Get Technical data -> Operating fluids Guide for Mercedes GLE SUV Fourth Generation (2020-2026)

Maximum permissible front axle load (kg)

Maximum permissible rear axle load (kg)

Paint code

The data shown in the illustration is shown as

an example.

VIN in front of the front seat

VIN (vehicle identication number)

VIN at the lower edge of the windscreen

VIN (vehicle identication number)

The VIN as a label at the lower edge of the wind-

screen is only available in some countries.

Engine number

The engine number is stamped into the crank-

case.

Further information can be obtained at a

qualied specialist workshop.

Operating uids

Notes on operating uids

WARNING Risk of injury due to harmful

operating uids

Operating uids can be toxic.

When using, storing and disposing of

operating uids, observe the imprints on

the respective original containers.

Always keep operating uids in the

sealed original container.

Always keep children away from operat-

ing uids.

ENVIRONMENTAL NOTE Pollution of the

environment due to irresponsible disposal

of operating uids

Incorrect disposal of operating uids can

cause considerable damage to the environ-

ment.

Dispose of operating uids in an environ-

mentally responsible manner.

Technical data

827

F167 0057 02

Operating uids include the following:

fuels

DeNOx agent AdBlue

for exhaust gas aer-

treatment

lubricants

Coolant

Brake uid

windscreen washer uid

climate control system refrigerant

Only use products approved by Mercedes-Benz.

Damage caused by the use of products that have

not been approved is not covered by the

Mercedes-Benz warranty or goodwill gestures.

The operating uids approved by Mercedes-Benz

can be identied by the following inscriptions on

the container:

MB-Freigabe (e.g. MB-Freigabe 229.51)

MB-Approval (e.g. MB-Approval 229.51)

Further information on approved operating uids:

in the Mercedes-Benz Specications for Oper-

ating Fluids by entering the designation

At a qualied specialist workshop

WARNING Risk of re or explosion from

fuel

Fuels are highly ammable.

Fire, naked ames, smoking and creating

sparks must be avoided.

Before and during refuelling, switch o

the vehicle and, if tted, the stationary

heater.

WARNING Risk of injury from fuels

Fuels are poisonous and hazardous to your

health.

Do not swallow fuel or let it come into

contact with skin, eyes or clothing.

Do not inhale fuel vapour.

Keep children away from fuel.

Keep doors and windows closed during

the refuelling process.

If you or other people come into contact with

fuel, observe the following:

Immediately rinse fuel o your skin with

soap and water.

If fuel comes into contact with your eyes,

immediately rinse them thoroughly with

clean water. Seek medical attention

immediately.

If you swallow fuel, seek medical atten-

tion immediately. Do not induce vomit-

ing.

Change immediately out of clothing that

has come into contact with fuel.

Flexible-fuel vehicles can be refuelled with the fol-

lowing fuel types:

unleaded petrol

E85 fuel

a mixture of E85 fuel and unleaded petrol

Flexible-fuel vehicles can be identied by the

Ethanol up to E85 sticker on the inside of the fuel

ller ap.

828

Technical data

F167 0057 02

Depending on the country, the fuels you can use

in your vehicle may dier from the information in

the Owner's Manual. The fuels that have been

approved for your vehicle can be found on the

instruction label on the inside of the fuel ller ap.

Fuel

▌Information on fuel quality for vehicles with pet-

rol engines

Observe the notes on operating uids

(/ page 827).

NOTE Damage caused by the wrong fuel

Even small amounts of the wrong fuel could

result in damage to the fuel system, the

engine and the emission control system.

Refuel only with unleaded, sulphur-free

spark-ignition engine fuel.

Spark‑ignition engine fuel can contain up to

25% ethanol by volume.

See the information label in fuel ller ap

for compatible fuels.

Further information about compatible fuels

can be obtained at a qualied specialist work-

shop.

Throughout Europe you can also nd the com-

patibility labels on the fuel pump or pump noz-

zle suitable for your vehicle.

Never refuel with any of the following fuels:

Diesel

Regular petrol with an octane number

lower than 91 RON

petrol with more than 3% methanol by vol-

ume, e.g. M15, M30

Petrol with metallic additives

If you have accidentally refuelled with the

wrong fuel:

Do not switch on the vehicle.

Consult a qualied specialist workshop.

Compatibility marks for fuel:

These labels each indicate the maximum etha-

nol content with which vehicles can be refuel-

led.

If the available fuel is not suciently low in sul-

phur, it may produce unpleasant odours.

The recommended octane number can be found

on the information label on the fuel ller ap

(/ page 23).

If the recommended fuel is not available, you may

also temporarily use regular unleaded petrol with

an octane number of 91 RON. This may reduce

engine output and increase fuel consumption.

Never refuel using petrol with an even lower RON.

Technical data

829

F167 0057 02

Further information on fuel can be obtained at a

lling station or a qualied specialist workshop.

▌Information on fuel quality for Mercedes-AMG

vehicles

Observe the notes on operating uids

(/ page 827).

NOTE Damage caused by the wrong fuel

Even small amounts of the wrong fuel could

result in damage to the fuel system, the

engine and the emission control system.

Refuel only with unleaded, sulphur-free

spark-ignition engine fuel.

Spark‑ignition engine fuel can contain up to

25% ethanol by volume.

See the information label in fuel ller ap

for compatible fuels.

Further information about compatible fuels

can be obtained at a qualied specialist work-

shop.

Throughout Europe you can also nd the com-

patibility labels on the fuel pump or pump noz-

zle suitable for your vehicle.

Never refuel with any of the following fuels:

Diesel

Regular petrol with an octane number

lower than 91 RON

petrol with more than 3% methanol by vol-

ume, e.g. M15, M30

Petrol with metallic additives

If you have accidentally refuelled with the

wrong fuel:

Do not switch on the vehicle.

Consult a qualied specialist workshop.

The following compatibility marks for fuel may

apply to your vehicle:

For petrol with a maximum of 5% ethanol by

volume

For petrol with a maximum of 10% ethanol by

volume

For petrol with a maximum of 25% ethanol by

volume (not suitable for plug-in hybrid)

If the available fuel is not suciently low in sul-

phur, it may produce unpleasant odours.

The recommended octane number can be found

on the information label on the fuel ller ap

(/ page 23).

For maximum engine output: refuel only with

super unleaded petrol that has an octane number

of at least 98 RON. Alternatively, you can also

830

Technical data

F167 0057 02

refuel using premium-grade unleaded petrol with

an octane number of at least 95 RON.

In exceptional cases, if the recommended fuel is

not available, you may also use regular unleaded

petrol with an octane number of at least 91 RON.

This may reduce engine output and increase fuel

consumption.

Never refuel using petrol with an even lower RON.

Further information on fuel can be obtained at a

lling station or a qualied specialist workshop.

▌Information on additives in petrol (vehicles with

petrol engine)

Observe the notes on operating uids

(/ page 827).

NOTE Damage from use of unsuitable

additives

Even small amounts of the wrong additive may

lead to malfunctions occurring.

Only add cleaning additives recommen-

ded by Mercedes-Benz to the fuel.

Mercedes-Benz recommends that you use brand-

name fuels with additives.

In some countries, the fuel available may not have

sucient additives. Deposits could build up in the

fuel injection system as a result. In this case, in

consultation with a qualied specialist workshop

(e.g. a Mercedes-Benz service centre), mix the

fuel with the cleaning additive recommended by

Mercedes-Benz. Observe the notes and mixing

ratios indicated on the tank.

▌Information on fuel quality for vehicles with die-

sel engines

General notes

Observe the notes on operating uids

(/ page 827).

WARNING Risk of re from fuel mixture

If you mix diesel fuel with petrol, the ash

point of the fuel mixture is lower than that of

pure diesel fuel.

Never refuel using petrol in diesel

engines.

Never mix petrol with diesel fuel.

NOTE Damage caused by the wrong fuel

Even small amounts of the wrong fuel could

result in damage to the fuel system, the

engine and the emission control system.

Vehicles with diesel particulate lter:

Refuel using only sulphur-free diesel fuel.

In countries without sulphur-free diesel

fuel, refuel using only low-sulphur diesel

fuel with a sulphur content of less than

50 ppm.

Vehicles without diesel particulate lter:

Refuel using only diesel fuel with a sul-

phur content of less than 500 ppm.

Never refuel with one of the following fuels:

Petrol

Marine diesel

Heating oil

Technical data

831

F167 0057 02

Pure fatty acid methyl ester or vegetable

oil

Paran or kerosene

If you have accidentally refuelled with the

wrong fuel:

Do not switch on the vehicle.

Consult a qualied specialist workshop.

The following compatibility marks for fuel may

apply to your vehicle:

For diesel fuel with a maximum of 7% fatty

acid methyl ester by volume (bio-diesel)

For diesel fuel with a maximum of 10% fatty

acid methyl ester by volume (bio-diesel)

For diesel fuel with a maximum of 20% fatty

acid methyl ester by volume (bio-diesel)

For paranic diesel fuel

According to European standard EN 16942, you

can nd the compatibility marks at the following

locations:

On the vehicle, on the information label on the

fuel ller ap (/ page 23)

On the fuel dispensers or pump nozzles suita-

ble for your vehicle throughout Europe

Further information on fuel can be obtained at a

lling station or a qualied specialist workshop.

▌Tank content and fuel reserve (Mercedes-AMG

vehicles)

Not for Mercedes-AMG hybrid:

Total fuel tank capacity

Model

Mercedes-AMG GLE

53 4MATIC+ (SUV)

Mercedes-AMG GLE

53 4MATIC+ (Coupé)

85.0 litres

Fuel tank reserve

Model

Mercedes-AMG GLE

53 4MATIC+ (SUV)

Mercedes-AMG GLE

53 4MATIC+ (Coupé)

9.0 litres

832

Technical data

F167 0057 02

Total fuel tank capacity

Model

Mercedes-AMG GLE

63 S 4MATIC+ (SUV)

Mercedes-AMG GLE

63 S 4MATIC+

(Coupé)

85.0 litres

Fuel tank reserve

Model

Mercedes-AMG GLE

63 S 4MATIC+ (SUV)

Mercedes-AMG GLE

63 S 4MATIC+

(Coupé)

12.0 litres

Mercedes-AMG hybrid:

Total capacity of the fuel tank (Mercedes-AMG

hybrid)

Model

Mercedes-AMG GLE

53 hybrid (SUV)

Mercedes-AMG GLE

53 hybrid (Coupé)

65.0 litres

Fuel tank reserve (Mercedes-AMG hybrid)

Model

Mercedes-AMG GLE

53 hybrid (SUV)

Mercedes-AMG GLE

53 hybrid (Coupé)

9.0 litres

▌Tank content and fuel reserve

Not for plug-in hybrid:

Total fuel tank capacity

Model

All models 85.0 litres

Fuel tank reserve

Model

All models 9.0 litres

Plug-in hybrid:

Total fuel tank capacity (plug-in hybrid)

Model

All models 65.0 litres

Fuel tank reserve (plug-in hybrid)

Model

All models 9.0 litres

AdBlue

(vehicles with a diesel engine only)

▌Notes on AdBlue

Observe the notes on operating uids

(/ page 827).

AdBlue

is a water-soluble uid for the NOx

exhaust gas aertreatment of diesel engines.

Technical data

833

F167 0057 02

It may be improper or punishable in some coun-

tries to operate a vehicle that uses no AdBlue

one that does not comply with the specications

of this Owner's Manual.

NOTE Malfunctions due to the dilution of

AdBlue

or the use of additive-enhanced

AdBlue

The function of the NOx exhaust gas aer-

treatment can be impaired by the use of

unsuitable denoxication agents.

Only use AdBlue

in accordance with

ISO 22241.

Do not dilute AdBlue

with water.

Do not use additive-enhanced AdBlue

NOTE Damage and malfunctions due to

impurities in AdBlue

Consequences of impurities in AdBlue

increased emission values

damage to the catalytic converter

NOx exhaust gas aertreatment malfunc-

tions

Avoid impurities in AdBlue

AdBlue

residues crystallise aer a period of

time, and contaminate the surfaces with which

they come into contact. Clean the dirty surfaces

with water as soon as possible.

