Rectifying problems with the sliding sunroof
&
WARNING Risk of becoming trapped or
fatal injuries when the sliding sunroof is
closed again
If the sliding sunroof is closed again immedi-
ately aer it has been blocked or reset, it will
close with increased force.
#
Make sure that no parts of the body are
in the closing area.
#
Release the button immediately if some-
body becomes trapped.
or
#
Briey press the button in any direction
during the automatic closing process.
The closing process will be stopped.
The sliding sunroof cannot be closed and you can-
not see the cause.
%
The term "sliding sunroof" also refers to the
panorama sliding sunroof.
If the sliding sunroof is obstructed during closing
and reopens again slightly:
#
Immediately aer automatic reversing, pull
and hold the 3 button down again to the
point of resistance until the sliding sunroof is
closed.
The sliding sunroof will be closed with
increased force.
If the sliding sunroof is obstructed again and
opens again slightly:
#
Repeat the previous step.
The sliding sunroof will be closed again with
increased force.
Vehicles with a panorama sliding sunroof: the slid-
ing sunroof or the roller sunblind is not operating
smoothly.
#
Reset the sliding sunroof and the roller sun-
blind.
Resetting the sliding sunroof and the roller sun-
blind
#
Pull and hold the 3 button little by little
until the sliding sunroof is fully closed.
#
Pull and hold the 3 button little by little
until the roller sunblind is fully closed.
#
Use automatic operation to fully open and
then close the sliding sunroof.
Roller sunblinds
Extending or retracting the roller sunblinds on the
rear side windows
&
WARNING Risk of becoming trapped when
extending or retracting the roller sunblind
Body parts could become trapped in the
sweep of the roller sunblind when it is being
extended or retracted.
#
Make sure that no body parts are in the
sweep of the roller sunblind when it is
being extended or retracted.
#
If someone becomes trapped, briey
press the button in the opposite direc-
tion.
The opening or closing process will
briey be stopped. The roller sunblind
will then return to its starting position.
174
Opening and closing
F167 0057 02
English 
