2024-2026 Mg HS SUV Child Restraints For UK Region -> Fixing Child Restraints User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Child Restraints For UK Region -> Fixing Child Restraints for Your Mg HS SUV Second Generation (2024-2026)

LEAVE HOME SAFE  
Fixing Child Restraints  
Secured with ISOFIX/i-Size Device  
Secured Using Lap and Shoulder Belts  
WARNING  
Please DO NOT put the rearward facing  
child restraint on the front passenger seat  
with the front passenger airbag activated,  
this may cause serious injury or even death.  
The ISOFIX/i-Size anchorages in the rear  
seat are designed for use with ISOFIX/i-Size  
systems only.  
WARNING  
Child restraint anchorages are designed  
to withstand only those loads imposed by  
correctly fitted child restraints. Under no  
circumstances are they to be used for adult  
seat belts, harnesses or for attaching other  
items or equipment to the vehicle.  
5
The 2nd-row seats of this vehicle on both sides are  
provided with ISOFIX/i-Size interface (as indicated by the  
arrow in the figure below) connected to the ISOFIX/i-Size  
child restraint.  
When installing and removing any  
child restraint system, always follow the manufacturer's  
instructions.  
The child restraint can be secured to the rear seat by the  
lap and shoulder belts.  
195  
LEAVE HOME SAFE  
•
•
•
Insert the tapered plastic sleeve into ISOFIX/i-Size  
anchor between the seat cushion and backrest.  
Push the ISOFIX/i-Size attachment of the child restraint  
into the tapered plastic sleeve already fitted and snag it  
in the ISOFIX/i-Size anchor.  
The Top-tether (as arrowed in the figure above) for  
auxiliary fixation of the child restraint is provided at the  
back of the rear seat backrest. The single top-tether of  
the child restraint must pass through space between the  
rods of the rear seat headrest and dual tether must pass  
from both sides of the rear seat headrest.  
196  
LEAVE HOME SAFE  
Note:  
When using seat mounted, universally approved  
child restraint system, the top tether must be used.  
To fasten the top tether of the child restraint  
system, route the tether under the rear headrest  
and attach it to the anchorage hook.  
When fixing the top tether, be careful not to twist  
the top tether.  
5
If the ISOFIX/i-Size lower anchorages are not being  
used, using the seatbelt, complete the installation  
in line with the child restraint manufacture's  
instruction.  
•
After the installation, push or shake the child restraint  
with moderate force to confirm it is properly secured.  
197  

Related Topics

Child Restraints For UK Region
Important Safety Instructions about Using Child Restraints Child Restraint Groups and Installation Position

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot