STARTING & DRIVING
The target speed of the cruise system will be set at the
current speed, and the cruise system will take effect. At
this time, the cruise control system will maintain the set
speed without pressing the accelerator pedal.
1 mph(1 km/h), then the vehicle will accelerate/decelerate
to the new target speed.
Pressing the accelerator at any time will override the cruise
control and allow acceleration to undertake manoeuvres
such as overtaking. Releasing the accelerator will return
the vehicle to the set target speed.
Note: The set speed held in the cruise control memory
will be cancelled when either the cruise control lever
is switched to "ASL Standby" position (figure 7) or the
START/STOP Switch turned off.
Pause/Stand By
Cruise control will be disengaged and set to 'Standby' if:
4
Target Cruise Speed Adjustment
•
Lever switch moved to 'Cruise Cancel' position (3 in
figure).
When the cruise control is active, the 'target speed' can be
increased or decreased:
•
•
•
•
•
•
Brake pedal pressed.
Auto gear lever moved to P, R or N.
Manual gear-change made.
Push the lever switch upwards (1 in figure), this will
increase the speed.
Clutch pedal pressed.
Push the lever switch downwards (2 in figure), this will
decrease the speed.
Conditions initiate SCS intervention.
An incline causes excessive decline in speed.
Release the lever switch when the desired speed is reached.
Resume
Push the lever switch upwards or downwards briefly to
increase/decrease the vehicle target speed in increments of
If the cruise control remains on after the disengagement,
moving the lever switch to 'Cruise Resume' (5 in figure)
205
English 
