DRIVE THE VEHICLE
Electric Drive Unit*
Instructions for Use
Gear Shift
The following information is very important; please read
carefully before use:
•
The electric drive unit is a high voltage unit; DO NOT
touch it without authorisation.
4
•
Before starting the vehicle, shift into P or N gear and
ensure that the brake pedal is depressed and EPB is
applied.
•
•
After starting the vehicle, with the brake and EPB still
applied, shift into the desired gear.
Turn off the EPB, keep the brake pedal depressed until
you are ready to manoeuvre the vehicle. On a flat
road, once the brake pedal is released, the vehicle will
automatically start to travel at a slow speed with the
accelerator pedal not depressed.
The electronic shift knob resides in the centre steady state
position, with two non-steady state positions forward or
backward, i.e., the electronic shift knob returns to the
centre steady state position once released.
Note: When moving out of the P gear or entering the
R gear, the brake pedal must be applied.
155
English 
