Engaging the outside mirrors
1
Selects the driver's outside mirror.
2
Folds the outside mirrors in/out.
3
Selects the front-passenger outside mirror.
4
Adjusts the outside mirrors.
If an outside mirror has been forcibly disengaged,
proceed as follows.
#
Press and hold button 2.
You will hear a click and the mirror will audibly
click into place. The outside mirror will now be
set to the correct position.
Automatic anti-dazzle mirrors function
&
WARNING Risk of acid burns and poison-
ing due to the anti-dazzle mirror electro-
lyte
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mirror breaks.
The electrolyte is hazardous to health and cau-
ses irritation. It must not come into contact
with your skin, eyes, respiratory organs or
clothing or be swallowed.
#
If you come into contact with electrolyte,
observe the following:
R
Immediately rinse the electrolyte
from your skin with water and seek
medical attention.
R
If electrolyte comes into contact with
your eyes, immediately rinse them
thoroughly with clean water and seek
medical attention.
R
If the electrolyte is swallowed, imme-
diately rinse your mouth out thor-
oughly. Do not induce vomiting. Seek
medical attention immediately.
R
Immediately change out of clothing
which has been contaminated with
electrolyte.
R
If an allergic reaction occurs, seek
medical attention immediately.
When light from a headlamp hits the sensor on
the inside rearview mirror, the inside rearview mir-
ror automatically dims.
System limits
The system will not go into anti-dazzle mode if:
R
The vehicle is switched o.
R
Reverse gear is engaged.
R
The interior lighting is switched on.
250
Light and sight
F167 0057 02
English 
