2010-2017 Nissan Leaf 4 Door Appearance and care -> Cleaning exterior User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Appearance and care -> Cleaning exterior for Your Nissan Leaf 4 Door First Generation (2010-2017)

CLEANING EXTERIOR  
In order to maintain the appearance of your ve-  
hicle, it is important to take proper care of it.  
the effects of road salt. Therefore, these areas  
must be regularly cleaned. Make sure that the  
drain holes in the lower edge of the door are  
open. Spray water under the body and in the  
wheel wells to loosen the dirt and wash away  
road salt.  
CAUTION  
•
Do not use car washes that use acid in  
the detergent. Some car washes, espe-  
cially brushless ones, use some acid  
for cleaning. The acid may react with  
some plastic vehicle components,  
causing them to crack. This could af-  
fect their appearance, and also could  
cause them not to function properly.  
Always check with your car wash to  
confirm that acid is not used.  
Do not wash the vehicle with strong  
household soap, strong chemical de-  
tergents, gasoline or solvents.  
Do not wash the vehicle in direct sun-  
light or while the vehicle body is hot, as  
the surface may become water-  
spotted.  
To protect the paint surfaces, wash your vehicle  
as soon as you can:  
• after a rainfall to prevent possible damage from  
acid rain  
Avoid leaving water spots on the paint surface by  
using a damp chamois to dry the vehicle.  
• after driving on coastal roads  
• when contaminants such as soot, bird drop-  
pings, tree sap, metal particles or bugs get on  
the paint surface  
WAXING  
Regular waxing protects the paint surface and  
helps retain new vehicle appearance. Polishing is  
recommended to remove built-up wax residue  
and to avoid a weathered appearance before  
reapplying wax.  
• when dust or mud builds up on the surface  
•
•
Whenever possible, store or park your vehicle  
inside a garage or in a covered area.  
When it is necessary to park outside, park in a  
shady area or protect the vehicle with a body  
cover.  
A NISSAN certified LEAF dealer can assist you in  
choosing the proper product.  
•
Avoid using tight-napped or rough  
cloths, such as washing mitts. Care  
must be taken when removing  
caked-on dirt or other foreign sub-  
stances so the paint surface is not  
scratched or damaged.  
• Wax your vehicle only after a thorough washing.  
Follow the instructions supplied with the wax.  
Be careful not to scratch the paint surface  
when putting on or removing the body  
cover.  
• Do not use a wax containing any abrasives,  
cutting compounds or cleaners that may dam-  
age the vehicle finish.  
WASHING  
Wash dirt off the vehicle with a wet sponge and  
plenty of water. Clean the vehicle thoroughly  
using a mild soap, a special vehicle soap or  
general purpose dishwashing liquid mixed with  
clean, lukewarm (never hot) water.  
Rinse the vehicle thoroughly with plenty of clean  
water.  
Machine compound or aggressive polishing on a  
base coat/clear coat paint finish may dull the  
finish or leave swirl marks.  
Inside flanges, seams and folds on the doors,  
hatches and hood are particularly vulnerable to  
7-2 Appearance and care  
• NISSAN recommends that the road wheels be  
waxed to protect against road salt in areas  
where it is used during winter.  
REMOVING SPOTS  
cleaners or chlorine-based disinfectant  
cleaners. They could damage the electri-  
cal conductors, radio antenna elements  
or rear window defroster elements.  
Remove tar and oil spots, industrial dust, insects,  
and tree sap as quickly as possible from the paint  
surface to avoid lasting damage or staining. Spe-  
cial cleaning products are available at a NISSAN  
certified LEAF dealer or any automotive acces-  
sory stores.  
CAUTION  
SOLAR CELL MODULE (IF SO  
EQUIPPED)  
The solar cell uses a plastic cover. When clean-  
ing the cell:  
Do not use abrasive cleaners when wash-  
ing the wheels.  
Aluminum alloy wheels  
UNDERBODY  
Wash regularly with a sponge dampened in a  
mild soap solution, especially during winter  
months in areas where road salt is used. Salt  
could discolor the wheels if not removed.  
• Do not polish the solar cell using a dry cloth or a  
wax that contains a compound. Doing so may  
strip off the hard coating.  
In areas where road salt is used in winter, the  
underbody must be cleaned regularly. This will  
prevent dirt and salt from building up and causing  
the acceleration of corrosion on the underbody  
and suspension. Before the winter period and  
again in the spring, the underseal must be  
checked and, if necessary, re-treated.  
• In order to maintain the solar cell’s effective-  
ness, be sure to remove any leaves or dirt from  
the surface of the cell.  
CAUTION  
Follow the directions below to avoid  
staining or discoloring the wheels:  
WHEELS  
Wash the wheels when washing the vehicle to  
maintain their appearance.  
•
Do not use a cleaner that uses strong  
acid or alkali contents to clean the  
wheels.  
GLASS  
Use glass cleaner to remove smoke and dust film  
from the glass surfaces. It is normal for glass to  
become coated with a film after the vehicle is  
parked in the hot sun. Glass cleaner and a soft  
cloth will easily remove this film.  
•
Do not apply wheel cleaners to the  
wheels when they are hot. The wheel  
temperature should be the same as  
ambient temperature.  
• Clean the inner side of the wheels when the  
wheel is changed or the underside of the vehicle  
is washed.  
• Inspect wheel rims regularly for dents or corro-  
sion. Such damage may cause loss of pressure  
or poor seal at the tire bead.  
•
Rinse the wheel to completely remove  
the cleaner within 15 minutes after the  
cleaner is applied.  
CAUTION  
When cleaning the inside of the windows,  
do not use sharp-edged tools, abrasive  
Appearance and care 7-3  
CLEANING INTERIOR  
Occasionally remove loose dust from the interior  
trim, plastic parts and seats using a vacuum  
cleaner or soft bristled brush. Wipe the vinyl and  
leather surfaces with a clean, soft cloth damp-  
ened in mild soap solution, then wipe clean with a  
dry soft cloth.  
CHROME PARTS  
Clean chrome parts regularly with a non- abrasive  
chrome polish to maintain the finish.  
•
Small dirt particles can be abrasive  
and damaging to the leather surfaces  
and should be removed promptly. Do  
not use saddle soap, car waxes, pol-  
ishes, oils, cleaning fluids, solvents,  
detergents or ammonia-based clean-  
ers as they may damage the leather’s  
natural finish.  
Never use fabric protectors unless rec-  
ommended by the manufacturer.  
Do not use glass or plastic cleaner on  
meter or gauge lens covers. It may  
damage the lens cover.  
TIRE DRESSING  
NISSAN does not recommend the use of tire  
dressings. Tire manufacturers apply a coating to  
the tires to help reduce discoloration of the rub-  
ber. If a tire dressing is applied to the tires, it may  
react with the coating and form a compound. This  
compound may come off the tire while driving and  
stain the vehicle paint.  
Regular care and cleaning is required in order to  
maintain the appearance of the leather.  
•
•
Before using any fabric protector, read the manu-  
facturer’s recommendations. Some fabric pro-  
tectors contain chemicals that may stain or  
bleach the seat material.  
If you choose to use a tire dressing, take the  
following precautions:  
AIR FRESHENERS  
Use a cloth dampened only with water to clean  
the meter and gauge lens.  
Most air fresheners use a solvent that could affect  
the vehicle interior. If you use an air freshener,  
take the following precautions:  
• Use a water-based tire dressing. The coating on  
the tire dissolves more easily with an oil-based  
tire dressing.  
WARNING  
Do not use water or acidic cleaners (hot  
steam cleaners) on the seat. This can  
damage the seat or occupant classifica-  
tion sensor. This can also affect the op-  
eration of the air bag system and result in  
serious personal injury.  
• Hanging-type air fresheners can cause perma-  
nent discoloration when they contact vehicle  
interior surfaces. Place the air freshener in a  
location that allows it to hang free and not  
contact an interior surface.  
• Apply a light coat of tire dressing to help prevent  
it from entering the tire tread/grooves (where it  
would be difficult to remove).  
• Wipe off excess tire dressing using a dry towel.  
Make sure the tire dressing is completely re-  
moved from the tire tread/grooves.  
• Liquid-type air fresheners typically clip on the  
vents. These products can cause immediate  
damage and discoloration when spilled on inte-  
rior surfaces.  
• Allow the tire dressing to dry as recommended  
by the tire dressing manufacturer.  
CAUTION  
•
Never use benzine, thinner, or any  
similar material.  
7-4 Appearance and care  

Related Topics

Popular Owner Manuals