BRIEF INTRODUCTION TO VEHICLE FUNCTIONS
Window Operation
When the Start
ACC/ON/RUNNING/READY, the power window can be
operated (doors should be closed).
descend and open completely. . Window movement can be
stopped at any time by operating the corresponding switch
again during descent.
switch
is
in
position
2
'One-touch' Up and 'Anti-pinch'*
Depending on vehicle specification, some windows may
have the 'One-Touch' up function. Lifting the switch to the
2nd position (A) and releasing will automatically close the
window completely. Window movement can be stopped at
any time by briefly operating the switch again during ascent.
The 'Anti-pinch' function is a safety feature which prevents
the window from ascending and will descend a certain
distance automatically, if an obstacle is detected, allowing
the operator to remove the obstacle.
Note: The front and rear passenger windows can also
be operated by the individual window switch mounted
on each door. If the rear window isolation switch has
been activated, the window switches on rear doors will
not work.
Press the window control switch ( 2 ～ 5 ) down to the
1st Position ( C ) to lower the window. Pull the switch up
to the 1st position (B) will raise the window. The window
will stop moving as soon as the switch is released.
'One-touch' Down
Press the window control switch ( 2 ～ 5 ) down to the 2nd
Position ( D ) and release, the window will automatically
91
English 
