Get Seat Adjustment Guide for Mg HS SUV Second Generation (2024-2026)

COMFORTABLE EXPERIENCE

Seat Adjustment

Seat Positions and Backrest Angle State

To avoid personal injuries due to the loss of vehicle control, DO NOT adjust the seats while the vehicle

is in motion.

An ideal position of the seat shall ensure that you are in a comfortable driving posture, which allows you to hold the steering

wheel with your arms and legs slightly bent and conveniently control all the equipment in the car.

DO NOT incline the front seat backrest too far to the rear. Optimum beneﬁt is obtained from the seat belt with the

backrest angle set to approximately 25 ° from the upright (vertical). To mitigate the danger possibly caused by an airbag

being triggered, the driver and front passenger seats should be positioned as far rearward as practical. When the height of

the front seats needs to be lowered, it shall avoid trapping the feet of the rear passengers.

230

COMFORTABLE EXPERIENCE

Front Seats

Push the switch 1 along the direction of A to realise the

forward/rearward adjustment of the seat.

Cushion height adjustment^*

The functions of front seats differ depending on the model

conﬁgurations.

•

Move the switch 1 along the direction of B to realise the

cushion height adjustment.

Power Adjustment (with the driver side as an

example)

Backrest angle adjustment

Move the switch 2 forward/backward to adjust the

backrest angle.

Lumbar support adjustment^*

Long press the switch 3 to adjust the lumbar support to

a desired position.

6

•

Forward/rearward seat adjustment

231

COMFORTABLE EXPERIENCE

Manual Adjustment

Rear Seats

•

Folding Rear Seats

•

Forward/rearward seat adjustment

If you want to expand the loadspace, ﬁrst fully lower

(or remove) all the rear seat headrests and then pull up

the control handle respectively on both sides to fold the

seat backs forward.

Lift the handle 1, slide the seat into an appropriate

position, then release the handle, make sure that the

seat is locked in position.

Backrest angle adjustment

Lift the handle 2, adjust the backrest to an appropriate

angle; then release the handle, make sure that the

backrest is locked in position.

232

COMFORTABLE EXPERIENCE

Headrest Operation

Note: If the rear seat head restraints are not fully

lowered or the backrest of the front seat is inclined

backward excessively, the folding of the rear seat is

very likely to damage the back of the front seat, small

storage compartment or rear seat head restraint. If

the rear seat head restraints are not fully lowered or

the backrest of the front seat is inclined backward

excessively, the folding of the rear seats is very likely

to damage the back of the front seat or rear seat head

restraints.

Adjust the height of the head restraint so

that the top of it is in line with the top of the

occupant's head. This location may reduce

the risk of neck injuries in the event of a

collision. Do not adjust or remove the head

restraints while the car is moving.

Do not hang anything on any head restraint

or head restraint rod.

•

Unfolding and Locking Rear Seat Backrests

When unfolding the rear seat back again, pull up and

push the seat back until it reaches an appropriate

position and the seat back is locked when you hear a

click.

The headrest is designed to prevent rearward movement

of the head in the event of a collision or emergency braking,

thereby reducing the risk of head and neck injuries.

6

Note: When returning the rear seat backrest to the

desired position, make sure that the rear seat belts are

not trapped.

233

COMFORTABLE EXPERIENCE

When adjusting a headrest from a low to a high position,

pull the headrest directly upward and gently press it

downward after it reaches the desired position to make

sure that it is locked in position.

After the vehicle has been started, press the switch on the

corresponding side to turn on/adjust/off the seat heater

function. When the seat heating function is activated, the

indicator in the switch will illuminate. When the seat

cushion or the backrest reaches a certain temperature, the

heating function will be deactivated automatically.

To remove the headrest, press and hold the guide sleeve

button (as indicated by the arrow) on the left of the

headrest, then pull the headrest upward to remove it.

When adjusting a headrest from a high to a low position,

press the guide sleeve button (as indicated by the arrow) on

the left of the headrest and press the headrest downward;

release the button after it reaches the desired position and

gently press the headrest downward to make sure that it

is locked in position.

IMPORTANT

•

Do not cover the heated seats with blankets,

cushions or other insulation type objects or

materials.

When the seat heating function is used for an

extended period of time, if the seat exceeds certain

temperature and continues getting hotter, please

turn off the heating switch and contact an MG

Authorised Repairer.

Seat Heating Function^*

If bare skin is in contact with the heated

seats for excessive periods of time, it may

cause burns.

•

Overuse of the driver's heated seat may cause

drowsiness and could affect safety.

Based on different model conﬁgurations, the front seat

heating function has up to three adjustable levels.

Driver's Seat Memory Function^*

The front seat heater switch is located on the A/C control

interface and Seat interface of the entertainment display.

For vehicles provided with the memory function, users can

extensively personalise their seating position, i.e., matching

234

COMFORTABLE EXPERIENCE

the angle of the exterior rearview mirrors and the comfort

level of the driver seat (seat cushion height, seat fore and

aft position, seat back tilt angle, etc.). The personalised

settings can be made and recalled in the entertainment

display.

'Memorise' icon to save the seat position for the

current driver.

Repeat the following steps to add, name and store multiple

seat memory positions respectively. To recall a set seat

memory position, click the corresponding seat position

button.

For safety purposes, complete the personalisation settings

with the engine OFF and the doors closed. The setting

methods are as follows:

Repeat the following steps to add, name and store multiple

seat memory positions respectively. To recall a set seat

memory position, go to 'Vehicle Settings' - 'Vehicle Control'

- 'Driver Seat Memory', select the corresponding memory

position and click the 'Restore' icon.

1

With the Start switch in the 'ON' state, adjust the

position and angle of the driver seat separately and

then adjust the exterior rearview mirror angle (refer

to 'Rearview Mirrors' in 'Instrument and Control'

section for details).

6

Note: If an object blocks the driver seat from

moving forward or backward when the memory

position is recalled, the function will stop working.

If this happens, after moving the obstacle, press

the appropriate memory button to try to recall the

memory position again.

2

3

Click to enter the Seat interface on the entertainment

display, select and long press the corresponding seat

position button for 2 seconds to save the seat position

for the current driver.

Driver Seat Welcome Function^*

Click to enter the Settings interface on the

entertainment display, enter 'Vehicle Settings'

'Vehicle Control' 'Driver Seat Memory', select

the corresponding memory position and click the

-

The welcome function of the driver seat is designed to

facilitate the driver to get on and off the vehicle and it

allows the seat to automatically slide back and forth in a

speciﬁc situation.

-

235

COMFORTABLE EXPERIENCE

This function is merely provided for power seats with

memory function. Enter the Seat interface on the

entertainment display, click the settings button and enable

this function only after the Driver Seat Welcome Function

is enabled.

with the door closed, turn the start switch to the ACC

position, the seat will automatically slide forward to the

previous driving position the last time the vehicle was

used.

IMPORTANT

This function is merely provided for power seats with

memory function. Enter the Settings interface on the

entertainment display, go to 'Vehicle Settings' - 'Comfort

and Convenience' and enable this function only after the

Driver Seat Welcome Function is enabled.

During the automatic backward or forward movement

of the seat, any manual adjustment on the seat position

will interrupt the automatic operation.

When the welcome function of the seat is enabled,

the convenience of it can be reﬂected in the following

situations:

•

Exiting The Vehicle: When the car has come

to a stop, the engine has shut down and the Start

Switch is 'OFF', opening the door will trigger the seat

to automatically slide back, allow the driver to exit the

vehicle more comfortably.

Note: If the initial position of the driver seat is

already at the maximum position, the welcome

function will not be activated.

•

Entering the vehicle: Once the vehicle has been

unlocked and the operator has sat in the driver's seat

236

Seat Adjustment for Your Mg HS SUV Second Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals