly, you orR do not transport heavy loads on the vehicle occupants could be trapped andDo not place sharp objects on the seatcushions, e.g. knives, nails or tools. Thethereby injured. Children in particular couldseats should only be occupied by passen-accidentally press the electrical seat adjust-gers, if buttons and become trapped. There is aR when the seat heating is in operation, dorisk of cover the seats with insulating materi-While moving the seats, make sure that yourals, e.g. blankets, coats, bags, seat covers,hands or other body parts do not get under thechild seats or booster assembly of the seat adjustment sys-! Make sure that there are no objects in under or behind the seats when mov-ing the seats back. There is a risk that theG WARNINGseats and/or the objects could be head restraints cannot provide the inten-i Further related subjects:ded protection unless they are fitted andR Luggage compartment enlargement (fold-adjusted correctly. There is an increased risking down the rear bench seat)of injury to the head an
Seats
105
G WARNING
is in an almost vertical position and that the
shoulder section of your seatbelt is routed
You could lose control of the vehicle while
across the centre of your shoulder.
driving if you:
R adjust the driver's seat, steering wheel or
! To avoid damage to the seats and the seat
mirrors
heating, observe the following information:
R fasten the seat belt
R do not spill any liquids on the seats. If liquid
is spilled on the seats, dry them as soon as
There is a risk of an accident.
possible.
Adjust the driver's seat, head restraint, steer-
R if the seat covers are damp or wet, do not
ing wheel and mirrors and fasten your seat
switch on the seat heating. The seat heat-
belt before starting the engine.
ing should also not be used to dry the seats.
R clean the seat covers as recommended;
G WARNING
see "Interior care".
Seats, steering wheel and mirrors
If you adjust the seat height carelessly, you or
R do not transport heavy loads on the seats.
other vehicle occupants could be trapped and
Do not place sharp objects on the seat
cushions, e.g. knives, nails or tools. The
thereby injured. Children in particular could
seats should only be occupied by passen-
accidentally press the electrical seat adjust-
gers, if possible.
ment buttons and become trapped. There is a
R when the seat heating is in operation, do
risk of injury.
not cover the seats with insulating materi-
While moving the seats, make sure that your
als, e.g. blankets, coats, bags, seat covers,
hands or other body parts do not get under the
child seats or booster seats.
lever assembly of the seat adjustment sys-
! Make sure that there are no objects in the
tem.
footwell under or behind the seats when mov-
ing the seats back. There is a risk that the
G WARNING
seats and/or the objects could be damaged.
The head restraints cannot provide the inten-
i Further related subjects:
ded protection unless they are fitted and
R Luggage compartment enlargement (fold-
adjusted correctly. There is an increased risk
ing down the rear bench seat)
of injury to the head and neck in the event of
( Y page 317)
an accident or sudden braking, for example.
Always drive with the head restraints fitted.
Adjusting the seats electrically
Ensure that the centre of the head restraints
support the back of each vehicle occupant's
head at eye level before driving off.
G WARNING
The seat belt does not offer the intended level
of protection if you have not moved the back-
rest to an almost vertical position. When brak-
ing or in the event of an accident, you could
slide underneath the seat belt and sustain
abdomen or neck injuries, for example. This
poses an increased risk of injury or even fatal
: Head restraint height
injury.
; Seat cushion angle
Adjust the seat properly before beginning
= Seat height
your journey. Always ensure that the backrest
Z
Seats106Adjusting the head restraints manually? Seat fore-and-aft adjustmentA Backrest angleAdjusting the head restraint heighti Vehicles with memory function: if PRE-SAFE ® has been triggered, the front-passenger seat will be moved to a better posi-tion if it was previously in an unfavourableposition.i Vehicles with memory function: when theseat is moved forwards or backwards, theheadrest is moved up or down the head restraintsSeats, steering wheel and mirrorsImportant safety notesX To raise: pull the head restraint up to thedesired position.G WARNINGX To lower: press release catch : in the direc-You could lose control of the vehicle whiletion of the arrow and push the head restraintdriving if you:down to the desired position.R adjust the driver's seat, steering wheel orAdjusting the head restraint fore-and-aftmirrorspositionR fasten the seat beltThere is a risk of an the driver's seat, head restraint, steer-ing wheel and mirrors and fasten your seatbelt before starting the engine.G WARNINGThe head restraints cannot provide the inten-ded protection unless they are fitted andadjusted correctly. There is an increased riskof injury to the head and neck in the event ofThis function allows you to adjust the distancean accident or sudden braking, for the head restraint and the back of theAlways drive with the head restraints that the centre of the head restraintsX To move forwards: pull the head restraintsupport the back of each vehicle occupant'sforwards in the direction of the arrow until ithead at eye level before driving are a number of not interchange the head restraints of theX To move backwards: press and hold releasefront and rear seats. Otherwise, you will not bebutton : and push the head restraint back-able to adjust the height and angle of the to the correct position.X When the head restraint is in the desired posi-Adjust the head restra
Seats
106
Adjusting the head restraints manually
? Seat fore-and-aft adjustment
A Backrest angle
Adjusting the head restraint height
i Vehicles with memory function: if PRE-
SAFE ® has been triggered, the front-
passenger seat will be moved to a better posi-
tion if it was previously in an unfavourable
position.
i Vehicles with memory function: when the
seat is moved forwards or backwards, the
headrest is moved up or down automatically.
Adjusting the head restraints
Seats, steering wheel and mirrors
Important safety notes
X To raise: pull the head restraint up to the
desired position.
G WARNING
X To lower: press release catch : in the direc-
You could lose control of the vehicle while
tion of the arrow and push the head restraint
driving if you:
down to the desired position.
R adjust the driver's seat, steering wheel or
Adjusting the head restraint fore-and-aft
mirrors
position
R fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirrors and fasten your seat
belt before starting the engine.
G WARNING
The head restraints cannot provide the inten-
ded protection unless they are fitted and
adjusted correctly. There is an increased risk
of injury to the head and neck in the event of
This function allows you to adjust the distance
an accident or sudden braking, for example.
between the head restraint and the back of the
Always drive with the head restraints fitted.
head.
Ensure that the centre of the head restraints
X To move forwards: pull the head restraint
support the back of each vehicle occupant's
forwards in the direction of the arrow until it
head at eye level before driving off.
engages.
There are a number of detents.
Do not interchange the head restraints of the
X To move backwards: press and hold release
front and rear seats. Otherwise, you will not be
button : and push the head restraint back-
able to adjust the height and angle of the head
wards.
restraints to the correct position.
X When the head restraint is in the desired posi-
Adjust the head restraint fore-and-aft position
tion, release the button and make sure that
so that it is as close as possible to the back of
the head restraint is engaged in position.
your head.
Observe the important safety guidelines for
i Adjust the head restraint so that the back of
seats ( Y page 104).
your head is as close to the head restraint as
possible.
Seats107Adjusting the head restraints electri-X If the head restraint is fully lowered, it is nec-callyessary to press release catch :.X To raise: pull the head restraint up to theX To adjust the head restraint height: slidedesired switch for the head restraint adjustmentX To lower: press release catch : and push( Y page 105) up or down in the direction of thethe head restraint down until it is in the luxury head restraintsRemoving and fitting the rear seat headrestraintsX To remove: pull the head restraint up to thestop.X Press release catch : and pull the headrestraint out of the , steering wheel and mirrorsX To refit: insert the head restraint so that thenotches on the bar are on the left whenviewed in the direction of travel.X Push the head restraint down until you hear itengage in the rear seat head restraintThe first row of seats has luxury head To adjust the side bolsters: push or pullright-hand and/or left-hand side bolster :into the desired position.X To adjust the fore-and-aft position of thehead restraint: push or pull the headrestraint in the direction of arrow ;.i Adjust the head restraint so that the back ofyour head is as close to the head restraint seat head restraintsAdjusting the rear-seat head restraintYou can only adjust the two outer Using both hands, reach back and grasp thesides of the head restraint.X Pull the lower edge of the head restraint for-wards or back until it is in the desired position.Z
Seats
107
Adjusting the head restraints electri-
X If the head restraint is fully lowered, it is nec-
cally
essary to press release catch :.
X To raise: pull the head restraint up to the
X To adjust the head restraint height: slide
desired height.
the switch for the head restraint adjustment
X To lower: press release catch : and push
( Y page 105) up or down in the direction of the
the head restraint down until it is in the
arrow.
desired position.
Adjusting the luxury head restraints
Removing and fitting the rear seat head
restraints
X To remove: pull the head restraint up to the
stop.
X Press release catch : and pull the head
restraint out of the guides.
Seats, steering wheel and mirrors
X To refit: insert the head restraint so that the
notches on the bar are on the left when
viewed in the direction of travel.
X Push the head restraint down until you hear it
engage in position.
Adjusting the rear seat head restraint
The first row of seats has luxury head restraints.
angle
X To adjust the side bolsters: push or pull
right-hand and/or left-hand side bolster :
into the desired position.
X To adjust the fore-and-aft position of the
head restraint: push or pull the head
restraint in the direction of arrow ;.
i Adjust the head restraint so that the back of
your head is as close to the head restraint as
possible.
Rear seat head restraints
Adjusting the rear-seat head restraint
You can only adjust the two outer head
restraints.
height
X Using both hands, reach back and grasp the
sides of the head restraint.
X Pull the lower edge of the head restraint for-
wards or back until it is in the desired position.
Z
Seats108Adjusting the rear seat backrestsAdjusting the 4-way lumbar support: To raise the backrest contourYou can adjust the angle of the backrests in theSeats, steering wheel and mirrors; To soften the backrest contoursecond row of seats. There are several possibledetent positions.= To lower the backrest contour? To harden the backrest contourX Pull the left or right release lever ; upwardsin the direction of the arrow until the relevantYou can adjust the contour of the front seatbackrest : is fully individually to provide optimum sup-X Pull backrest : forwards in the direction ofport for your arrow and allow it to engage.X To ensure that the backrest has engaged, leanfirmly against backrest :.Adjusting the multicontour seatThe multicontour seat can be adjusted via themultimedia system (see the Digital Owner'sManual).Seat heating and seat ventilationSwitching the seat heating on/offG WARNINGIf you repeatedly switch on seat heating, the seat cushion and backrest padding may become veryhot. The health of vehicle occupants with limited temperature sensitivity or a limited ability toreact to high temperatures may be affected or they may even suffer burn-like injuries. There is arisk of , do not switch on the seat heating repeatedly.
Seats
108
Adjusting the rear seat backrests
Adjusting the 4-way lumbar support
: To raise the backrest contour
You can adjust the angle of the backrests in the
Seats, steering wheel and mirrors
; To soften the backrest contour
second row of seats. There are several possible
detent positions.
= To lower the backrest contour
? To harden the backrest contour
X Pull the left or right release lever ; upwards
in the direction of the arrow until the relevant
You can adjust the contour of the front seat
backrest : is fully released.
backrests individually to provide optimum sup-
X Pull backrest : forwards in the direction of
port for your back.
the arrow and allow it to engage.
X To ensure that the backrest has engaged, lean
firmly against backrest :.
Adjusting the multicontour seat
The multicontour seat can be adjusted via the
multimedia system (see the Digital Owner's
Manual).
Seat heating and seat ventilation
Switching the seat heating on/off
G WARNING
If you repeatedly switch on seat heating, the seat cushion and backrest padding may become very
hot. The health of vehicle occupants with limited temperature sensitivity or a limited ability to
react to high temperatures may be affected or they may even suffer burn-like injuries. There is a
risk of injury.
Therefore, do not switch on the seat heating repeatedly.
Seats109Driver's and front-passenger seatSeats, steering wheel and mirrorsRear seatsThe three red indicator lamps in the button indicate the heating level you have system automatically switches down from level 3 to level 2 after approximately eight system automatically switches down from level 2 to level 1 after approximately ten system automatically switches off approximately 35 minutes after it is set to level 1.X Turn the key to position 1 or 2 in the ignition lock ( Y page 144).X To switch on: press button : repeatedly until the desired heating level is set.X To switch off: press button : repeatedly until all the indicator lamps go out.i If the vehicle battery voltage is too low, the seat heating may switch the seat ventilation on/offThe three blue indicator lamps in the buttons indicate the blower setting you have selected.Z
Seats
109
Driver's and front-passenger seat
Seats, steering wheel and mirrors
Rear seats
The three red indicator lamps in the button indicate the heating level you have selected.
The system automatically switches down from level 3 to level 2 after approximately eight minutes.
The system automatically switches down from level 2 to level 1 after approximately ten minutes.
The system automatically switches off approximately 35 minutes after it is set to level 1.
X Turn the key to position 1 or 2 in the ignition lock ( Y page 144).
X To switch on: press button : repeatedly until the desired heating level is set.
X To switch off: press button : repeatedly until all the indicator lamps go out.
i If the vehicle battery voltage is too low, the seat heating may switch off.
Switching the seat ventilation on/off
The three blue indicator lamps in the buttons indicate the blower setting you have selected.
Z
Steering wheel110X Turn the key to position 1 or 2 in the ignition lock ( Y page 144).X To switch on: press button : repeatedly until the desired blower setting is set.X To switch off: press button : repeatedly until all the indicator lamps go out.i If the vehicle battery voltage is too low, the seat ventilation may switch off.i You can open the side windows and the sliding sunroof using the "Convenience opening"( Y page 97) feature. The seat ventilation of the driver's seat then automatically switches to thehighest with the seat heating or seat ventilationProblemPossible causes/consequences and M SolutionsThe seat heating or seatThe on-board voltage is too low because too many electrical consum-Seats, steering wheel and mirrorsventilation has switcheders are switched prematurely or can-X Switch off electrical consumers that you do not need, such as thenot be switched window heating or interior the battery is sufficiently charged, the seat heating or seatventilation will switch back on wheelAdjusting the steering wheel mechan-icallyImportant safety notesG WARNINGG WARNINGThe steering wheel may move unexpectedly ifYou could lose control of the vehicle whileyou adjust it while driving. This could causedriving if you:you to lose control of the vehicle. There is aR adjust the driver's seat, steering wheel orrisk of an sure that the steering wheel is lockedR fasten the seat beltbefore driving off. Never unlock the steeringwheel when the vehicle is in is a risk of an the driver's seat, head restraint, steer-ing wheel and mirrors and fasten your seatbelt before starting the engine.G WARNINGChildren could become trapped by the steer-ing wheel if they adjust it. There is a risk leaving the vehicle, always take the keywith you and lock the vehicle. Never leavechildren unattended in the vehicle.: Release lever; To adjust the steering wheel heightTh
Steering wheel
110
X Turn the key to position 1 or 2 in the ignition lock ( Y page 144).
X To switch on: press button : repeatedly until the desired blower setting is set.
X To switch off: press button : repeatedly until all the indicator lamps go out.
i If the vehicle battery voltage is too low, the seat ventilation may switch off.
i You can open the side windows and the sliding sunroof using the "Convenience opening"
( Y page 97) feature. The seat ventilation of the driver's seat then automatically switches to the
highest level.
Problems with the seat heating or seat ventilation
Problem
Possible causes/consequences and M Solutions
The seat heating or seat
The on-board voltage is too low because too many electrical consum-
Seats, steering wheel and mirrors
ventilation has switched
ers are switched on.
off prematurely or can-
X Switch off electrical consumers that you do not need, such as the
not be switched on.
rear window heating or interior lighting.
Once the battery is sufficiently charged, the seat heating or seat
ventilation will switch back on automatically.
Steering wheel
Adjusting the steering wheel mechan-
ically
Important safety notes
G WARNING
G WARNING
The steering wheel may move unexpectedly if
You could lose control of the vehicle while
you adjust it while driving. This could cause
driving if you:
you to lose control of the vehicle. There is a
R adjust the driver's seat, steering wheel or
risk of an accident.
mirrors
Make sure that the steering wheel is locked
R fasten the seat belt
before driving off. Never unlock the steering
wheel when the vehicle is in motion.
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirrors and fasten your seat
belt before starting the engine.
G WARNING
Children could become trapped by the steer-
ing wheel if they adjust it. There is a risk of
injury.
When leaving the vehicle, always take the key
with you and lock the vehicle. Never leave
children unattended in the vehicle.
: Release lever
; To adjust the steering wheel height
The electrically adjustable steering wheel can
still be adjusted when there is no key in the igni-
= To adjust the steering wheel position (fore-
tion lock.
and-aft adjustment)
Steering wheel111X Push release lever : down completely.i Further related subjects:The steering column is unlocked.R EASY-ENTRY/EXIT feature ( Y page 111)X Adjust the steering wheel to the desired posi-R Storing settings ( Y page 115)tion.X Push release lever : up as far as it will steering column is wheel heatingX Check if the steering column is locked. Whendoing so, try to push the steering wheel up orSwitching on/offdown or try to move it in the the steering wheel electri-callySeats, steering wheel and mirrorsX Turn the key to position 2 in the ignition lock( Y page 144).X To switch on/off: turn the lever in the direc-tion of arrow : or ;.Indicator lamp = lights up or goes with KEYLESS-GO: when you switch off: To adjust the steering wheel heightthe ignition and open the driver's door, the; To adjust the steering wheel position (fore-steering wheel heating is switched -aft adjustment)Vehicles without KEYLESS-GO: when youThe steering wheel can also be adjusted whenremove the key from the ignition lock, the steer-the key is removed from the ignition wheel heating is switched with the steering wheel heatingProblemPossible causes/consequences and M SolutionsThe steering wheel heat- The on-board voltage is too low because too many electrical consum-ing has switched itselfers are switched prematurely or can- X Switch off electrical consumers that you do not need, such as thenot be switched window heating or interior -ENTRY/EXIT featureoccupants – particularly children – couldbecome trapped. There is a risk of safety notesWhile the EASY-ENTRY/EXIT feature is mak-G WARNINGing adjustments, make sure that no one hasany body parts in the sweep of the steeringWhen the EASY-ENTRY/EXIT feature steering wheel, you and other vehicleZ
Steering wheel
111
X Push release lever : down completely.
i Further related subjects:
The steering column is unlocked.
R EASY-ENTRY/EXIT feature ( Y page 111)
X Adjust the steering wheel to the desired posi-
R Storing settings ( Y page 115)
tion.
X Push release lever : up as far as it will go.
The steering column is locked.
Steering wheel heating
X Check if the steering column is locked. When
doing so, try to push the steering wheel up or
Switching on/off
down or try to move it in the fore-and-aft
direction.
Adjusting the steering wheel electri-
cally
Seats, steering wheel and mirrors
X Turn the key to position 2 in the ignition lock
( Y page 144).
X To switch on/off: turn the lever in the direc-
tion of arrow : or ;.
Indicator lamp = lights up or goes out.
Vehicles with KEYLESS-GO: when you switch off
: To adjust the steering wheel height
the ignition and open the driver's door, the
; To adjust the steering wheel position (fore-
steering wheel heating is switched off.
and-aft adjustment)
Vehicles without KEYLESS-GO: when you
The steering wheel can also be adjusted when
remove the key from the ignition lock, the steer-
the key is removed from the ignition lock.
ing wheel heating is switched off.
Problems with the steering wheel heating
Problem
Possible causes/consequences and M Solutions
The steering wheel heat- The on-board voltage is too low because too many electrical consum-
ing has switched itself
ers are switched on.
off prematurely or can- X Switch off electrical consumers that you do not need, such as the
not be switched on.
rear window heating or interior lighting.
EASY-ENTRY/EXIT feature
occupants – particularly children – could
become trapped. There is a risk of injury.
Important safety notes
While the EASY-ENTRY/EXIT feature is mak-
G WARNING
ing adjustments, make sure that no one has
any body parts in the sweep of the steering
When the EASY-ENTRY/EXIT feature adjusts
wheel.
the steering wheel, you and other vehicle
Z
Mirrors112orMove the steering wheel adjustment lever ifR you press the Start/Stop button once on vehi-there is a risk of entrapment by the steeringcles with KEYLESS-GOwheel. The adjustment process is you close the driver's door with the key inser-ted in the ignition lock, the steering wheel isPress one of the memory function position but-automatically moved to the previously set posi-tons. This function is available only on the memory last position of the steering column is storedG WARNINGwhen you:If children activate the EASY-ENTRY/EXIT fea-R switch the ignition offture, they can become trapped, particularlyR save the setting with the memory functionwhen unattended. There is a risk of injury.( Y page 115).When leaving the vehicle, always take the keyCrash-responsive EASY-EXIT featurewith you and lock the vehicle. Never leaveSeats, steering wheel and mirrorschildren unattended in the the crash-responsive EASY-EXIT feature is trig-gered in an accident, the steering column willG WARNINGmove upwards when the driver's door is occurs irrespective of the position of theIf you drive off while the EASY-ENTRY/EXITkey in the ignition lock. This makes it easier tofeature is making adjustments, you could loseexit the vehicle and rescue the of the vehicle. There is a risk of anThe crash-responsive EASY-EXIT feature is if the EASY-EXIT/ENTRY feature isAlways wait until the adjustment process isactivated in the on-board computercomplete before driving off.( Y page 254).The EASY-ENTRY/EXIT feature makes getting inand out of your vehicle can activate and deactivate the EASY-Rear-view mirrorENTRY/EXIT feature in the on-board computer( Y page 254).Position of the steering wheel when theEASY-ENTRY/EXIT feature is activeThe steering wheel tilts upwards if you:R remove the key from the ignition lockR open the driver's door and KEYLESS-GO is inposition 1.R open the
Mirrors
112
or
Move the steering wheel adjustment lever if
R you press the Start/Stop button once on vehi-
there is a risk of entrapment by the steering
cles with KEYLESS-GO
wheel. The adjustment process is stopped.
If you close the driver's door with the key inser-
ted in the ignition lock, the steering wheel is
Press one of the memory function position but-
automatically moved to the previously set posi-
tons. This function is available only on vehicles
tion.
with the memory function.
The last position of the steering column is stored
G WARNING
when you:
If children activate the EASY-ENTRY/EXIT fea-
R switch the ignition off
ture, they can become trapped, particularly
R save the setting with the memory function
when unattended. There is a risk of injury.
( Y page 115).
When leaving the vehicle, always take the key
Crash-responsive EASY-EXIT feature
with you and lock the vehicle. Never leave
Seats, steering wheel and mirrors
children unattended in the vehicle.
If the crash-responsive EASY-EXIT feature is trig-
gered in an accident, the steering column will
G WARNING
move upwards when the driver's door is opened.
This occurs irrespective of the position of the
If you drive off while the EASY-ENTRY/EXIT
key in the ignition lock. This makes it easier to
feature is making adjustments, you could lose
exit the vehicle and rescue the occupants.
control of the vehicle. There is a risk of an
The crash-responsive EASY-EXIT feature is only
accident.
operational if the EASY-EXIT/ENTRY feature is
Always wait until the adjustment process is
activated in the on-board computer
complete before driving off.
( Y page 254).
The EASY-ENTRY/EXIT feature makes getting in
and out of your vehicle easier.
Mirrors
You can activate and deactivate the EASY-
Rear-view mirror
ENTRY/EXIT feature in the on-board computer
( Y page 254).
Position of the steering wheel when the
EASY-ENTRY/EXIT feature is active
The steering wheel tilts upwards if you:
R remove the key from the ignition lock
R open the driver's door and KEYLESS-GO is in
position 1.
R open the driver's door and the key is in posi-
tion u or 1 in the ignition lock.
i The steering wheel only moves upwards if it
X Anti-dazzle mode: pivot anti-dazzle
has not already reached the upper stop.
switch : forwards or back.
Position of the steering wheel for driv-
ing
The steering wheel is moved to the previously
set position if:
R the driver's door is closed and
R you insert the key into the ignition lock
Mirrors113mirror using button = as long as the indicatorExterior mirrorslamp is the exterior mirrorsX Press button = up, down, or to the right orleft until you have adjusted the exterior mirrorG WARNINGto the correct position. You should have agood overview of traffic could lose control of the vehicle whiledriving if you:The convex exterior mirrors provide a larger fieldof vision.R adjust the driver's seat, steering wheel orThe exterior mirrors are automatically heated ifmirrorsthe rear window heating is switched on and theR fasten the seat beltoutside temperature is is a risk of an the exterior mirrors in/out elec-Adjust the driver's seat, head restraint, steer-tricallying wheel and mirrors and fasten your seatSeats, steering wheel and mirrorsbelt before starting the engine.G WARNINGThe exterior mirrors reduce the size of theimage. Objects visible in the mirrors arecloser than they appear. You could misjudgethe distance from road users driving behindyou when changing lanes, for instance. Thereis a risk of an should therefore always look over yourshoulder to determine the actual distanceX Turn the key to position 1 or 2 in the igni-from road users driving behind lock ( Y page 144).X Briefly press button :.Both exterior mirrors fold in or out.i Make sure that the exterior mirrors arealways folded out fully while driving. Other-wise, they could vibrate.i If you are driving faster than 47 km/h, youcan no longer fold in the exterior the exterior mirrorsIf the battery has been disconnected or com-pletely discharged, the exterior mirrors must beX Turn the key to position 1 or 2 in the igni-reset. The exterior mirrors will otherwise nottion lock ( Y page 144).fold in when you select the "Fold in mirrors whenX Exterior mirror on the driver's side: press but-locking" function in the on-board computerton :.( Y page 255).Exterior mirror on the front-passenger side:X Turn the key to
Mirrors
113
mirror using button = as long as the indicator
Exterior mirrors
lamp is lit.
Adjusting the exterior mirrors
X Press button = up, down, or to the right or
left until you have adjusted the exterior mirror
G WARNING
to the correct position. You should have a
good overview of traffic conditions.
You could lose control of the vehicle while
driving if you:
The convex exterior mirrors provide a larger field
of vision.
R adjust the driver's seat, steering wheel or
The exterior mirrors are automatically heated if
mirrors
the rear window heating is switched on and the
R fasten the seat belt
outside temperature is low.
There is a risk of an accident.
Folding the exterior mirrors in/out elec-
Adjust the driver's seat, head restraint, steer-
trically
ing wheel and mirrors and fasten your seat
Seats, steering wheel and mirrors
belt before starting the engine.
G WARNING
The exterior mirrors reduce the size of the
image. Objects visible in the mirrors are
closer than they appear. You could misjudge
the distance from road users driving behind
you when changing lanes, for instance. There
is a risk of an accident.
You should therefore always look over your
shoulder to determine the actual distance
X Turn the key to position 1 or 2 in the igni-
from road users driving behind you.
tion lock ( Y page 144).
X Briefly press button :.
Both exterior mirrors fold in or out.
i Make sure that the exterior mirrors are
always folded out fully while driving. Other-
wise, they could vibrate.
i If you are driving faster than 47 km/h, you
can no longer fold in the exterior mirrors.
Resetting the exterior mirrors
If the battery has been disconnected or com-
pletely discharged, the exterior mirrors must be
X Turn the key to position 1 or 2 in the igni-
reset. The exterior mirrors will otherwise not
tion lock ( Y page 144).
fold in when you select the "Fold in mirrors when
X Exterior mirror on the driver's side: press but-
locking" function in the on-board computer
ton :.
( Y page 255).
Exterior mirror on the front-passenger side:
X Turn the key to position 1 in the ignition lock
press button ;.
( Y page 144).
The indicator lamp in the corresponding but-
X Briefly press button :.
ton lights up in red.
The indicator lamp goes out again after some
time. You can adjust the selected exterior
Z
Mirrors114Folding the exterior mirrors in/outR If electrolyte comes into contact with yourautomaticallyskin or hair or is swallowed, seek medicalattention the "Fold in mirrors when locking" function isactivated in the on-board computerR Immediately change out of clothing which( Y page 255),has come into contact with electrolyte.R the exterior mirrors fold in automatically asR If an allergic reaction occurs, seek medicalsoon as you lock the vehicle from the outsideattention immediately.R the exterior mirrors fold out again automati-cally as soon as you unlock the vehicle andThe rear-view mirror and the exterior mirror onthen open the driver's or front-passengerthe driver's side automatically go into anti-daz-doorzle mode if the following conditions are metsimultaneously:Exterior mirror pushed out of positionR the ignition is switched on andSeats, steering wheel and mirrorsIf an exterior mirror has been pushed out ofR incident light from headlamps strikes the sen-position (forwards or backwards), proceed assor in the rear-view mirrorfollows:The mirrors do not dip if reverse gear is engagedX Vehicles without electrically folding exte-or if the interior lighting is switched mirrors: manually move the exterior mir-ror into the correct position of the exterior mirrorX Vehicles with electrically folding exteriormirrors: press and hold mirror-folding but-on the front-passenger sideton : until you hear a click and the mirrorSetting and storing the parking positionengages in position mirror housing is engaged again and youYou can set the front-passenger side exteriorcan adjust the exterior mirrors as usualmirror so that you can see the rear wheel on that( Y page 113).side as soon as you engage reverse gear. Youcan store this anti-dazzle mirrorsUsing reverse gearG WARNINGElectrolyte may escape if the glass in an auto-matic anti-dazzle mirror breaks. The electro-lyte is harmful and causes irritation. It must
Mirrors
114
Folding the exterior mirrors in/out
R If electrolyte comes into contact with your
automatically
skin or hair or is swallowed, seek medical
attention immediately.
If the "Fold in mirrors when locking" function is
activated in the on-board computer
R Immediately change out of clothing which
( Y page 255),
has come into contact with electrolyte.
R the exterior mirrors fold in automatically as
R If an allergic reaction occurs, seek medical
soon as you lock the vehicle from the outside
attention immediately.
R the exterior mirrors fold out again automati-
cally as soon as you unlock the vehicle and
The rear-view mirror and the exterior mirror on
then open the driver's or front-passenger
the driver's side automatically go into anti-daz-
door
zle mode if the following conditions are met
simultaneously:
Exterior mirror pushed out of position
R the ignition is switched on and
Seats, steering wheel and mirrors
If an exterior mirror has been pushed out of
R incident light from headlamps strikes the sen-
position (forwards or backwards), proceed as
sor in the rear-view mirror
follows:
The mirrors do not dip if reverse gear is engaged
X Vehicles without electrically folding exte-
or if the interior lighting is switched on.
rior mirrors: manually move the exterior mir-
ror into the correct position.
Parking position of the exterior mirror
X Vehicles with electrically folding exterior
mirrors: press and hold mirror-folding but-
on the front-passenger side
ton : until you hear a click and the mirror
Setting and storing the parking position
engages in position audibly.
The mirror housing is engaged again and you
You can set the front-passenger side exterior
can adjust the exterior mirrors as usual
mirror so that you can see the rear wheel on that
( Y page 113).
side as soon as you engage reverse gear. You
can store this position.
Automatic anti-dazzle mirrors
Using reverse gear
G WARNING
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mirror breaks. The electro-
lyte is harmful and causes irritation. It must
not come into contact with your skin, eyes,
respiratory organs or clothing or be swal-
lowed. There is a risk of injury.
If you come into contact with the electrolyte,
observe the following:
R Rinse off the electrolyte from your skin
immediately with water.
: Button for the exterior mirror on the driver's
side
R Immediately rinse the electrolyte out of
; Button for the exterior mirror on the front-
your eyes thoroughly with clean water.
passenger side
R If the electrolyte is swallowed, immediately
= Adjustment button
rinse your mouth out thoroughly. Do not
? Memory button M
induce vomiting.
Memory function115X Bring the vehicle to a functionX Turn the key to key position 2 in the ignitionStoring settingslock ( Y page 144).X Press button ;.G WARNINGX Engage reverse you use the memory function on the driver'sThe exterior mirror on the front-passengerside moves to the default parking while driving, the adjustments couldcause you to lose control of the vehicle. ThereX Use button = to adjust the exterior mirror toa position that allows you to see the rearis a risk of an and the use the memory function on the driver'sThe parking position is while the vehicle is stationary.i If you shift the transmission to another posi-tion, the exterior mirror on the front-G WARNINGpassenger side returns to the driving the memory function adjusts the seat orSeats, steering wheel and mirrorsUsing the memory buttonsteering wheel, you and other vehicle occu-pants – particularly children – could becomeYou can store the parking position of the exte-trapped. There is a risk of mirror on the front-passenger side usingWhile the memory function is making adjust-memory button M ?. Reverse gear must not bements, make sure that no one has any bodyengaged during the in the sweep of the seat or steeringX Turn the key to key position 2 in the ignitionwheel. If somebody becomes trapped, imme-lock ( Y page 144).diately release the memory function positionX Press button ;.button. The adjustment process is stopped.X Use button = to adjust the exterior mirror toa position that allows you to see the rearG WARNINGwheel and the kerb.X Press memory button M ? and one of theIf children activate the memory function, theyarrows on button = within three become trapped, especially if they areThe parking position is stored if the exteriorunattended. There is a risk of does not leaving the vehicle, always take the keyX If the mirror moves out of positi
Memory function
115
X Bring the vehicle to a standstill.
Memory function
X Turn the key to key position 2 in the ignition
Storing settings
lock ( Y page 144).
X Press button ;.
G WARNING
X Engage reverse gear.
If you use the memory function on the driver's
The exterior mirror on the front-passenger
side moves to the default parking position.
side while driving, the adjustments could
cause you to lose control of the vehicle. There
X Use button = to adjust the exterior mirror to
a position that allows you to see the rear
is a risk of an accident.
wheel and the kerb.
Only use the memory function on the driver's
The parking position is stored.
side while the vehicle is stationary.
i If you shift the transmission to another posi-
tion, the exterior mirror on the front-
G WARNING
passenger side returns to the driving position.
When the memory function adjusts the seat or
Seats, steering wheel and mirrors
Using the memory button
steering wheel, you and other vehicle occu-
pants – particularly children – could become
You can store the parking position of the exte-
trapped. There is a risk of injury.
rior mirror on the front-passenger side using
While the memory function is making adjust-
memory button M ?. Reverse gear must not be
ments, make sure that no one has any body
engaged during the process.
parts in the sweep of the seat or steering
X Turn the key to key position 2 in the ignition
wheel. If somebody becomes trapped, imme-
lock ( Y page 144).
diately release the memory function position
X Press button ;.
button. The adjustment process is stopped.
X Use button = to adjust the exterior mirror to
a position that allows you to see the rear
G WARNING
wheel and the kerb.
X Press memory button M ? and one of the
If children activate the memory function, they
arrows on button = within three seconds.
could become trapped, especially if they are
The parking position is stored if the exterior
unattended. There is a risk of injury.
mirror does not move.
When leaving the vehicle, always take the key
X If the mirror moves out of position, repeat the
with you and lock the vehicle. Never leave
steps.
children unattended in the vehicle.
Calling up a stored parking position
The memory function can be used at any time,
e.g. even when the key is not in the ignition lock.
X Turn the key to key position 2 in the ignition
lock ( Y page 144).
With the memory function, you can store up to
three different settings, e.g. for three different
X Adjust the exterior mirror on the front-
people.
passenger side using button ;.
The following settings are stored as a single
X Engage reverse gear.
memory preset:
The exterior mirror on the front-passenger
side moves to the stored parking position.
R position of the seat, backrest and head
restraint
The exterior mirror on the front-passenger side
moves back to its original position:
R driver's side: steering wheel position
R driver's side: position of the exterior mirrors
R as soon as you exceed a speed of 15 km/h
on the driver's and front-passenger sides
R if you press button : for the exterior mirror
on the driver's side
Z
Memory function116X Adjust the seat ( Y page 105).X On the driver's side, adjust the steering wheel( Y page 111) and the exterior mirrorsSeats, steering wheel and mirrors( Y page 113).X Press memory button M and then press mem-ory position button 1, 2 or 3 within three settings are stored in the selected mem-ory position. A tone sounds when the settingshave been memory function can still be used if the keyhas been up a stored settingX Press and hold the relevant storage positionbutton 1, 2 or 3 until the seat, steering wheeland exterior mirrors are in the stored setting procedure is interrupted as soon asyou release the buttons for the storage position.
Memory function
116
X Adjust the seat ( Y page 105).
X On the driver's side, adjust the steering wheel
( Y page 111) and the exterior mirrors
Seats, steering wheel and mirrors
( Y page 113).
X Press memory button M and then press mem-
ory position button 1, 2 or 3 within three sec-
onds.
The settings are stored in the selected mem-
ory position. A tone sounds when the settings
have been completed.
The memory function can still be used if the key
has been removed.
Calling up a stored setting
X Press and hold the relevant storage position
button 1, 2 or 3 until the seat, steering wheel
and exterior mirrors are in the stored position.
The setting procedure is interrupted as soon as
you release the buttons for the storage position.

Related Topics

Popular Owner Manuals