Get Instruments and Controls -> Trip Computer Guide for Peugeot 1007 4 Door First Generation (2005-2009)

1

TRIP COMPUTER

System which provides current infor-

mation concerning the route travelled

(range, consumption, ...).

The trip computer data is the following:

Zero reset

Monochrome display A

-

the range,

the current consumption,

the distance travelled,

the average consumption,

the average speed.

Data displays



Press the control for more than

two seconds to reset the dis-

tance travelled, the average con-

sumption and the average speed

to zero.

-



Press the button, located at the

end of the wipers stalk, to dis-

play the various items of trip

computer data in succession.

-



The next press then returns you

to the normal display.

27

1

Data displays

- the route "2" tab with:

ꢀ the distance

TRIP COMPUTER

travelled,

ꢀ the average

consumption,

ꢀ the average speed,

for the second route.

System which provides current infor-

mation concerning the route travelled

(range, consumption, …).

Monochrome display C

Route zero reset



Press the button, located at the

end of the wipers stalk, to dis-

play the various trip computer

tabs in succession:

Colour display

- the current information

tab with:

ꢀ the range,

ꢀ the current

consumption,

ꢀ the distance

remaining to be

travelled,



When the route required is dis-

played, press the control for

more than two seconds.

- the route "1" tab with:

ꢀ the distance

The routes "1" and "2" are inde-

pendent but their use is identical.

Route "1" permits, for example, daily

calculations, and route "2" monthly

calculations.

travelled,

ꢀ the average

consumption,

ꢀ the average speed,

for the ﬁrst route.

28

1

A few definitions…

Range

(km or miles)

Current consumption

(l/100 km or km/l or mpg)

Distance remaining to be

travelled

(km or miles)

This is the distance remaining to be

travelled to the ﬁnal destination. It

is either calculated instantly by the

navigation system if guidance is acti-

vated, or entered by the user.

If the distance is not entered, dashes

are displayed in place of the digits.

This indicates the number of miles

(or kilometres) which can still be

travelled with the fuel remaining in

the tank in relation to the average

consumption over the last few miles

(kilometres) travelled.

This is the average quantity of fuel

consumed over the last few sec-

onds.

This function is only displayed

from 20 mph (30 km/h).

This ﬁgure may increase fol-

lowing a change of driving

style or relief, resulting in a

signiﬁcant change in the cur-

rent consumption.

Average consumption

(l/100 km or km/l or mpg)

Average speed

(km/h or mph)

This is the average speed

calculated since the last

trip computer zero reset

(ignition on).

This is the average quantity of fuel

consumed since the last trip computer

zero reset.

When the range falls below 20 miles

(30 km), dashes are displayed. After

ﬁlling with at least 5 litres of fuel, the

range is recalculated and is displayed

when it exceeds 60 miles (100 km).

Distance travelled

(km or miles)

This indicates the distance travelled

since the last trip computer zero reset.

If dashes are displayed con-

tinuously while driving in

place of the digits, contact a

PEUGEOT dealer.

29

1

"TRIP COMPUTER" MENU

Display C

"DIAGNOSTICS" MENU

System which provides general infor-

mation concerning the status of certain

equipment with which your vehicle is

equipped, such as the warnings log,

the status of the functions...



Press the "MENU" button to gain

access to the general menu.

Press the arrows, then the "OK"

button to select the "Trip computer"

menu.

Colour display



Press the "MENU" button to gain

access to the general menu.



Turn the dial and press it to

select the "Diagnostics" menu.

Warnings log

This summarises the active warning

messages, displaying them in suc-

cession on the multifunction display.

Status of the functions



On the "Trip computer" menu,

select one of the following appli-

cations:

This summarises the active or inac-

tive status of the functions present on

the vehicle.

Enter the distance to the

destination

This enables you to enter an approxi-

mate value for the distance to the ﬁnal

destination.



On the "Diagnostics" menu,

select one of the following appli-

cations:

30

Instruments and Controls -> Trip Computer for Your Peugeot 1007 4 Door First Generation (2005-2009)

Related Topics

Instruments and Controls