When you open the AdBlue

tank, small amounts

of ammonia vapour may escape. Do not inhale

any ammonia vapours that may be released. Only

ll the AdBlue

tank in well-ventilated areas.

▌AdBlue

lling quantity and consumption

Not for plug-in hybrid:

Total AdBlue

tank capacity

Model Total capacity

GLE 300 d 4MATIC

GLE 450 d 4MATIC

31.6 litres

Plug-in hybrid:

Total AdBlue

tank capacity (plug-in hybrid)

Model Total capacity

GLE 350 de 4MATIC 31.6 litres

AdBlue

consumption

The average AdBlue

consumption is between 1%

and 5% of fuel consumption. Like fuel consump-

tion, AdBlue

consumption is highly dependent

upon driving style and operating conditions. For

this reason, your vehicle's actual consumption g-

ures in day-to-day operating conditions may dier

from the average consumption gures calculated.

The frequency at which you will have to top up

AdBlue

will also vary. Have the AdBlue

supply

checked at a qualied specialist workshop before

making journeys outside Europe. Before a longer

stay outside Europe, consult a qualied specialist

workshop.

AdBlue

ll level and range

You can have the AdBlue

range and level dis-

played on the driver's display.

834

Technical data

F167 0057 02

The AdBlue

range shown depends strongly

on the driving style and operating conditions.

The actual range may therefore dier from the

range currently displayed on the driver's dis-

play.

The information supplied in the Owner's Manual

regarding the reserve quantity at the rst warning

on the driver's display and the minimum top-up

quantity when the AdBlue

tank is empty is also

to be understood as guide values.

Engine oil

▌Notes on engine oil

Observe the notes on operating uids

(/ page 827).

NOTE Engine damage caused by an incor-

rect oil lter, incorrect oil or additives

Do not use engine oils or oil lters other

than those which meet the specications

necessary for the prescribed service

intervals.

Do not alter the engine oil or oil lter in

order to achieve longer change intervals

than prescribed.

Do not use additives.

Have the engine oil changed aer the

prescribed intervals.

Mercedes-Benz recommends having the oil

changed at a qualied specialist workshop.

Only use engine oils approved for your vehicle by

Mercedes-Benz.

▌Engine oil quality and lling quantity (Mercedes-

AMG vehicles)

Not for Mercedes-AMG hybrid:

Engine oil specications

Model MB-Freigabe or MB-

Approval

Mercedes-AMG GLE

53 4MATIC+ (SUV)

Mercedes-AMG GLE

53 4MATIC+ (Coupé)

229.51, 229.52,

229.61, 229.71

229.72*

Mercedes-AMG GLE

63 S 4MATIC+ (SUV)

Mercedes-AMG GLE

63 S 4MATIC+

(Coupé)

229.5

229.51*

Technical data

835

F167 0057 02

* Recommended for the lowest possible fuel con-

sumption (lowest SAE viscosity class in each

case; observe possible restrictions of the

approved SAE viscosity classes)

To achieve the lowest possible fuel consumption,

it is recommended to use the engine oil specica-

tions marked in the table with the lowest SAE vis-

cosity class in each case. Possible restrictions of

the approved SAE viscosity classes must be

observed.

Mercedes-AMG GLE 63 S 4MATIC+ (SUV),

Mercedes-AMG GLE 63 S 4MATIC+ (Coupé): Use

only SAE 0W-40 or SAE 5W-40 engine oils.

If the engine oils listed in the table are not

available, you may add a maximum of 1.0 litre

of the following engine oils once only.

Engine oils for one-time lling only in exceptional

cases:

Mercedes-AMG GLE 53 4MATIC+ (SUV),

Mercedes-AMG GLE 53 4MATIC+ (Coupé):

MB-Freigabe or MB-Approval 229.51, 229.52,

229.61 or ACEA C5

All other models: MB-Freigabe or MB-Approval

was not available at the time of going to press.

Mercedes-AMG hybrid:

Missing values were not available by the editorial

deadline.

Engine oil specication (Mercedes-AMG hybrid)

Model MB-Freigabe or MB-

Approval

Mercedes-AMG GLE

53 hybrid (SUV)

Mercedes-AMG GLE

53 hybrid (Coupé)

* Recommended for the lowest possible fuel con-

sumption (lowest SAE viscosity class in each

case; observe possible restrictions of the

approved SAE viscosity classes)

To achieve the lowest possible fuel consumption,

it is recommended to use the engine oil specica-

tions marked in the table with the lowest SAE vis-

cosity class in each case. Possible restrictions of

the approved SAE viscosity classes must be

observed.

If the engine oils listed in the table are not

available, you may add a maximum of 1.0 litre

of the following engine oils once only.

Engine oils for one-time lling only in exceptional

cases:

Mercedes-AMG GLE 53 hybrid (SUV),

Mercedes-AMG GLE 53 hybrid (Coupé): MB-

Freigabe or MB-Approval 229.51, 229.52,

229.61 or ACEA C5

Not for Mercedes-AMG hybrid:

The following values refer to an oil change, includ-

ing the oil lter.

836

Technical data

F167 0057 02

Engine oil lling quantity

Model Quantity

Mercedes-AMG GLE

53 4MATIC+ (SUV)

Mercedes-AMG GLE

53 4MATIC+ (Coupé)

8.5 litres

Mercedes-AMG GLE

63 S 4MATIC+ (SUV)

Mercedes-AMG GLE

63 S 4MATIC+

(Coupé)

9.5 litres

Mercedes-AMG hybrid:

The following values refer to an oil change, includ-

ing the oil lter.

Engine oil lling quantity (Mercedes-AMG hybrid)

Model Quantity

Mercedes-AMG GLE

53 hybrid (SUV)

Mercedes-AMG GLE

53 hybrid (Coupé)

7.3 litres

▌Engine oil quality and lling quantity

Missing values were not available by the editorial

deadline.

Not for plug-in hybrid:

Engine oil specications (petrol engines)

Model MB-Freigabe or MB-

Approval

GLE 450 4MATIC 229.51, 229.52,

229.61, 229.71

229.72*

GLE 580 4MATIC 229.52

229.61*

Engine oil specications (diesel engines)

Model MB-Freigabe or MB-

Approval

GLE 300 d 4MATIC 229.52, 229.61,

229.71

229.72*

GLE 450 d 4MATIC 229.52

229.61*

* Recommended for the lowest possible fuel con-

sumption (lowest SAE viscosity class in each

case; observe possible restrictions of the

approved SAE viscosity classes)

To achieve the lowest possible fuel consumption,

it is recommended to use the engine oil specica-

tions marked in the table with the lowest SAE vis-

cosity class in each case. Possible restrictions of

the approved SAE viscosity classes must be

observed.

If the engine oils listed in the table are not

available, you may add a maximum of 1.0 litre

of the following engine oils once only.

Technical data

837

F167 0057 02

Engine oils for one-time lling only in exceptional

cases:

Petrol engines:

GLE 450 4MATIC: MB-Freigabe or MB-

Approval 229.31 or ACEA C3

GLE 580 4MATIC:MB-Freigabe or MB-

Approval 229.51 or ACEA C3

Diesel engines:

GLE 300 d 4MATIC: ACEA C3

GLE450 d 4MATIC: MB-Freigabe or MB-

Approval 229.51 or ACEA C3

Plug-in hybrid:

Engine oil specications (plug-in hybrid vehicles

with a petrol engine)

Model MB-Freigabe or MB-

Approval

GLE 400 e 4MATIC

Engine oil specications (plug-in hybrid vehicles

with a diesel engine)

Model MB-Freigabe or MB-

Approval

GLE 350 de 4MATIC

* Recommended for the lowest possible fuel con-

sumption (lowest SAE viscosity class in each

case; observe possible restrictions of the

approved SAE viscosity classes)

To achieve the lowest possible fuel consumption,

it is recommended to use the engine oil specica-

tions marked in the table with the lowest SAE vis-

cosity class in each case. Possible restrictions of

the approved SAE viscosity classes must be

observed.

If the engine oils listed in the table are not

available, you may add a maximum of 1.0 litre

of the following engine oils once only.

Engine oils for one-time lling only in exceptional

cases:

Petrol engines:

GLE 400 e 4MATIC: MB-Freigabe or MB-

Approval were not available at the time of

going to press.

Diesel engines:

GLE 350 de 4MATIC: MB-Freigabe or MB-

Approval were not available at the time of

going to press.

Not for plug-in hybrid:

The following values refer to an oil change, includ-

ing the oil lter.

Engine oil lling quantity

Model Quantity

GLE 300 d 4MATIC About 6.5 litres

GLE 450 4MATIC

GLE 450 d 4MATIC

About 8.5 litres

GLE 580 4MATIC About 9.5 litres

Plug-in hybrid:

The following values refer to an oil change, includ-

ing the oil lter.

838

Technical data

F167 0057 02

Engine oil lling quantity (plug-in hybrid)

Model Quantity

GLE 350 de 4MATIC 6.5 litres

GLE 400 e 4MATIC 5.3 litres

Notes on brake uid

Observe the notes on operating uids

(/ page 827).

WARNING Risk of an accident due to

vapour pockets forming in the brake sys-

tem

The brake uid constantly absorbs moisture

from the air. This lowers the boiling point of

the brake uid. If the boiling point is too low,

vapour pockets may form in the brake system

when the brakes are applied hard.

This impairs the braking eect.

Have the brake uid renewed at the

specied intervals.

Have the brake uid regularly replaced at a quali-

ed specialist workshop.

Only use a brake uid approved by Mercedes-

Benz according to MB-Freigabe or MB-Approval

331.0.

Coolant

▌Notes on coolant

Observe the notes on operating uids

(/ page 827).

WARNING Risk of re‑ and injury from

antifreeze

If antifreeze comes into contact with hot com-

ponent parts in the engine compartment, it

may ignite.

Allow the engine to cool down before

you top up the antifreeze.

Make sure that no antifreeze spills out

next to the ller opening.

Thoroughly clean the antifreeze from

component parts before starting the

vehicle.

NOTE Damage caused by incorrect cool-

ant

Only use coolant that has been premixed

with the required antifreeze protection.

Information on coolant is available at the fol-

lowing locations:

In the Mercedes-Benz Specication for

Operating Fluids 320.1

At a qualied specialist workshop

NOTE Overheating at high outside temper-

atures

If an inappropriate coolant is used, the cooling

system is not suciently protected against

overheating and corrosion at high outside

temperatures.

Only use coolant approved for

Mercedes-Benz.

Technical data

839

F167 0057 02

Observe the instructions in the

Mercedes-Benz Specications for Oper-

ating Fluids 320.1.

Have the coolant regularly replaced at a qualied

specialist workshop.

Proportion of antifreeze concentrate in the cool-

ing system:

A minimum of 50% (antifreeze protection down

to about -37°C)

A maximum of 55% (antifreeze protection

down to -45°C)

Notes on windscreen washer uid

Observe the notes on operating uids

(/ page 827).

WARNING ‑ Risk of re and injury due to

windscreen washer concentrate

Windscreen washer concentrate is highly am-

mable. It could ignite if it comes into contact

with hot engine component parts or the

exhaust system.

Make sure that no windscreen washer

concentrate spills out next to the ller

opening.

NOTE Damage to the exterior lighting due

to unsuitable windscreen washer uid

Unsuitable windscreen washer uids may

damage the plastic surface of the exterior

lighting.

Only use windscreen washer uids which

are also suitable for use on plastic surfa-

ces, e.g. MB SummerFit or MB WinterFit.

NOTE Blocked spray nozzles caused by

mixing windscreen washer uids

Do not mix MB SummerFit and MB Win-

terFit with other windscreen washer u-

ids.

Do not use distilled or de-ionised water. Other-

wise, the ll level sensor may be triggered errone-

ously.

Recommended windscreen washer uid:

above freezing point: e.g. MB SummerFit

below freezing point: e.g. MB WinterFit

For the correct mixing ratio, refer to the informa-

tion on the antifreeze container.

Mix washer uid with windscreen washer uid all

year round.

Vehicle data

Vehicle dimensions

The heights specied may vary as a result of the

following factors:

Tyres

Load

Condition of the suspension

Optional equipment

840

Technical data

F167 0057 02

Technical data -> Operating fluids for Your Mercedes GLE SUV Fourth Generation (2020-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals