LEAVE HOME SAFE
behind your back. In the event of an emergency braking
or collision, the shoulder belt will be tightened.
To ensure that the seat belts always provide maximum
protection, ensure the belt is flat, not loose and contacts
the body. Adjust seat belt to ensure it is not loose.
Seat Belt Upper Anchor Point Height
Adjustment
During driving, DO Not adjust the height of
seat belt.
Make sure the seat belt upper anchor point
has been adjusted to proper height and
locked in place or injury even death may be
caused in the event of a collision/accident.
When wearing seat belts, the lap belt section should be
positioned as low as possible across your hips (Never
cross the abdomen), so that in a collision accident, the lap
belt can apply force to the firm hips, reduce the possibility
of body moving under the lap belt and maximize the
protection for occupants against injury. This is because if
the accident occurs, the body moves under the lap belt,
causing the lap belt to apply force on abdomen, which
may cause serious or fatal injuries. The shoulder belt
should cross the middle of the shoulder and the chest.
Never cross your neck, arms or cross under your arms or
The front seat belts are equipped with an upper anchor
point height adjuster, so that the shoulder belt passes
through the middle of the shoulder (away from the face and
neck, but does not slide below the shoulder). Incorrect
positioning will reduce the efficiency of the seat belt in the
event of a collision or emergency braking.
174
English 
