Get Seats & Restraints -> Seats Guide for Mg Zs SUV First Generation (2017-2024)

SEATS & RESTRAINTS

Seats

be positioned as far rearward as practical. A properly

adjusted seat helps reduce the risk of injury from sitting

too close to an inﬂating airbag.

Overview

To avoid personal injuries due to the loss of

control, DO NOT adjust the seats while the

car is moving.

Head Restraints

Adjust the height of the head restraint so that

the top of it is in line with the top of the

occupant's head. This location may reduce

the risk of head and neck injuries in the event

of a collision. DO NOT adjust or remove the

head restraints while the car is moving.

The vehicle is equipped with 6-direction or 4-direction

adjustable front seats and 60/40 split rear seats with

foldable backrests.

An ideal position of the seat should make sure your driving

position is comfortable, which allows you to hold the

steering wheel with your arms and legs slightly bent and

control all the equipment. Make sure your driving position

is comfortable and enables you to maintain full control

of the vehicle. Take care when adjusting the height of

front seats - the feet of the rear passenger could become

trapped when the seat is lowered.

DO NOT hang anything on any head restraint

or head restraint rod.

The head restraint is designed to prevent rearward

movement of the head in the event of a collision or

emergency braking, thereby reducing the risk of head and

neck injuries.

Do not incline the front-seat backrest excessively.

Optimum beneﬁt is obtained from the seat belt with the

backrest angle set to approximately 25° from the upright

(vertical). The driver and front passenger seats should

108

SEATS & RESTRAINTS

Front Seats

Manual Seat

3

When adjusting a head restraint from low to high position,

pull the head restraint directly upward, and gently press

it downward after it reaches the desired position to

make sure that it is locked in position. To remove the

head restraint, press and hold the guide sleeve button (as

indicated by the arrow) on the left of the head restraint,

then pull the head restraint upward to remove it.

When adjusting a head restraint from high to low position,

press the guide sleeve button (as indicated by the arrow) on

the left of the head restraint, and press the head restraint

downward; release the button after it reaches the desired

position, and gently press the head restraint downward to

make sure that it is locked in position.

•

Forward/Backward Adjustment

Lift the lever (1) under the seat cushion, slide the seat

into an appropriate position and release the lever. Make

sure that the seat is locked in place.

*

Cushion Height Adjustment

109

SEATS & RESTRAINTS

Lift the lever (2) repeatedly to raise the seat cushion,

and press the lever downward to lower the seat

cushion.

•

Forward/Rearward Adjustment

Push the switch (1) forward or backward (A) to move

the seat forward/backward.

•

Backrest Adjustment

Cushion Height Adjustment

Lift the lever (3), adjust the backrest until it moves into

a satisﬁable position , and put down the lever.

Pull the switch (1) upward or push downward (B) to

raise or lower the seat cushion.

*

Power Seat

Backrest Adjustment

Move the switch (2) forward/backward to adjust the

backrest until it reaches the desired angle.

110

SEATS & RESTRAINTS

Rear Seats

inclined backward excessively, the folding of the rear

seat is very likely to damage the back of the front seat,

small storage compartment or head restraint of the

rear seat.

Unfolding and Locking Rear Seat Backrests

3

When returning the rear seat backrest to the upright

position, pull up the backrest unlock straps to release

the locked state, push the backrest until it reaches an

appropriate position, and the backrest is locked when you

hear a click.

Note: When returning the rear seat backrest to the

desired position, make sure that the rear seat belt is

not trapped.

Folding Rear Seats

*

Front Seat Heating

To increase luggage space, ﬁrst fully lower (or remove) all

the rear seat head restraints, and then pull up the backrest

unlock straps on both sides respectively and fold the seat

backrests forward.

If bare skin is in contact with the heated seats

for excessive periods of time, it may cause

burns.

Note: When the head restraint of the rear seat is

not fully lowered or the backrest of the front seat is

111

SEATS & RESTRAINTS

The seat cushion and backrest are provided with heating

elements. After starting the engine, pressing or will

activate the heaters.

When pressing a seat heater switch, the corresponding

seat will become warm. Press the switch again to stop

the heating function. When the seat heating function is

activated, the operating indicator in the switch illuminates.

When the cushion temperature reaches approximate 38℃

or the backrest to approximate 40℃, the heating function

will be deactivated automatically.

IMPORTANT

•

Do Not cover the heated seats with blankets,

cushions or other insulation type objects or

materials.

If the seat cushion is heated up to 38℃ or the

seat backrest is heated up to 40℃ and continues

getting hotter when using seat heating system, please

turn off the seat heating and contact MG Authorised

Repairer.

•

Overuse of the driver's heated seat may cause

drowsiness and could affect safety.

112

Seats & Restraints -> Seats for Your Mg Zs SUV First Generation (2017-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals