2021-2026 Nissan Qashqai SUV Appearance and care -> Cleaning interior User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Appearance and care -> Cleaning interior for Your Nissan Qashqai SUV Third Generation (2021-2026)

CLEANING INTERIOR  
Occasionally remove loose dust from the  
interior trim, plastic parts and seats using  
a vacuum cleaner or soft bristled brush.  
Wipe the vinyl and leather surfaces with a  
clean, soft cloth dampened in mild soap  
solution, then wipe clean with a dry soft  
cloth.  
Regular care and cleaning is required in  
order to maintain the appearance of the  
leather.  
Before using any fabric protector, read  
the manufacturer’s recommendations.  
Some fabric protectors contain chemicals  
that may stain or bleach the seat materi-  
al.  
CHROME PARTS  
CAUTION  
Clean chrome parts regularly with a non-  
abrasive chrome polish to maintain the  
finish.  
.
.
Never use benzine, thinner, or any  
similar material.  
TIRE DRESSING  
For cleaning, use a soft cloth,  
dampened with water. Never use  
a rough cloth, alcohol, benzine,  
thinner or any kind of solvent or  
NISSAN does not recommend the use of  
tire dressings. Tire manufacturers apply a  
coating to the tires to help reduce dis-  
coloration of the rubber. If a tire dressing  
is applied to the tires, it may react with  
the coating and form a compound. This  
compound may come off the tire while  
driving and stain the vehicle paint.  
paper towel with  
a
chemical  
cleaning agent. They will scratch  
or cause discoloration to the lens.  
.
.
Do not spray any liquid such as  
water on the meter lens. Spraying  
liquid may cause the system to  
malfunction.  
Small dirt particles can be abra-  
sive and damaging to the leather  
surfaces and should be removed  
promptly. Do not use saddle soap,  
car waxes, polishes, oils, cleaning  
fluids, solvents, detergents or  
ammonia-based cleaners as they  
may damage the leather’s natural  
finish.  
If you choose to use a tire dressing, take  
the following precautions:  
Use a cloth dampened only with water, to  
.
.
Use a water-based tire dressing. The  
coating on the tire dissolves more  
easily with an oil-based tire dressing.  
Apply a light coat of tire dressing to  
help prevent it from entering the tire  
tread/grooves (where it would be  
difficult to remove).  
clean the meter and gauge lens.  
WARNING  
Do not use water or acidic cleaners  
(hot steam cleaners) on the seat. This  
can damage the seat or occupant  
classification sensors. This can also  
affect the operation of the air bag  
system and result in serious perso-  
nal injury.  
.
.
Wipe off excess tire dressing using a  
dry towel. Make sure the tire dressing  
is completely removed from the tire  
tread/grooves.  
Allow the tire dressing to dry as  
recommended by tire dressing manu-  
facturer.  
.
.
Never use fabric protectors un-  
less recommended by the manu-  
facturer.  
Do not use glass or plastic cleaner  
on meter or gauge lens covers. It  
7-4 Appearance and care  
CarManuals2.com  
may damage the lens cover.  
.
.
NEVER place a floor mat on top of  
another floor mat in the driver  
front position or install them up-  
side down or backwards.  
It is recommended that you use  
only genuine NISSAN floor mats  
specifically designed for use in  
your vehicle model and model  
year.  
Properly position the mats in the  
floorwell using the floor mat po-  
sitioning hooks. See “Floor mat  
installation” (P.7-5).  
AIR FRESHENERS  
Most air fresheners use a solvent that  
could affect the vehicle interior. If you use  
an air freshener, take the following pre-  
cautions:  
.
Hanging-type air fresheners can  
cause permanent discoloration when  
they contact vehicle interior surfaces.  
Place the air freshener in a location  
that allows it to hang free and not  
contact an interior surface.  
Liquid-type air fresheners typically clip  
on the vents. These products can  
cause immediate damage and disco-  
loration when spilled on interior sur-  
faces.  
.
JVA0018X  
.
.
Make sure the floor mat does not  
.
interfere with pedal operation.  
Floor mat installation  
Periodically check the floor mats  
to make sure they are properly  
installed.  
After cleaning the vehicle interior,  
check the floor mats to make  
sure they are properly installed.  
Your vehicle is equipped with floor mat  
positioning hook(s). The number and  
shape of the floor mat positioning hook  
(s) for each seating position varies de-  
pending on the vehicle.  
Carefully read and follow the manufac-  
turer’s instructions before using air fresh-  
eners.  
FLOOR MATS  
.
When installing genuine NISSAN floor  
mats, follow the installation instructions  
provided with the floor mat and the  
following:  
1. Position the floor mat in the floorwell  
so that the floor mat grommet holes  
are aligned with the hook(s).  
The use of genuine NISSAN floor mats can  
extend the life of your vehicle carpet and  
make it easier to clean the interior. Mats  
should be maintained with regular clean-  
ing and replaced if they become exces-  
sively worn.  
WARNING  
To avoid potential pedal interference  
that may result in a collision, injury  
or death:  
2. Secure the grommet holes into the  
hook(s) and ensure that the floor mat  
Appearance and care 7-5  
CarManuals2.com  
is properly positioned.  
dye, or chemical solvents to clean  
the seat belts, since these materials  
may severely weaken the seat belt  
webbing.  
3. Make sure the floor mat does not  
interfere with pedal operation. With  
the ignition in the OFF position and  
the shift lever in the P (Park) position  
(Continuously Variable Transmission  
(CVT) models) or the shift lever in the  
N (Neutral) position (Manual Transmis-  
sion (MT) models), fully apply and  
release all pedals. The floor mat must  
not interfere with pedal operation or  
prevent the pedal from returning to its  
normal position. It is recommended  
you see a NISSAN dealer for details  
about installing the floor mats in your  
vehicle.  
CLEANING THE SEAT TRACKS  
CAUTION  
Periodically clean the seat tracks to  
prevent reduction of ability to move  
the seats.  
JVA0031X  
Clean periodically with a high-powered  
vacuum cleaner. Dirt and debris may  
reduce the ability to adjust the seat. A  
wet cleansing agent may be used if  
necessary.  
Positioning hook(s)  
The illustration shows the location of the  
floor mat positioning hook(s).  
SEAT BELTS  
The seat belts can be cleaned by wiping  
them with a sponge dampened in a mild  
soap solution. Allow the belts to dry  
completely in the shade before using  
them.  
See “Seat belts” (P.1-12).  
WARNING  
Do not allow wet seat belts to roll up  
in the retractor. NEVER use bleach,  
7-6 Appearance and care  
CarManuals2.com  

Related Topics

Popular Owner Manuals