Get Starting and Stopping Engine Guide for Mg HS SUV Second Generation (2024-2026)

DRIVE THE VEHICLE

Starting and Stopping Engine

Start Switch

When it is in OFF state, press the Start switch once only

to enter ACC state and the yellow light of the Start switch

illuminates and some electrical appliances (such as the

power window, etc.) can operate.

Green Light ( ON/RUNNING/READY )

•

When it is in ACC state, if no other operation is

required, press the Start switch again and the power

system will not start, the vehicle is in ON state, the

green light on the Start switch illuminates and some

electrical appliances such as the instrument can work.

All electrical appliances can work after the

power system is started and the vehicle is in

RUNNING/READY state.

•

Note: When the START/STOP Switch is turned off and

a door is opened, if the key is still in the car, the

horn will sound in succession when the door is closed.

The warning sound will emit when the door is opened

again and the warning icon and prompt message will

be displayed in the instrument pack to indicate that

Please Take Your Key.

The keyless start switch is located on the instrument panel

and is a push-button start switch. To operate the system,

the smart key must be in the car.

Each display state of the Start switch is described as follows:

Indicator Off ( OFF )

Strong radio signals may interfere with the keyless start

system. If your vehicle is close to strong radio signals, then

push-button start may be inoperative.

The power system is OFF in this position.

Yellow Light ( ACC )

136

DRIVE THE VEHICLE

Starting Power System

Do not start and run the engine for

long time in an unventilated room.

a

Exhaust fumes are harmful and contain

carbon monoxide, which can cause

unconsciousness or even death.

4

Starting Procedure

1

2

3

Switch off all unnecessary electrical appliances

(including the air conditioning);

Ensure the shift lever is in P position and press the

brake pedal;

Press the Start switch and immediately release it after

the power system is started.

1

2

Place the smart key to the position and at the angle as

illustrated.

Standby Starting Procedure

When the vehicle is in a strong radio signals interference

area or the smart key low battery occurs, please start the

vehicle by the standby starting procedure according to the

following steps:

Place the shift lever in P position, depress the brake

pedal, press the Start switch and start the power

system.

137

DRIVE THE VEHICLE

After the battery of smart key is replaced or the car leaves

the interference area, if the keyless starting procedure can

still not be used normally, seek an MG Authorised Repairer.

4

Press the Start switch to stop the power system.

IMPORTANT

•

If three consecutive attempts to start are

unsuccessful, please seek assistance. Otherwise,

multiple consecutive starts may cause damage to

the power system and battery.

•

This car is equipped with an anti-theft system. Any

privately prepared key cannot start the vehicle.

In environments with temperatures below -10

degrees Celsius, the time for the power system to

start will increase. Therefore, when starting, turn

off all unnecessary electrical equipments.

OFF

Stop the vehicle power system as follows:

1

After bringing the car to a stop, ALWAYS press the

brake pedal;

2

3

Apply the parking brake;

Place the shift lever in P position;

138

Starting and Stopping Engine for Your Mg HS SUV Second Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals