Get INSTRUMENTS AND CONTROLS Guide for Peugeot 106 4 Door 1996-2003

18

INSTRUMENTS AND CONTROLS

10

8

11

1

2

3

4

5

6 7

9

21

19 18 17

16 15

14

13

12

20

6 - Low fuel level

7 - Fuel gauge

8 - Right-hand indicator

9 - Rev. counter

10- Clock adjustment, lighting rheostat

11 - Oil pressure

12- Engine autodiagnostics* (petrol)

13- Front* and side** airbag warning

light and passenger airbag

disarm*

17- Rear fog lamp

Instrument panel (Petrol)

1 - Maximum coolant temperature

2 - Display control:

- total distance display

- trip recorder - trip recorder reset

- service indicator

3 - Speedometer

4 - Display:

18- Front fog lamps*

19- Main beam

20- Dipped beam

21- Passenger airbag disarm

- digital clock

- service indicator

- total distance

- trip recorder

14- ABS* (Anti-lock Braking System)

15- Handbrake, low brake fluid level

and engine not running

* According to speciﬁcation or country.

** According to model.

5 - Left-hand indicator

16- Battery charge

06-05-2002

19

INSTRUMENTS AND CONTROLS

10

11

9

12

2

1

3

4

5

6

7 8

23

22

21 20 19

18 17

16 15

14

13

6 - Left-hand indicator

7 - Low fuel level

8 - Fuel gauge

16- ABS* (Anti-lock Braking System)

17- Handbrake, low brake ﬂuid level

and engine not running

18- Battery charge

Instrument panel (Petrol)

1 - Coolant temperature gauge

2 - Maximum coolant temperature

3 - Display control:

- total distance display

- trip recorder - trip recorder reset

- service indicator

4 - Speedometer

5 - Display:

9 - Right-hand indicator

10- Rev. counter

19- Rear fog lamp

11 - Clock adjustment, lighting rheostat

12- Oil temperature gauge

13- Engine autodiagnostics* (petrol)

14- Front* and side** airbag warning

light and passenger airbag

disarm*

20- Front fog lamps*

21 - Main beam

- digital clock

- service indicator

- oil level gauge

- total distance

22- Dipped beam

23- Passenger airbag disarm

* According to speciﬁcation or country.

** According to model.

- trip recorder

15- Oil pressure

06-05-2002

20

INSTRUMENTS AND CONTROLS

10

11

1

2

3

4

5

6

8

7

9

19 18 17

16 15

21

20

14

13 12

6 - Low fuel level

7 - Fuel gauge

15- Handbrake, low brake fluid level

and engine not running

16- Battery charge

Instrument panel (Diesel)

1 - Maximum coolant temperature

2 - Display control:

- total distance display

- trip recorder - trip recorder reset

- service indicator

3 - Speedometer

4 - Display:

8 - Right-hand indicator

9 - Rev. counter

17- Rear fog lamp

18- Front fog lamps*

19- Main beam

10- Clock adjustment, lighting rheostat

11 - Oil pressure

20- Dipped beam

12- Pre-heat (diesel)

21- Passenger airbag disarm

- digital clock

13- Front* and side** airbag warning

light and passenger airbag

disarm*

- service indicator

- total distance

- trip recorder

* According to speciﬁcation or country.

** According to model.

5 - Left-hand indicator

14- ABS* (Anti-lock Braking System)

06-05-2002

21

INSTRUMENTS AND CONTROLS

Warning lamps

Handbrake and brake

ﬂuid level warning

lamp

High coolant

temperature

warning lamp

Indicates either:

Diesel engine pre-heat

It is essential to stop.

Indicates too high a temperature,

caused by:

- that the engine is not running,

- that the handbrake is on or has

not been released correctly

(engine running),

- an excessive drop in the brake

ﬂuid level (engine running and

handbrake released).

Note : with the engine running and

the handbrake off, if the warning

light remains lit then you must stop.

Wait until the warning lamp goes

out then operate the starter. On

some models the warning lamp will

not light when the engine is hot.

-

a fan malfunction. Check the fuses

and replace them if necessary,

-

a coolant leak; the cooling system is

pressurised, turn the cap to the 1st

notch, or* unscrew the cap two turns,

to let the pressure drop before

topping up the level,

Battery charge

warning lamp

Consult a PEUGEOT dealer.

Indicates either:

- faulty operation of the charging

circuit, or

- a coolant pump malfunction.

B

- loose battery or starter terminals,

or

A

- broken or slack alternator belt, or

- a faulty alternator.

Consult a PEUGEOT dealer.

Low engine oil

pressure

Anti-lock brake system

warning lamp (ABS)*

It is essential to stop.

Indicates either:

- insufﬁcient engine oil pressure,

or

Coolant temperature gauge

- Needle in zone (A): temperature

correct

- Needle in zone (B): the coolant

temperature is too high

Indicates faulty ABS operation.

The vehicle does, however, retain

conventional braking.

Consult a PEUGEOT dealer.

-

lack of oil in the lubrication system.

Top up the oil level if necessary.

Consult a PEUGEOT dealer.

06-05-2002

22

INSTRUMENTS AND CONTROLS

Low fuel level

warning

Engine auto-diagnostics

warning light*

It comes on each time the ignition is

switched on.

Indicates that the quantity of fuel

remaining is less than 1 gallon

[5 litres] (Tank capacity approxima-

tely 10 gallons [45 litres]).

If it comes on with the engine run-

ning it indicates a malfunction in the

injection, ignition or emission

control system. If your vehicle is ﬁt-

ted with a catalytic converter, there

is a risk of damage to it.

AIR

BAG

Front and side*

airbags

Contact a PEUGEOT dealer rapidly.

If the passenger airbag is armed or

if your vehicle is not ﬁtted with a

passenger airbag, the warning light

comes on for 6 seconds when the

ignition is switched on.

Oil temperature gauge*

F

Fuel supply cut-off*

If there is a major collision, a device

switches off the supply of fuel to the

engine.

E

To re-establish the supply to the

engine, press the button.

Front airbag disarmed

If the passager airbag is disarmed,

the indicator light remains on.

In all cases, if the warning light

flashes, contact a PEUGEOT dealer.

- If the needle is in zone E, the

temperature is correct.

- If the needle is in zone F, the

temperature is too high. To lower

the temperature of the oil, reduce

your speed.

* According to speciﬁcation

06-05-2002

22

INSTRUMENTS AND CONTROLS

Low fuel level

warning

Engine auto-diagnostics

warning light*

It comes on each time the ignition is

switched on.

Indicates that the quantity of fuel

remaining is less than 1 gallon

[5 litres] (Tank capacity approxima-

tely 10 gallons [45 litres]).

If it comes on with the engine run-

ning it indicates a malfunction in the

injection, ignition or emission

control system. If your vehicle is ﬁt-

ted with a catalytic converter, there

is a risk of damage to it.

AIR

BAG

Front and side*

airbags

Contact a PEUGEOT dealer rapidly.

If the passenger airbag is armed or

if your vehicle is not ﬁtted with a

passenger airbag, the warning light

comes on for 6 seconds when the

ignition is switched on.

Oil temperature gauge*

F

Fuel supply cut-off*

If there is a major collision, a device

switches off the supply of fuel to the

engine.

E

To re-establish the supply to the

engine, press the button.

Front airbag disarmed

If the passager airbag is disarmed,

the indicator light remains on.

In all cases, if the warning light

flashes, contact a PEUGEOT dealer.

- If the needle is in zone E, the

temperature is correct.

- If the needle is in zone F, the

temperature is too high. To lower

the temperature of the oil, reduce

your speed.

* According to speciﬁcation

06-05-2002

23

INSTRUMENTS AND CONTROLS

Instrument panel display

When the ignition is switched on, this display shows in turn, the following infor-

mation:

- digital clock,

A

- service indicator,

- oil level indicator,*

- total distance.

Total distance and trip recorder

Engine oil level

One brief press on button A changes the

display between total distance and the

trip recorder.

When the ignition is switched on, engine not running, the service indicator is dis-

played for a few seconds, then the engine oil level is indicated for approximate-

ly 10 seconds.

Maximum

Minimum

Check the level with the dipstick and top it up. The ﬁgure shown

is only correct if the vehicle has been on stable, level ground, with

the engine stopped, for 10 minutes.

Resetting the trip recorder to zero

No oil

A long press on the button resets the trip

recorder to zero.

When the LEDs ﬂash, it is essential to top up the oil to the correct

level, otherwise the engine will be damaged.

* According to speciﬁcation

06-05-2002

24

INSTRUMENTS AND CONTROLS

When the distance remaining

before the next service is less

than 1000 km.

SERVICE INDICATOR

When a service is overdue.

For ﬁve seconds after the ignition is

switched on, the service symbol and

the excess distance ﬂash.

This is a reminder of when the next

service is due in accordance with the

manufacturer’s maintenance sche-

dule.

Example: 900 km remain before the

next service is due.

For ﬁve seconds after the ignition is

switched on, the display shows:

Example: the service is overdue by

300 km The vehicle should be servi-

ced very soon.

Operation

When the ignition is switched on the

display shows the distance remai-

ning (rounded ﬁgures) before the

next service is due.

For 5 seconds after the ignition is

switched on the display shows:

Example: 4800 km remain before

the next service is due. For ﬁve

seconds after the ignition is switched

on, the display shows:

5 seconds after switching on the igni-

tion the display resumes normal ope-

ration. This indicates that a service

should be carried out shortly:

5 seconds after switching on the igni-

tion the display resumes normal ope-

ration.

5 seconds after switching on the igni-

tion the display resumes normal ope-

ration and shows the total and trip

distances.

06-05-2002

25

INSTRUMENTS AND CONTROLS

- Switch on the ignition.

Service intervals

Reset to zero

Your PEUGEOT dealer will carry out

this operation after each service.

If your vehicle is used in certain par-

ticularly difficult conditions it is

necessary to follow the "Arduous

conditions" servicing schedule,

which involves shorter intervals bet-

ween services (see the Warranty

and Maintenance Record booklet).

- Release the button straight away.

- The service interval is displayed.

However, if you carry out your

service yourself, the zero reset

procedure is as follows:

- Each time button 1 is pressed

brieﬂy, the service intervals are

alternated.

-

switch off the ignition,

press and hold button 1,

switch on the ignition,

Comment: If the time limit between

two services is reached before the

relevant mileage limit, the service

spanner symbol will light up and the

display will show 0.

Example

keep button

10 seconds,

the display indicates [= 0] and the

service spanner symbol disappears.

1

pressed for

To change the service interval

1

- When the required service interval

is displayed, press button 1 for

10 seconds to confirm (the

selected service interval ﬂashes

for 10 seconds).

-

Switch off the ignition.

Press and hold button 1.

Release the button to conﬁrm when

the display stops ﬂashing.

06-05-2002

25

INSTRUMENTS AND CONTROLS

- Switch on the ignition.

Service intervals

Reset to zero

Your PEUGEOT dealer will carry out

this operation after each service.

If your vehicle is used in certain par-

ticularly difficult conditions it is

necessary to follow the "Arduous

conditions" servicing schedule,

which involves shorter intervals bet-

ween services (see the Warranty

and Maintenance Record booklet).

- Release the button straight away.

- The service interval is displayed.

However, if you carry out your

service yourself, the zero reset

procedure is as follows:

- Each time button 1 is pressed

brieﬂy, the service intervals are

alternated.

-

switch off the ignition,

press and hold button 1,

switch on the ignition,

Comment: If the time limit between

two services is reached before the

relevant mileage limit, the service

spanner symbol will light up and the

display will show 0.

Example

keep button

10 seconds,

the display indicates [= 0] and the

service spanner symbol disappears.

1

pressed for

To change the service interval

1

- When the required service interval

is displayed, press button 1 for

10 seconds to confirm (the

selected service interval ﬂashes

for 10 seconds).

-

Switch off the ignition.

Press and hold button 1.

Release the button to conﬁrm when

the display stops ﬂashing.

06-05-2002

INSTRUMENTS AND CONTROLS for Your Peugeot 106 4 Door 1996-2003

Related Topics

Popular Owner Manuals

Latest Owner Manuals