2024-2026 Mg HS SUV Automatic Transmission* -> Protection Mode User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Automatic Transmission* -> Protection Mode for Your Mg HS SUV Second Generation (2024-2026)

DRIVE THE VEHICLE  
maximum speed allowable by the gear, the transmission  
will automatically upshift to an adjacent higher gear to  
protect the engine if there is no upshift request.  
In manual mode, push the electronic shift knob  
backward to the end to exit manual mode.  
Protection Mode  
When parking the vehicle, please ensure the  
vehicle is parked safely and that all traffic  
by-laws are observed.  
Automatic Transmission Overheat Protection  
Note: In D gear, operate the shift paddle to quickly  
enter the temporary manual mode or switch gears.  
If the shift paddle is not operated for a long period  
of time, it will automatically return to D gear.  
The automatic transmission may become very hot  
during frequent starts in hot environments or when the  
transmission is overloaded. To prevent transmission  
damage, the system will perform the overheat protection  
function and the instrument pack interface will display  
'High transmission temperature, please drive with caution'.  
Kick-down  
The drive wheels may skid when kick-down  
is activated on road surfaces with low  
adhesion, this may lead to the vehicle  
sliding out of control.  
The vehicle can still be driven but the transmission will  
perform torque limiting control to reduce transmission  
temperature. As the vehicle is driven and the transmission  
temperature drops to the normal range, the warning  
message in the instrument pack interface disappears and  
the transmission function returns to normal.  
With D gear selected, pressing the accelerator pedal all  
the way down in one motion (also known as Kick-down  
) will provide better acceleration performance during  
overtaking. At certain speeds, it will allow the transmission  
to shift to a lower gear immediately and provide fast  
acceleration. Once the accelerator pedal is released, it  
will resume a suitable higher gear (based on the vehicle  
speed and the position of the accelerator pedal).  
If the overheating alarm occurs frequently when the vehicle  
is driving smoothly, please seek an Authorised Repairer  
immediately.  
146  
DRIVE THE VEHICLE  
Limp Mode  
When this happens to the gear shift system, seek an  
Authorised Repairer immediately.  
When some failures occur, the transmission will enter  
Limp Mode and will only function in some gears, in some  
cases it may fail to reverse, during this time the instrument  
pack interface will display the engine emission malfunction  
indicator lamp. If this occurs, please contact an Authorised  
Repairer immediately.  
4
Note: In Limp Mode, manual mode is disabled.  
Transmission Fault  
When the transmission detects a serious fault, the engine  
emission malfunction indicator lamp will illuminate, at  
which point the system will forcibly cut off the power  
transmission in order to protect the transmission and the  
vehicle will not be able to be driven! If this occurs, please  
contact an Authorised Repairer immediately.  
Gear Shift System Failure  
When certain failures occur in the gear shift system, the  
P gear button indicator next to the gear display will flash.  
Please stop the vehicle as soon as safety permits and apply  
the EPB.  
147  

Related Topics

Popular Owner Manuals