Get Safety-Seats, seat belts and supplemental restraint system -> Seats Guide for Nissan Leaf 4 Door Second Generation (2018-2025)

SEATS

•

Do not leave children unattended in-

side the vehicle. They could unknow-

ingly activate switches or controls or

make the vehicle move. Unattended

children could become involved in

serious accidents.

To help avoid risk of injury or death

through unintended operation of the

vehicle and/or its systems, do not

leave children, people who require

the assistance of others or pets unat-

tended in your vehicle. Additionally,

the temperature inside a closed ve-

hicle on a warm day can quickly be-

come high enough to cause a signifi-

cant risk of injury or death to people

and pets.

SSS0133

•

For the most effective protection

when the vehicle is in motion, the

seat should be upright. Always sit

well back and upright in the seat with

both feet on the floor and adjust the

seat properly. For additional infor-

mation, refer to “Precautions on seat

belt usage” in this section.

WARNING

•

Do not ride in a moving vehicle when

the seatback is reclined. This can be

dangerous. The shoulder belt will not

be against your body. In an accident,

you could be thrown into it and re-

ceive neck or other serious injuries.

You could also slide under the lap belt

and receive serious internal injuries.

•

Do not adjust the driver’s seat while

driving so full attention may be given

to vehicle operation. The seat may

move suddenly and could cause loss

of control of the vehicle.

The seatback should not be reclined

any more than needed for comfort.

Seat belts are most effective when

the passenger sits well back and

straight up in the seat. If the seatback

is reclined, the risk of sliding under

the lap belt and being injured is

increased.

•

After adjustment, gently rock in the

seat to make sure it is securely

locked.

1-2 Safety–Seats, seat belts and supplemental restraint system

CAUTION

When adjusting the seat positions, be

sure not to contact any moving parts to

avoid possible injuries and/or damage.

FRONT MANUAL SEAT

ADJUSTMENT (for passenger’s

seat and if so equipped for

driver’s seat)

Your vehicle seats can be adjusted manu-

ally. For additional information about ad-

justing the seats, refer to the steps outlined

in this section.

LRS2229

LRS2231

Forward and backward

Reclining

Pull the bar up and hold it while sliding the

seat forward or backward to the preferred

position. Release the bar to lock the seat in

position.

To recline the seatback, pull the lever up

and lean back. To bring the seatback for-

ward, pull the lever up and lean your body

forward. Release the lever to lock the seat-

back in position.

The reclining feature allows adjustment of

the seatback for occupants of different

sizes for added comfort and to help obtain

proper seat belt fit. For additional informa-

tion, refer to “Precautions on seat belt us-

age” in this section. Also, the seatback can

be reclined to allow occupants to rest

when the vehicle is stopped and the ve-

hicle is in the P (Park) position.

Safety–Seats, seat belts and supplemental restraint system 1-3

LRS2965

LRS2966

Seat lifter (driver’s seat)

FRONT POWER SEAT ADJUSTMENT Forward and backward

(if so equipped for driver’s seat)

Pull up or push down the adjusting lever to

adjust the seat height to the preferred

position.

Moving the switch as shown will slide the

seat forward or backward to the desired

position.

Operating tips

• The power seat motor has an auto-reset

overload protection circuit. If the motor

stops during operation, wait 30 seconds

then reactivate the switch.

Reclining

Move the recline switch as shown until the

desired angle is obtained.

• Do not operate the power seat switch for

a long period of time when the system is

not in the READY mode. This will dis-

charge the battery.

The reclining feature allows adjustment of

the seatback for occupants of different

sizes for added comfort and to help obtain

proper seat belt fit. For additional informa-

tion, refer to “Precautions on seat belt us-

age” in this section. Also, the seatback can

1-4 Safety–Seats, seat belts and supplemental restraint system

be reclined to allow occupants to rest

when the vehicle is stopped and the shift

lever is in P (Park).

LRS2967

LRS2968

Seat lifter

Lumbar support

Move the switch as shown to adjust the

angle and height of the seat cushion.

The lumbar support feature provides ad-

justable lower back support to the driver.

Move the switch as shown to adjust the

seat lumbar area.

Safety–Seats, seat belts and supplemental restraint system 1-5

•

Properly secure all cargo with ropes

or straps to help prevent it from slid-

ing or shifting. Do not place cargo

higher than the seatbacks. In a sud-

den stop or collision, unsecured

cargo could cause personal injury.

When returning the seatbacks to the

upright position, be certain they are

completely secured in the latched

position. If they are not completely

secured, passengers may be injured

in an accident or sudden stop.

LRS3233

REAR SEATS

WARNING

Folding

Before folding the rear seats

•

Do not fold down the rear seats when

occupants are in the rear seat area or

any objects are on the rear seats.

• Secure the seat belts on the seat belt

hooks located on the side wall. For addi-

tional information, refer to “Seat belt

hook” in this section.

Never allow anyone to ride in the

cargo area or on the rear seats when

they are in the folded-down position.

Use of these areas by passengers

without proper restraints could re-

sult in serious injury or death in an

accident or sudden stop.

To fold down the seatback, pull the release

knob.

To return the seatback to the seating posi-

tion, lift up each seatback and push it to the

upright position until it is latched.

1-6 Safety–Seats, seat belts and supplemental restraint system

Safety-Seats, seat belts and supplemental restraint system -> Seats for Your Nissan Leaf 4 Door Second Generation (2018-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals