HAZARD WARNING FLASHER SWITCH
FLAT TIRE
The flashers will operate with the ignition
switch placed in any position.
CHANGING A FLAT TIRE
If you have a flat tire, follow the instructions
below:
Some jurisdictions may prohibit the use
of the hazard warning flasher switch
while driving.
Stopping the vehicle
1. Safely move the vehicle off the road and
away from traffic.
2. Turn on the hazard warning flashers.
3. Park on a level surface and apply the
parking brake. Shift the automatic
transmission (if so equipped) to P (Park)
or the manual transmission (if so
equipped) to R (Reverse).
LIC0394
Push the switch on to warn other drivers
when you must stop or park under emer-
gency conditions. All turn signal lights flash.
4. Turn off the engine.
5. Raise the hood to warn other traffic
and to signal professional road assis-
tance personnel that you need assis-
tance.
WARNING
∙ If stopping for an emergency, be sure
to move the vehicle well off the road.
6. Have all passengers get out of the ve-
hicle and stand in a safe place, away
from traffic and clear of the vehicle.
∙
Do not use the hazard warning flashers
while moving on the highway unless
unusual circumstances force you to
drive so slowly that your vehicle might
become a hazard to other traffic.
∙ Turn signals do not work when the
hazard warning flasher lights are on.
6-2 In case of emergency
English 
