Get Seats and stowing -> Seats Guide for Mercedes GLE SUV Fourth Generation (2020-2026)

be damaged or come loose from its anchor-

age. This may result in injuries.

Use the grab handles only to stabilise

the seating position or to assist in get-

ting in and out of the seat.

Seats

Adjusting the front seat

WARNING Risk of becoming trapped if the

seats are adjusted by children

Children could become trapped if they adjust

the seats, particularly when unattended.

When leaving the vehicle, always take the

key with you and lock the vehicle.

Never leave children unattended in the

vehicle.

You can adjust the seats when the vehicle is

switched o.

WARNING Risk of becoming trapped dur-

ing seat adjustment

When you adjust a seat, you or other vehicle

occupants could become trapped, e.g. on the

seat guide rail.

Make sure when adjusting a seat that no

one has any body parts in the sweep of

the seat.

Observe the safety notes on "Airbags" and "Chil-

dren in the vehicle".

WARNING Risk of accident due to adjust-

ing the vehicle settings while the vehicle is

in motion

You could lose control of the vehicle in the fol-

lowing situations in particular:

if you adjust the driver's seat, the head

restraint, the steering wheel or the mirror

while the vehicle is in motion

if you fasten your seat belt while the vehi-

cle is in motion

Before starting the vehicle: in particular,

adjust the driver's seat, head restraint,

steering wheel and mirror, and fasten

your seat belt.

WARNING Risk of becoming trapped if the

seat height is adjusted carelessly

If you adjust the seat height carelessly, you or

other vehicle occupants could be trapped and

thereby injured.

Children in particular could accidentally press

the electrical seat adjustment buttons and

become trapped.

While moving the seats, make sure that

hands or other body parts do not get

under the lever assembly of the seat

adjustment system.

Seats and stowing

179

F167 0057 02

WARNING Risk of injury due to head

restraints not being tted or being adjus-

ted incorrectly

If head restraints have not been installed or

have not been adjusted correctly, there is an

increased risk of injury in the head and neck

area, e.g. in the event of an accident or when

braking.

Always drive with the head restraints t-

ted.

Before driving o, make sure for every

vehicle occupant that the centre of the

head restraint supports the back of the

head at about eye level.

Do not interchange the head restraints of the

front and rear seats. Otherwise, you will not be

able to adjust the height and angle of the head

restraints correctly.

Adjust the head restraint fore-and-a position so

that it is as close as possible to the back of your

head.

WARNING Risk of injury or death due to

incorrect seat position

The seat belt will not oer the intended level

of protection if you have not moved the seat

backrest to an almost vertical position.

In particular, you may slip under the seatbelt

and injure yourself.

Adjust the seat properly before begin-

ning your journey.

Always ensure that the seat backrest is

in an almost vertical position and that

the shoulder section of your seat belt is

routed across the centre of your shoul-

der.

WARNING Risk of injury due to excessive

load on the grab handles

If you apply your full body weight to the grab

handle or pull it abruptly, the grab handle may

be damaged or come loose from its anchor-

age. This may result in injuries.

Use the grab handles only to stabilise

the seating position or to assist in get-

ting in and out of the seat.

WARNING Risk of potentially fatal injuries

due to objects trapped under the front

passenger seat

Objects trapped under the front passenger

seat may interfere with the function of the

automatic front passenger airbag shuto or

damage the system.

Do not stow any objects under the front

passenger seat.

When the front passenger seat is occu-

pied, ensure that no objects have

become trapped beneath the front

passenger seat.

NOTE Damage to the seats when adjust-

ing

The seats may be damaged by objects when

adjusting the seats.

180

Seats and stowing

F167 0057 02

When adjusting the seats, make sure

that there are no objects in the footwell,

under or behind the seats.

Head restraint height

Seat backrest inclination

Seat height

Seat cushion length

Seat cushion inclination

Seat fore-and-a position

Save the settings with the memory function

(/ page 201).

Adjusting the front passenger seat electrically

from the driver's seat

WARNING Risk of becoming trapped if the

seats are adjusted by children

Children could become trapped if they adjust

the seats, particularly when unattended.

When leaving the vehicle, always take the

key with you and lock the vehicle.

Never leave children unattended in the

vehicle.

You can adjust the seats when the ignition is

switched o.

WARNING Risk of becoming trapped dur-

ing seat adjustment

When you adjust a seat, you or other vehicle

occupants could become trapped, e.g. on the

seat guide rail.

Make sure when adjusting a seat that no

one has any body parts in the sweep of

the seat.

Observe the safety notes on "Airbags" and "Chil-

dren in the vehicle".

WARNING Risk of injury or death due to

the front seat being positioned too close

to the cockpit

The front airbags can also injure the occu-

pants in the front of the vehicle.

Always adjust the front seats so they are

as far away as possible from the front

airbags.

In addition, observe the notes on correct

seat adjustment.

Seats and stowing

181

F167 0057 02

NOTE Damaging objects in the luggage

net in the front passenger footwell when

adjusting the front passenger seat

Objects in the luggage net in the front

passenger footwell can become damaged

when the front passenger seat is being adjus-

ted.

Do not slide the front passenger seat as

far forward as it will go.

NOTE Damage to the seats when moving

the seats back

The seats may be damaged by objects when

moving the seats back.

When moving the seats back, make sure

that there are no objects in the footwell,

under or behind the seats.

Requirements:

The power supply is switched on.

You can call up the following functions for the

front passenger seat:

Seat adjustment

Seat heating

Seat ventilation

Memory function

To select the front passenger seat: press but-

ton 1.

When the indicator lamp lights up, the front

passenger seat is selected.

Adjust the front passenger seat using the but-

tons on the driver's side door operating unit.

To select the driver's seat: press button 1

again.

When the indicator lamp goes out, the driver's

seat has been selected.

182

Seats and stowing

F167 0057 02

Adjusting the 4-way lumbar support

Higher

Soer

Lower

Firmer

Use buttons 1 to 4 to adjust the contour of

the backrest.

Adjusting the rear seats electrically

WARNING Risk of becoming trapped if the

seats are adjusted by children

Children could become trapped if they adjust

the seats, particularly when unattended.

When leaving the vehicle, always take the

key with you and lock the vehicle.

Never leave children unattended in the

vehicle.

You can adjust the seats when the vehicle is

switched o.

WARNING Risk of becoming trapped dur-

ing seat adjustment

When you adjust a seat, you or other vehicle

occupants could become trapped, e.g. on the

seat guide rail.

Make sure when adjusting a seat that no

one has any body parts in the sweep of

the seat.

WARNING Risk of becoming trapped if the

seat height is adjusted carelessly

If you adjust the seat height carelessly, you or

other vehicle occupants could be trapped and

thereby injured.

Children in particular could accidentally press

the electrical seat adjustment buttons and

become trapped.

While moving the seats, make sure that

hands or other body parts do not get

under the lever assembly of the seat

adjustment system.

WARNING Risk of injury due to head

restraints not being tted or being adjus-

ted incorrectly

If head restraints have not been installed or

have not been adjusted correctly, there is an

increased risk of injury in the head and neck

area, e.g. in the event of an accident or when

braking.

Seats and stowing

183

F167 0057 02

Always drive with the head restraints t-

ted.

Before driving o, make sure for every

vehicle occupant that the centre of the

head restraint supports the back of the

head at about eye level.

Do not interchange the head restraints of the

front and rear seats. Otherwise, you will not be

able to adjust the height and angle of the head

restraints correctly.

Adjust the head restraint fore-and-a position so

that it is as close as possible to the back of your

head.

WARNING Risk of injury or death due to

incorrect seat position

The seat belt will not oer the intended level

of protection if you have not moved the seat

backrest to an almost vertical position.

In particular, you may slip under the seatbelt

and injure yourself.

Adjust the seat properly before begin-

ning your journey.

Always ensure that the seat backrest is

in an almost vertical position and that

the shoulder section of your seat belt is

routed across the centre of your shoul-

der.

WARNING Risk of injury due to excessive

load on the grab handles

If you apply your full body weight to the grab

handle or pull it abruptly, the grab handle may

be damaged or come loose from its anchor-

age. This may result in injuries.

Use the grab handles only to stabilise

the seating position or to assist in get-

ting in and out of the seat.

NOTE Damage to the rear seat armrest

when folding the centre seat backrest

forward

If the rear seat armrest is folded down, it can

be damaged when the centre seat backrest is

folded forward.

Fold the rear seat armrest upwards

before folding the centre seat backrest

forward.

The middle seat backrest is adjusted together

with the le seat.

184

Seats and stowing

F167 0057 02

Head restraint height

Seat backrest inclination

Seat fore-and-a position

Folding the rear seats forwards electrically (vehi-

cles with a third row of seats)

WARNING Risk of becoming trapped when

folding the seats forwards

When you fold a seat forwards, you or a vehi-

cle occupant could become trapped.

Make sure that no part of the body is

within the seat's range of motion when

folding a seat forward.

WARNING Risk of injury due to excessive

load on the grab handles

If you apply your full body weight to the grab

handle or pull it abruptly, the grab handle may

be damaged or come loose from its anchor-

age. This may result in injuries.

Use the grab handles only to stabilise

the seating position or to assist in get-

ting in and out of the seat.

WARNING Risk of an accident because

the seat backrest is not engaged

The seat backrest may fold forwards.

There is a risk of the following, in particular:

The vehicle occupant may be pressed

against the seat belt. The seat belt cannot

protect as intended and could cause addi-

tional injury.

A child restraint system will no longer be

properly supported or positioned and will

no longer full its function as intended.

The seat backrest will not be able restrain

objects or goods in the load compartment.

Always ensure that the seat backrest is

engaged, especially:

Before persons travel in the vehicle while

sitting on a seat with the easy entry and

exit feature

Aer the seat backrest has been adjusted

Seats and stowing

185

F167 0057 02

Aer the easy entry and exit feature has

been used

Aer the load compartment enlargement

has been folded forwards

WARNING Risk of injury due to seat

backrests folded forwards

If the seat backrest of the rear seat is folded

forwards, persons in the third row of seats

may hit parts of the seat mechanism, espe-

cially in the event of an accident, braking

manoeuvre or abrupt change of direction.

If there is a person in the third row of

seats, the rear seat in front of them must

be folded back to the driving position

before the journey begins.

Persons in the third row of seats should

not rest their legs on a seat backrest

that has been folded forwards.

Always ensure that all vehicle occupants have

their seat belts fastened correctly and are sitting

properly. Particular attention must be paid to chil-

dren.

If you no longer require the seat backrest to be

folded down for loading or for getting in and out,

fold it back into place.

WARNING Risk of becoming trapped if the

seat is not engaged

The seat does not engage when folded for-

wards. The seat can fold backwards unexpect-

edly, e.g. when accelerating, braking or in the

event of an abrupt change of direction or an

accident.

People in the seat's sweep can become trap-

ped.

If a seat is folded forwards, always fold it

back before driving o.

Make sure that the seat is engaged.

WARNING Risk of injury due to excessive

load on the grab handles

If you apply your full body weight to the grab

handle or pull it abruptly, the grab handle may

be damaged or come loose from its anchor-

age. This may result in injuries.

Use the grab handles only to stabilise

the seating position or to assist in get-

ting in and out of the seat.

To get in and out, you can fold the seats on the

second row of seats forwards in vehicles with a

third row of seats. In this case, the centre seat

folds forwards and backwards together with the

le-hand seat in vehicles with a centre seat back-

rest.

Requirements

The area into which the seat is folded is clear.

The seat has been folded up (/ page 42).

Vehicles with comfort seating: the centre arm-

rest is folded up.

186

Seats and stowing

F167 0057 02

Vehicles with an extended centre console: the

stowage compartment in the centre console is

closed.

Vehicles with a centre seat backrest: the

centre seat backrest is in an upright position

(/ page 40).

To fold the seat into the front position: briey

pull on button 1.

The head restraint will move downwards. The

seat backrest will move into the front position.

The seat fore-and-a adjustment will move for-

wards until the seat is unlocked. The seat will

then tip forwards.

To fold the seat back: press and hold button

1 until the rear seat engages audibly.

The seat will tilt downwards and stop in the

front position. The seat backrest will remain in

the cargo position.

To interrupt the folding process, release but-

ton 1. To continue the folding procedure,

press and hold button

1 again.

If a seat on the second row of seats is not

engaged, this will be shown on the multifunction

display on the instrument cluster.

Set the seat backrest inclination and seat

fore-and-a adjustment using the buttons on

the door control panel.

To increase the size of the luggage compart-

ment, you can move the seat backrests into

the luggage compartment oor position

(/ page 40).

Folding the rear seats forwards mechanically

(emergency release)

The release loops are located on the outer sides

and rear sides of the seats on the second row of

seats.

Side release loops

Seats and stowing

187

F167 0057 02

Release loops on the rear sides

Pull one of release loops 1.

Fold the seat backrest forwards.

Before commencing your journey, make sure

that the seat backrest and the rear bench seat

are engaged.

Head restraints

▌Adjusting the front seat head restraints man-

ually

WARNING Risk of accident due to adjust-

ing the vehicle settings while the vehicle is

in motion

You could lose control of the vehicle in the fol-

lowing situations in particular:

If you adjust the driver's seat, the head

restraint, the steering wheel or the mirror

while the vehicle is in motion.

If you fasten your seat belt while the vehi-

cle is in motion

Before starting the vehicle: in particular,

adjust the driver's seat, the head

restraint, the steering wheel and the mir-

ror and fasten your seat belt.

WARNING Risk of injury due to head

restraints not being tted or being adjus-

ted incorrectly

If head restraints have not been installed or

have not been adjusted correctly, there is an

increased risk of injury in the head and neck

area, e.g. in the event of an accident or when

braking.

Always drive with the head restraints t-

ted.

Before driving o, make sure for every

vehicle occupant that the centre of the

head restraint supports the back of the

head at about eye level.

Do not interchange the head restraints of the

front and rear seats. Otherwise, you will not be

able to adjust the height and angle of the head

restraints correctly.

Adjust the head restraint fore-and-a position so

that it is as close as possible to the back of your

head.

188

Seats and stowing

F167 0057 02

To raise: pull the head restraint up.

To lower: press release knob 1 in the direc-

tion of the arrow and push the head restraint

down.

To move forward: press release knob 2 and

pull the head restraint forward.

To move backwards: press release knob 2

and push the head restraint backwards.

▌Adjusting the front seat luxury head restraints

manually

WARNING Risk of accident due to adjust-

ing the vehicle settings while the vehicle is

in motion

You could lose control of the vehicle in the fol-

lowing situations in particular:

If you adjust the driver's seat, the head

restraint, the steering wheel or the mirror

while the vehicle is in motion.

If you fasten your seat belt while the vehi-

cle is in motion

Before starting the vehicle: in particular,

adjust the driver's seat, the head

restraint, the steering wheel and the mir-

ror and fasten your seat belt.

WARNING Risk of injury due to incorrectly

adjusted head restraints

If head restraints have not been adjusted cor-

rectly, there is an increased risk of injury in

the head and neck area, e.g. in the event of an

accident or sudden braking.

Before driving o, make sure for every

vehicle occupant that the centre of the

head restraint supports the back of the

head at about eye level.

Adjust the head restraint fore-and-a position so

that it is as close as possible to the back of your

head.

To move forward: press release knob 1 and

pull the head restraint forward.

To move backwards: press release knob 1

and push the head restraint backwards.

Seats and stowing

189

F167 0057 02

▌Adjusting the head restraints of the rear seats

manually

WARNING Risk of injury due to head

restraints not being tted or being adjus-

ted incorrectly

If head restraints have not been installed or

have not been adjusted correctly, there is an

increased risk of injury in the head and neck

area, e.g. in the event of an accident or when

braking.

Always drive with the head restraints t-

ted.

Before driving o, make sure for every

vehicle occupant that the centre of the

head restraint supports the back of the

head at about eye level.

Do not interchange the head restraints of the

front and rear seats. Otherwise, you will not be

able to adjust the height and angle of the head

restraints correctly.

Depending on the vehicle equipment, you can

adjust the head restraints in the rear.

To raise: pull the head restraint up.

To lower: press release knob 1 in the direc-

tion of the arrow and push the head restraint

down.

Vehicles with a third row of seats

The head restraints on the third row of seats have

a usage position and a non-usage position. The

usage position is the extended, top position in

which the head restraint engages; the non-usage

position is the bottom, retracted position of the

head restraint. If the seats on the third row of

seats are being used, the head restraint must be

in the top, engaged usage position.

If the third row of seats is occupied: move the

head restraints to the very top and have them

engage there.

If the third row of seats is not occupied: move

the head restraints to the very bottom.

▌Fitting/removing the rear seat head restraints

WARNING Risk of injury due to head

restraints not being tted or being adjus-

ted incorrectly

If head restraints have not been installed or

have not been adjusted correctly, there is an

increased risk of injury in the head and neck

area, e.g. in the event of an accident or when

braking.

Always drive with the head restraints t-

ted.

Before driving o, make sure for every

vehicle occupant that the centre of the

190

Seats and stowing

F167 0057 02

head restraint supports the back of the

head at about eye level.

Do not interchange the head restraints of the

front and rear seats. Otherwise, you will not be

able to adjust the height and angle of the head

restraints correctly.

Removing

Depending on the vehicle equipment, you can

remove the head restraints in the rear.

Release the rear seat backrest and fold it for-

wards slightly (/ page 40).

Pull the head restraint upwards as far as it will

go.

Push release knob 1 in the direction of the

arrow and pull out the head restraint.

Installing

Insert the head restraint such that the notches

on the bar are on the le when viewed in the

direction of travel.

Push the head restraint down until it engages.

Fold the rear seat backrest back until it

engages.

Seats and stowing

191

F167 0057 02

▌Adjusting the luxury head restraints of the rear

seats mechanically

WARNING Risk of injury due to incorrectly

adjusted head restraints

If head restraints have not been adjusted cor-

rectly, there is an increased risk of injury in

the head and neck area, e.g. in the event of an

accident or sudden braking.

Before driving o, make sure for every

vehicle occupant that the centre of the

head restraint supports the back of the

head at about eye level.

Do not interchange the head restraints of the

front and rear seats. Otherwise, you will not be

able to adjust the height and angle of the head

restraints correctly.

Adjust the head restraint fore-and-a position so

that it is as close as possible to the back of your

head.

Head restraint of the standard vehicle (example)

To adjust the side bolsters of the head

restraint: pull or push right or le side bolster

To adjust the angle of the head restraint: pull

or push the head restraint in the direction of

arrow

Conguring the seat settings

Multimedia system:

Comfort

Seat

Adjusting the air cushions

On the corresponding menu, adjust the air

cushions for Lumbar or Side bolsters.

Setting the seat heating balance

Select Heating settings.

Select Seat heating balance.

Adjust the heat distribution for the desired

seat.

Setting automatic seat adjustment

WARNING Risk of becoming trapped dur-

ing adjustment of the driver's seat aer

calling up a driver prole

Selecting a user prole may trigger an adjust-

ment of the driver's seat to the position saved

under the user prole. You or other vehicle

occupants could be injured in the process.

192

Seats and stowing

F167 0057 02

Make sure that when the position of driv-

er's seat is being adjusted using the mul-

timedia system, no people or body parts

are in the seat's range of movement.

If there is a risk of someone becoming trap-

ped, immediately stop the adjustment process

by:

a) Pressing the warning message on the

central display.

b) Pressing a position button of the

memory function or a seat adjustment

switch in the driver's door.

The adjustment process is stopped.

Multimedia system:

Comfort

Seat

Position seat automatically

Manually adjusting driver's seat and steering

wheel position to body size

The vehicle calculates a suitable driver's seat and

steering wheel position on the basis of the driver's

body size and sets this directly.

To set the unit of measurement: select cm or

ft/in.

Set the size using the scale.

Select Start positioning.

The driver's seat and steering wheel position

is adjusted to the body size that has been set.

You can also congure these settings via the

Mercedes me user account for your user pro-

le. By synchronising the proles in the vehi-

cle and the Mercedes me connect proles,

you can carry over these settings for your

vehicle.

Further information about synchronising user

proles (/ page 500).

If the driver's seat and steering wheel position

calculated by the vehicle is not practical or

comfortable, it can be manually adapted at

any time via the control buttons.

The outside mirrors are not set via this func-

tion. Instead, they have to be set manually via

the operating switches.

Overview of massage programmes

Hot Relaxing back Combination of heat and

relaxation. It starts by massaging the back. In

addition, you will start to notice warm pres-

sure points, beginning in the pelvic area.

Hot Relaxing shoulder Combination of heat

and relaxation. It starts by massaging the

shoulders. In addition, you will start to notice

warm pressure points, beginning in the pelvic

area.

Activating Massage Activating massage with

upward-moving massage waves.

Classic Massage Relaxing back massage.

Wave Massage Regenerating massage pro-

gramme via relaxing waves across the back

and in the seat cushion.

Mobilizing Massage Mobilising massage with

upward-moving massage waves. Can promote

deeper respiration and hence improve circula-

tion and blood pressure.

Active Workout backrest and Active Workout

cushion

These programmes require your

cooperation. Alternating between tensing and

Seats and stowing

193

F167 0057 02

releasing helps to improve blood ow to your

muscles. Press against a pressure point as

soon as you feel it.

Selecting the massage programme for the front

seats

Multimedia system:

Comfort

Select Massage.

Select a massage programme (/ page 193).

Start the programme for the desired

seat ;.

To set the massage intensity: switch High

intensity

on or o.

To stop the massage: select É.

The availability of this function is equipment-

dependent.

Resetting seat settings

Multimedia system:

Comfort

Seat

Select Reset.

Select ß for the desired seat.

The settings for the selected seat are reset.

Switching the seat heating on/o

WARNING Risk of burns due to repeatedly

switching on the seat heating

Repeatedly switching on the seat heating can

cause the seat cushion and seat backrest pad-

ding to become very hot.

In particular, the health of persons with limited

temperature sensitivity or a limited ability to

react to high temperatures may be aected or

they may even suer burn-like injuries.

Do not repeatedly switch on the seat

heating.

To protect against overheating, the seat heating

may be temporarily deactivated aer it has been

switched on repeatedly.

NOTE Damage to the seats caused by

objects or documents when the seat

heater is switched on

When the seat heater is switched on, over-

heating may occur due to objects or docu-

ments placed on the seats e.g. seat cushions

or child seats. This could cause damage to the

seat surface.

Make sure that no objects or documents

are on the seats when the seat heater is

switched on.

Requirements

The power supply is switched on.

194

Seats and stowing

F167 0057 02

Seat heating in the cockpit Seat heating in the rear

Press button 1 repeatedly until the desired

heating level is set.

Depending on the heating level, up to three

indicator lamps will light up. If all indicator

lamps are o, the seat heating is switched o.

The seat heating will automatically switch

down from the three heating levels aer 8, 10

and 20 minutes until the seat heating is

switched o.

Switching the seat ventilation on/o

Requirements:

The power supply is switched on.

Seat ventilation in the cockpit

Seats and stowing

195

F167 0057 02

Press button 1 repeatedly until the desired

ventilation level is set.

Depending on the ventilation level, up to three

indicator lamps will light up. If all indicator

lamps are o, the seat ventilation is switched

o.

Steering wheel

Adjusting the steering wheel manually

WARNING Risk of accident due to adjust-

ing the vehicle settings while the vehicle is

in motion

You could lose control of the vehicle in the fol-

lowing situations in particular:

if you adjust the driver's seat, the head

restraint, the steering wheel or the mirror

while the vehicle is in motion

if you fasten your seat belt while the vehi-

cle is in motion

Before starting the vehicle: in particular,

adjust the driver's seat, head restraint,

steering wheel and mirror, and fasten

your seat belt.

WARNING Risk of entrapment for children

when adjusting the steering wheel

Children could injure themselves if they adjust

the steering wheel.

Never leave children unattended in the

vehicle.

When leaving the vehicle, always take the

key with you and lock the vehicle.

Unlocking

Fold release lever 1 down as far as it will go.

Adjust height 2 and distance 3 to the

steering wheel.

196

Seats and stowing

F167 0057 02

Seats and stowing -> Seats for Your Mercedes GLE SUV Fourth Generation (2020-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals