BRIEF INTRODUCTION TO VEHICLE FUNCTIONS
HI: Fast speed wipe
Wash and wipe
The wipers will operate at fast speed by pushing the lever
up to the fast speed wipe position (3).
Pulling the lever toward the steering wheel will operate the
front windscreen washers. After a short delay, the wipers
will commence operating in conjunction with the washers.
1x: Single wipe
Note: The wipers continue operating for three wipes
after the lever switch is released. After several seconds,
there will be a further wipe to remove any washer fluid
from the windscreen.
Pressing the lever down to the single wipe position (4)
and releasing will operate a single wipe. If the lever is
held in the single wipe position (4), the wiper will operate
continuously until the lever is released.
IMPORTANT
Note: When the car is stationary, if the bonnet is
opened, the front wiper/washer operation will be
disabled.
If the washers fail to deliver the screen wash solution
(dirt or ice may have blocked the jets), release the
lever immediately.
This will prevent the wipers
IMPORTANT
from operating and the consequent risk of visibility
being impaired by dirt smearing across the unwashed
windscreen.
•
•
Avoid operating the wipers on a dry windscreen.
In freezing or extremely hot conditions, make sure
that the wiper blades are not frozen or adhered to
the windscreen.
•
In winter, remove snow or ice from around the
wiper arms and blades, including the wiped area of
the screen.
78
English 
